Standard 6-foot Power Cable or Power Cord

I wanted to do a simple experiment and share my results. I started with 25 standard 6' power cables from computer towers and monitors. They were all slightly different and not exactly the same make and manufacturer. In all of the pictures I posted, I already tared out the box on my scale, so the weights shown are for just the cables. The 25 cables weighed 9 pounds 5 ounces, or roughly 6 ounces each (3/8 of a pound).

http://www.qmarketinggroup.com/ecycle/pics/wires_01.jpg

If I don't clip the ends, my yard buys these as low recovery at $0.34 per pound, which is $3.19 for the lot, or about for $0.13 each power cable. If I clip the ends, they buy the ends as transformers at $0.18 per pound and the wires become insulated #2 copper at $0.71 per pound. It took about 10 minutes to clip the ends of all of them using a normal pair of kitchen scissors. After clipping them the transformers weighed 2 pounds 11 ounces, about 29% of the total weight, and the wires weighed 6 pounds 10 ounces, about 71% of the total weight.

http://www.qmarketinggroup.com/ecycle/pics/wires_06.jpg
http://www.qmarketinggroup.com/ecycle/pics/wires_07.jpg

The value of the wires after clipping them, using my yard's pricing, was $0.48 for the transformers and $4.70 for the wires, or $5.18 for the lot, or about $0.20 per power cable. The values will change if you put in your yard's pricing, and your yard may not even require you to clip the ends off. For me this excercise earned me a couple of extra bucks in 10 minutes time. My yard actually paid me for 3 pounds of transformers, and 8 pounds of wires, so I got paid $6.22 for them, which is close to $0.25 per power cable.

I did not strip the wires because I do not currently have a suitable safe stripping solution. Once I get it worked out, I may strip a few and add the results to this post in the future. I hope someone finds this information useful. I was doing the test for myself anyway, so I thought I'd share the results.

I doubt these are worth strippin

Think thats kind of a given unless ur yard takes em w the ends attached like some on here have stated..no point in strippin monitor cables..i do take off the gold connecters..they got crappy aluminum sheathing thats a pain..ill strip regular power cords though..only takes two mins..ive always lost track when ive attempted an experiment..but when I get bored I feel its worth it to strip em

I always take the ends and pull the metal out of them, I get paid brass for them. I wait and do that when I'm slow around here.

I run across some with copper sheathing. They aren't all aluminum.

these weren't monitor cables. he said they were all power cables. like this:

http://www.pacificgeek.com/productimages/xl/05120P.jpg

good info on the weights and percentages. thanks for sharing!

I understand what he said.
Quick search. I'm not the only one who has come across braided copper sheath in power cables.
http://www.scrapmetalforum.com/scrap...ed-copper.html

Quote:

---

Originally Posted by toula

I understand what he said.
Quick search. I'm not the only one who has come across braided copper sheath in power cables.
http://www.scrapmetalforum.com/scrap...ed-copper.html

---

i know you did. that image was for 888 who mentioned gold plated connector ends.

Boy those are pretty low prices. I get 1.05 with the blugs on the only ones I cut off are gold pin blugs. Transformers I get .32#.

Yeah, I call three or four different yards before I take a load anywhere, and they all pretty much pay comparably low prices around here. I suppose my average load of a few hundred pounds makes me a small time player worthy of small ptime prices. I'll keep learning and getting better, and eventually I will develop the right relationship, with the right yard. For now, the prices are suitable during my learning phase.