you could put a solar panel on the roof and then run a 12 volt fan off of it and a 12 volt pump to circulate the coolant?
Printable View
you could put a solar panel on the roof and then run a 12 volt fan off of it and a 12 volt pump to circulate the coolant?
There is plans for a solar heater similar to the "can heater" shown, that uses convection action for the heat and does not use a fan.
I used the 12 fl oz aluminum variety.. (What occupied the volume before terminal use is up to the builder.. :) )
I just can't see how you'll cut the tops off of aluminum drink cans and have anything left that's usable ; )
You could run a pump or fan in a variety of ways. You have to do the math. You would need a battery of some size to regulate the voltage.Quote:
Originally Posted by jghilino
For example, one of the fans I put a link to was 2.5 amps. You can very inexpensively get a solar panel that puts out 2.5 amps, but as soon as a cloud passes by you will no longer be getting 2.5 amps, which obviously affects the fan (not enough juice to run). This would happen all day and most likely burn out the fan (or pump). A simple, cheap, 5ah battery solves this problem.
I personally would want a bigger battery, it would seem that a 10ah battery would be a better choice as it will run the fan for 4 hours unassisted by the solar panel.
What would end up happening is that you will use a little of the juice from the battery from time to time, but it would quickly charge in the morning when the heater hasn't reached a high enough temp to cut the fan on but there is sunlight.
Basically all you want is a thin membrane to absorb the solar rays and conduct the heat on its natural rise upward... :)Quote:
Originally Posted by Bear
Do-It-Yourself Solar Heat Collectors
Here is about 10-11 variations of the heat grabber, all a little different.
A few without fans.
Been stock piling parts to build a waste oil heater that will have a copper coil around it to heat water that will end up running thru a box with a a/c coil and a fan or a car radiator that still has the 12v fans attached.
Gave the heater a booster today, had an old mirror I placed at an angle in front of it to reflect more light on the heater, seems to improve the output.
You guys are all awesome. Just wanted to throw that in. Been offline for a while and this was the first post I saw.
Do you plan on setting up the burner unit (firebox) outside? This is the setup employed up here in rural areas. In my area, it's difficult or almost impossible to get house insurance having an indoor furnace burning waste oil, wood or whatever.Quote:
Originally Posted by KzScrapper
Second question - how are you going to filter the oil or are you just going to let it settle?
I would be very interested to hear your results on this project.
I would be burning outside in an area where I do breakdowns that is next to my office then running a line inside the office with the hot water.
When I dump the oil to store in 5 gal buckets I strain it thru 1/8" screen to get the big stuff and I'm hoping between that and other sediment settling to the bottom it's good to go but won't know till I try.
This has me thinking. How about taking some corrugated tin and stacking one on top of the other with the ridges creating the air channels? I think I'm going to start tinkering and see what comes of it.
For the DIY people (do-it-yourself) here is a link with all kinds of info and tips, just about anything you can think of, they have done it.
MOTHER EARTH NEWS - Organic Gardening, DIY, Renewable Energy, Homesteading And Livestock, Real Food, Natural Health, Nature And Environment, Green Homes, Green Transportation
Inside some computer power supplys theres a little board added that starts the fan up, depending on the tempature.
The fan is connected directly to the matchbox sized board.
That counld be used so the fan only works when the air in the heater is hot enough, rather than forcing air thru it all the time.
I use a snap thermostat on mine, turns the fan on at 120 and off at 90 degrees.
Oh, I forgot, I think the board makes the fan change speed so it stays at a constant tempature.Quote:
Originally Posted by Ironhunter