Buying Scrap Memory all kinds.... gold, silver, metal/rambus, slot cpus

sent another shipment to dennis today, already have my money, hard drive boards, gold ram, silver ram, 512mb ram sticks were included in this shipment

Quote:

---

Originally Posted by BRASSCATCHER

Just completed my first transaction with Denis.....Medium flat rate box of approx 21# of gold ram,silver ram, slot proc and rambus. I sent it down on tuesday, recvd on thursday, processed and cut check today. Total payout was $311.91 !!! Looking forward to doing more business with him in the future. Glad he found his way to SMF.

---

Hes like tony the tiger. Hes Grrrrrreat!!!!

Great transaction! He met me after hours and had me in an out in 15 minutes. Will be doing business again in the future for sure.

Im really glad I joined this forum...Im from Philly but currently working out of Lawrenceville GA...Im still new so, how do I get in contact with you phillyscrapbuyer? I recently after doing some research starter focusing more on e-waste, just need help selling it. Thanks everyone who posted its very helpful info!

Quote:

---

Originally Posted by MrGoGreen

Im really glad I joined this forum...Im from Philly but currently working out of Lawrenceville GA...Im still new so, how do I get in contact with you phillyscrapbuyer? I recently after doing some research starter focusing more on e-waste, just need help selling it. Thanks everyone who posted its very helpful info!

---

Here's his email address; DCRecycling@ymail.com

Here's how you PM him, http://www.scrapmetalforum.com/priva...=newpm&u=14036

I just sent a small box of RAM and Rambus RAM. Denis was great answering questions when I got my shipment ready.
He processed the lot quickly and the check is on the way. Can't say enough good about the transaction.

Dennis,
I will be sending a package of silver ram and rambus to you tomorrow. Total of about 50 pounds.
Randy

a while back I sent a 70 lb box of hd boards to Dennis. all went very professionally with out a hitch.

I normally use one buyer , and am very happy with them and a few pennies in price does not sway me however $1. a lb gets my attention. thanks Dennis.

I sent Dennis 17 some pounds of RAM and i have been very happy and impressed with the service. I sent the box over my lunch hour tuesday and it was delivered to him today (thursday) and by the end of the day I had a payment in my paypal account. Definatly top notch service getting the stuff paid for the day it was recieved. Very happy 5/5 start and will be sending him as much ram as i can get.

Quote:

---

Originally Posted by ROKrecycling

Dennis,
I will be sending a package of silver ram and rambus to you tomorrow. Total of about 50 pounds.
Randy

---

Thanks I'm looking forward to it!

Completed my first transaction with Dennis today. I sent him a flatrate box of memory and i must say his prices are great. Was easy to deal with and promptly payed me after i confirmed the weights. I would reccomend Dennis, and will use him again. Thanks to member posts on this forum i gave him a shot and was not disappointed! Thanks Dennis.

This is my first transaction with Dennis. I sent 620# of hard drive boards and 6# of ram. He has been quick with responses excellent buyer. Getting my next load ready to get shipped out to him in about a week. I highly recommend this buyer.

Do you buy them if so Wat price

Motherboards i meant to say

Quote:

---

Originally Posted by twoonesicks

Greets!

Just got back from seeing Denis over the weekend of December 1st. I brought him (about) 1600 pounds of memory, 400 pounds of hard drive boards, as well as all of my slot chips and rambus.

He was very quick with his e-mails. We were e-mailing each other from noon til 10 that night. Very responsive and detail oriented.

Drive was nice, very mountainous if you're coming from the West. I was driving from Cleveland. Also 4 tunnels if you take the turnpike....just a warning.

The payment came to over $30,000.

It went as smooth as it could have. I drove it all there in my truck, and got the chance to meet and shake hands with Denis. Real friendly guy, real simple stuff. Everything is cut and dry. Pulled my truck into his heated shop, unloaded everything with a tow motor. Weighed everything in front of each other, agreed on weights and that was that. No smoke and mirrors here.

http://i.imgur.com/hwnBV.jpg

He drove me to the bank in his vehicle, where I got the chance to meet his bank manager. Everyone was extremely friendly, and seemed to know Denis personally. He handed me over the signed certified check, we shook hands and I left. Real quick in and out. Check cleared in 7 days. Half of it cleared in 3.

Thanks again Denis,

Josh

Edit: OKAY --- My Fiance has a huge issue with what I posted for Denis' review. She does not think that the drive was that bad. I ... hate driving when the cliff to the left looks like my imminent death. I, on the other hand, was literally ****ting myself the whole time. /sarcasm off I feel like a real wuss towards anyone who lives by the rockies by the way.

---

How did you aquire so much memory?

Do you buy them

Motherboards

Email me dcrecycling@ymail.com

Quote:

---

Originally Posted by BRASSCATCHER

Nice load and payday....btw they have meds now for all your anxieties:)

---

true but, if you take them you will soon be on the mental, NO GUN, list :).

Drove up to see these guys yesterday and was in and out in fifteen minutes green for green my type of company I'll definitely be back
Thanks Dennis

Denis is as good as it gets. I've sent him material numerous times in the past few months ranging from $100-$1500...he's always paid ASAP after receiving my invoice. Also willing to answer questions. More than a buyer, he's a great resource in general. If you haven't taken the opportunity to sell material to Denis yet, I highly suggest you do so.

I understand your fear of the driving mountain thing but your imagination of what would happen could be a good story line...

Quote:

---

Originally Posted by twoonesicks

The guy who bought it from is the pimp. Imagine what HIS load looks like :cool:

edit: I also want to add how relieved I was to make it there safely. I have a 95 F-150. 2600 pounds including my cap was what I was hauling. Also, I white knuckle over bridges, through the mountains and go about 25 mph through tunnels. I have a HUUUGE fear of something happening to my vehicle while driving it.

double edit: I had my Fiance and dog with me as well. So if something DID happen .... oh man. I just imagine going down hill with the weight, making a right turn around a bank through the mountains when suddenly ..... boom driver side front tie rod goes, entire truck does a nosedive into the barrier. Either we go off the cliff or we're pancaked between the wall and the load. That's what goes through my head and it drives me nuuuts.

Sorry, got a bit off topic there.

---

I look to sell about 100 lbs of broads motherboads gold pins all kinds would like some info tnank you

I have about 100 lbs of computer broads I want to sell but need help

Quote:

---

Originally Posted by brick82

I have about 100 lbs of computer broads I want to sell but need help

---

Send me an email dcrecycling@ymail.com

Quote:

---

Originally Posted by brick82

I have about 100 lbs of computer broads I want to sell but need help

---

I did not know they were gender specific....blondes,brunettes or redheads?

I'll take the redheads, just don't tell my wife! She wouldn't be happy with me bringing such in the house. :lol:

I think BC has been into my cooler...:p

Sirscrapalot - Life is really simple, but we insist on making it complicated. - Confucius

My wife is a brunette by changes to a light blonde with the sun a swimming pool so i get the best of both worlds...lol...now only if she would wear the red wig once in a while i'd be all seto:)

I think BC has been into my cooler...

Full article at Scrap Metal Forum: http://www.scrapmetalforum.com/scrap...#ixzz2XvVedlFd


Is it Friday already?

It's Friday somewhere BC, just like it's 5:00 somewhere bud. :p

Sirscrapalot - *POP*

Just wanted to chime in and tell everyone.....(Ebay style)..... Smooth transaction, GREAT COMMUNICATION!, Prompt Payment.
and
Denis, if no one has told you today they appreciated you; Well, I appreciate you!

Keep up the great work!

What is your current price for mother board

Email me

how long did it take you to collect this much weight of computer parts? Months? $30K is more than I made last year.

Quote:

---

Originally Posted by twoonesicks

Greets!

Just got back from seeing Denis over the weekend of December 1st. I brought him (about) 1600 pounds of memory, 400 pounds of hard drive boards, as well as all of my slot chips and rambus.

He was very quick with his e-mails. We were e-mailing each other from noon til 10 that night. Very responsive and detail oriented.

Drive was nice, very mountainous if you're coming from the West. I was driving from Cleveland. Also 4 tunnels if you take the turnpike....just a warning.

The payment came to over $30,000.

It went as smooth as it could have. I drove it all there in my truck, and got the chance to meet and shake hands with Denis. Real friendly guy, real simple stuff. Everything is cut and dry. Pulled my truck into his heated shop, unloaded everything with a tow motor. Weighed everything in front of each other, agreed on weights and that was that. No smoke and mirrors here.

http://i.imgur.com/hwnBV.jpg

He drove me to the bank in his vehicle, where I got the chance to meet his bank manager. Everyone was extremely friendly, and seemed to know Denis personally. He handed me over the signed certified check, we shook hands and I left. Real quick in and out. Check cleared in 7 days. Half of it cleared in 3.

Thanks again Denis,

Josh

Edit: OKAY --- My Fiance has a huge issue with what I posted for Denis' review. She does not think that the drive was that bad. I ... hate driving when the cliff to the left looks like my imminent death. I, on the other hand, was literally ****ting myself the whole time. /sarcasm off I feel like a real wuss towards anyone who lives by the rockies by the way.

---

On Tuesday I mailed a package of material to Denis. He received it today and I just now received my payment. A great transaction and great person to do business with. I'm already working on the next box.

whats the current prices. and is it per pound

Quote:

---

Originally Posted by jars

whats the current prices. and is it per pound

---

This is from pagr #1,

Quote:

---

Call/text or email for up to date pricing

---

Sent two large flat rates to Denis on Monday. Delivered on Wednesday and invoiced last night. Another smooth transaction with a great buyer thanks Denis. Getting some more ready and may take a road trip down the next time.

And yet another great transaction with Denis! Time to start putting together another box. Thanks, Denis!!

Another transaction completed and check on the way. Thanks Denis.