Results 1 to 15 of 15

its good to have community...

| Off Topic Discussions
  1. #1
    DakotaRog started this thread.
    DakotaRog's Avatar
    SMF Badges of Honor



    Member since
    Aug 2014
    Posts
    1,611
    Thanks
    602
    Thanked 1,675 Times in 830 Posts

    its good to have community...

    Anybody want to beat up on Best Buy?? A friend of ours, a single mom with more sacrificial love than I’ll ever muster (has been foster parent to a good number of kids, has adopted several over time) was going to have a double mastectomy two Mondays ago and her washing machine had broken down. With 8 people in the family including 4 boys under 10, clothes pile up quickly. So she decided to buy a new machine at Best Buy the day before her surgery. Even spent extra coin on Geek Squad coverage.

    4 full days later (last Thurs.) the new washer craps out. Calls are made and Best Buy and Whirlpool point fingers at each other, “not our problem” they each say. WP sends a tech out a couple days back. “Yep, it’s the mother board.” Now one would think, with everything so digital, the tech would have a spare MB in his truck. Nope, the model is too new, have to special order it (probably at least 10 days). Back at Best Buy, maybe the Geek Squad can be out in a couple of weeks or you’ll have to bring the machine back in to get it looked at any sooner.

    Enter friend Brian M. He’s willing to take the machine in with his truck but decides to stop by the store first and try to shame Best Buy a bit. Brian probably handled it much more calmly than I would have because I have a short fuse for both incompetency and arrogance, especially when presented in the same package. Bottom line Best Buy replaced the machine. Bottom line we hauled the old machine up the stairs and the new one back down again. Bottom line it’s a good thing to own a solid hand cart along with a good cinch strap at the house that made things go a lot better. Good to have some strong young lads as well. Best Buy and all the big box stores should learn some sense of scale. But then again that might be too much to ask of most corporate America…

  2. The Following 14 Users say Thank You for This Post by DakotaRog:



  3. #2
    SMF Badges of Honor

    Member since
    Oct 2012
    Location
    Alabama
    Posts
    764
    Thanks
    1,067
    Thanked 1,213 Times in 471 Posts
    Thanks to you and Brian her family can wash clothes again. Good going. That's how things should work.



    I almost gave up on corporations learning anything like that until last week. I sent my 9mm Ruger in to the factory because I broke the safety (it stuck and some idiot, me, tried to move it with a dowel and hammer and twisted the lever). They sent me a box and shipping label. I sent it in and 8 days later it came back fixed with new parts. FREE!!! They said the safetys had a recall on another issue and they would have replaced it anyway. I love Ruger more now.

  4. #3
    DakotaRog started this thread.
    DakotaRog's Avatar
    SMF Badges of Honor



    Member since
    Aug 2014
    Posts
    1,611
    Thanks
    602
    Thanked 1,675 Times in 830 Posts
    Very cool!! I own several Rugers over the years. My Mk. II I've had over 30 years and the second Mini-14 probably 25...

  5. #4
    SMF Badges of Honor

    Member since
    Oct 2012
    Location
    Alabama
    Posts
    764
    Thanks
    1,067
    Thanked 1,213 Times in 471 Posts
    Love the Mk II, never had one though. My mini 14 and GP100 357 are sweet but my first love is the Single Six 22 I got for my 18th birthday. People tell me that Ruger's service department cannot be beat and now I've seen it in action and believe it.

  6. #5
    ItAllAddsUp's Avatar
    SMF Badges of Honor


    Member since
    Dec 2014
    Location
    New Jersey
    Posts
    68
    Thanks
    41
    Thanked 73 Times in 36 Posts
    Wow, I have had recent experience with both companies. I had an Amana (whirlpool owns them) washer crap out after 1.5 years and got nowhere. Now I happily own a Samsung. Had a stupid user error (me) while cleaning my wife's Ruger .22 LITE and the took it back, fixed it no charge and had it back too us quick as could be. My next purchase is likely a Ruger now.

  7. #6
    SMF Badges of Honor

    Member since
    Dec 2012
    Location
    Virginia Beach, VA
    Posts
    345
    Thanks
    643
    Thanked 620 Times in 191 Posts
    I have in the past run into a big issues that were not being handled well locally. So I post the issue to social media on the place I'm having an issue with. They reply very fast!
    Both times my issue was addressed and fixed in just a few hours. This may not work for smaller places but the big box stores have teams that monitor social media just for this kind of thing.

    Small print: Your results may very.
    I'm going to recycle the world.

  8. The Following 2 Users say Thank You for This Post by Tincankeith:


  9. #7
    NHscrapman's Avatar
    SMF Badges of Honor


    Member since
    Jan 2013
    Location
    new hampshire
    Posts
    1,582
    Thanks
    4,076
    Thanked 2,176 Times in 941 Posts
    Dakotarog and Brian M are top notch in my book!
    sooo MB's in washers now huh???
    cuz that's exactly what they need....facepalm...... put that tidbit away for I dunno 5 years or so...hehehe

    Rugers are generally a well built, reliable gun... gotta keep that image.
    There is a 10/22 around here somewhere all beat up held together with tape lol, but still throws lead at the pests.
    There ain't nothing wrong with an honest days work. Anyone who says otherwise is a fool.- Old Man

  10. #8
    AdmiralAluminum's Avatar
    SMF Badges of Honor


    Member since
    Jan 2014
    Location
    Ontario
    Posts
    737
    Thanks
    824
    Thanked 968 Times in 415 Posts
    Best Buy used me to cover their a$$es earlier this week. I got a call to pick up a projection tv from a guy who said Best Buy referred him to me. I was very curious so I went and started asking him about the referral. He told me that the geek squad showed up with his new tv and refused to take the old one because of "liability issues" I don't think the geek squad likes stairs! I brought help but could have done it myself (it was a small one) and while there the client told me when he called and complained that he was told they would remove it, the Best Buy employee gave him my number! I had no idea I was an auxillary member of the geek squad!
    METAL IS MY MISTRESS...PLEASE DON'T TELL MY WIFE!

  11. The Following User Says Thank You to AdmiralAluminum for This Post:


  12. #9
    logansryche's Avatar
    SMF Badges of Honor


    Member since
    Sep 2014
    Location
    Jamestown, TN
    Posts
    1,215
    Thanks
    1,043
    Thanked 564 Times in 367 Posts
    Quote Originally Posted by DakotaRog View Post
    Anybody want to beat up on Best Buy?? A friend of ours, a single mom with more sacrificial love than I’ll ever muster (has been foster parent to a good number of kids, has adopted several over time) was going to have a double mastectomy two Mondays ago and her washing machine had broken down. With 8 people in the family including 4 boys under 10, clothes pile up quickly. So she decided to buy a new machine at Best Buy the day before her surgery. Even spent extra coin on Geek Squad coverage.

    4 full days later (last Thurs.) the new washer craps out. Calls are made and Best Buy and Whirlpool point fingers at each other, “not our problem” they each say. WP sends a tech out a couple days back. “Yep, it’s the mother board.” Now one would think, with everything so digital, the tech would have a spare MB in his truck. Nope, the model is too new, have to special order it (probably at least 10 days). Back at Best Buy, maybe the Geek Squad can be out in a couple of weeks or you’ll have to bring the machine back in to get it looked at any sooner.

    Enter friend Brian M. He’s willing to take the machine in with his truck but decides to stop by the store first and try to shame Best Buy a bit. Brian probably handled it much more calmly than I would have because I have a short fuse for both incompetency and arrogance, especially when presented in the same package. Bottom line Best Buy replaced the machine. Bottom line we hauled the old machine up the stairs and the new one back down again. Bottom line it’s a good thing to own a solid hand cart along with a good cinch strap at the house that made things go a lot better. Good to have some strong young lads as well. Best Buy and all the big box stores should learn some sense of scale. But then again that might be too much to ask of most corporate America…
    Rog, I'm sorry to hear your friend is in the hospital and hope all goes well for her. That said, I'm surprised it was the board. My experience with their new washers has been the motors frying themselves and the fittings on the back stripping themselves. I don't blame Whirlpool or Best buy - I put blame on the companies who made these parts(Whirlpool doesn't make parts in-house).

    That said, glad you got everything situated. I'd honestly put my 100% in a good used washer instead of a brand new one. The pair here in the house are going on 8 years without an issue. It's another example how companies are building parts cheaper so you have to replace it or buy a new one. Car mfgrs do it too, It's rediculas.

    -Matt

  13. #10
    travistemple202020's Avatar
    SMF Badges of Honor


    Member since
    Jul 2012
    Location
    ames iowa
    Posts
    1,326
    Thanks
    267
    Thanked 883 Times in 495 Posts
    if its any consolation best buy wont be around in a couple of years right now they are trying to deplete there inventory so most things like appliances and tvs such they have order only on as there trying to at least save things from burning lol

  14. The Following User Says Thank You to travistemple202020 for This Post:


  15. #11
    AdmiralAluminum's Avatar
    SMF Badges of Honor


    Member since
    Jan 2014
    Location
    Ontario
    Posts
    737
    Thanks
    824
    Thanked 968 Times in 415 Posts
    Quote Originally Posted by travistemple202020 View Post
    if its any consolation best buy wont be around in a couple of years right now they are trying to deplete there inventory so most things like appliances and tvs such they have order only on as there trying to at least save things from burning lol
    Why do you say they won't be around?

  16. #12
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Quote Originally Posted by logansryche View Post
    I don't blame Whirlpool or Best buy - I put blame on the companies who made these parts(Whirlpool doesn't make parts in-house).
    Whirlpool chooses who to buy their parts from and profits from the products they build...Best Buy then profits from selling these products making customer service both their responsibility.

    I don't think my construction biz would have lasted more then two decades if when there was a warranty issue, I just said it's not my fault...I didn't grow that tree or build that window. I was the person they hired to build their project and it was up to me to make sure it was done right or fixed.
    Last edited by KzScrapper; 03-20-2015 at 06:41 PM.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  17. The Following 2 Users say Thank You for This Post by KzScrapper:


  18. #13
    Scrappah's Avatar
    SMF Badges of Honor



    Member since
    Jun 2014
    Posts
    1,058
    Thanks
    320
    Thanked 1,419 Times in 676 Posts
    Quote Originally Posted by AdmiralAluminum View Post
    Why do you say they won't be around?
    Best Buy got wounded when the recession hit. While quite a few of the big retailers (ie: Circuit City) when into bankruptcy B.B. struggled through. It just remains to be seen if they will survive.

    You might Google " Best Buy Bankruptcy Rumors " for more of the story.

  19. The Following User Says Thank You to Scrappah for This Post:


  20. #14
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,781 Times in 3,853 Posts
    A lot of big box stores are going by by.

    Thank the inability to adjust pricing to compete with internet sites an other places among many other things..

    Change or get run over. I see Best Buy with a lot of tire marks on their backs in the future. They really do dislike change.

    Sirscrapalot - Not a fan of Best Buy or Big box stores.

  21. #15
    DakotaRog started this thread.
    DakotaRog's Avatar
    SMF Badges of Honor



    Member since
    Aug 2014
    Posts
    1,611
    Thanks
    602
    Thanked 1,675 Times in 830 Posts
    Thanks for all the "thanks" folks. It felt better to do some venting!!

  22. The Following User Says Thank You to DakotaRog for This Post:



  23. Similar threads on the Scrap Metal Forum

    1. Saying hello to the community
      By bnawa38 in forum Introduce yourself
      Replies: 2
      Last Post: 03-06-2015, 08:31 AM
    2. community service...
      By DakotaRog in forum Off Topic Discussions
      Replies: 6
      Last Post: 11-07-2014, 09:19 PM
    3. my community service
      By NHscrapman in forum A Day in the Life of a Scrapper
      Replies: 11
      Last Post: 04-15-2014, 06:37 AM
    4. Lessons learned from a terrific community!
      By DWJ in forum A Day in the Life of a Scrapper
      Replies: 3
      Last Post: 10-15-2013, 03:00 PM
    5. New to the community !!!
      By Andrewkrisht in forum Introduce yourself
      Replies: 11
      Last Post: 11-27-2012, 07:13 AM

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook