Tantalum capacitor scrap

**TantalumRecycling** · 12-04-2013, 12:32 PM

We purchase all types of Tantalum Capacitors Scrap

Current Pricing is:

Epoxy/Ceramic Capacitors - $11/Lb
SMD/Molded Capacitors -- $11/Lb
Axial/Hermetic A Size Capacitor - $7/Lb
Axial/Hermetic B Size Capacitor - $8.00/Lb
Axial/Hermetic Capacitors C&D - $10/Lb
Tantalum RED Capacitors - $30/Lb
Wet Tantalum Capacitors - $42.50/Lb
Ag/Ta Capacitors - $55/Lb
RED Top Ag/Ta Capacitors - $20/Lb
Tantapak/Wets Capacitors - $6/Lb
Tantalum Foil -- $6/Lb
Tantalum Bullets -- $6.50/Lb

We purchase all quantities small and large

Tantalum Recycling
2101 NW 93rd Avenue
Doral, Florida 33172 USA
T: 1.800.805.9150
E: info@tantalumrecycling.com
W: Tantalum Scrap Metal Recycling | Tantalum Recycling

More Information & Photos about our Company: https://www.facebook.com/tantalumscrap/

**TantalumRecycling** · 09-28-2016, 12:01 PM

Originally Posted by RLS0812

Could someone post some pictures of what the "long" caps ( with several solder points ) look like?

Can you please advise what you mean by Long Caps?

**eesakiwi** · 09-29-2016, 04:42 AM

Originally Posted by TantalumRecycling

Can you please advise what you mean by Long Caps?

These things? I have always wondered about them, figured they were 'Resistor arrays', maybe not...

**TantalumRecycling** · 09-29-2016, 09:02 AM

Originally Posted by eesakiwi

These things? I have always wondered about them, figured they were 'Resistor arrays', maybe not...

These are NOT Tantalum Capacitors.

**mikeinreco** · 10-15-2016, 12:05 AM

**mikeinreco** · 10-15-2016, 12:05 AM

Are these above tantulum.......This is one nut I have yet to crack but hopefully these are

**mikeinreco** · 10-15-2016, 11:05 PM

bump does anyone know?......If they are not I'll just toss them in shred I guess

**jimicrk** · 10-16-2016, 01:05 AM

I say yes but I would hang on to them until Tantalum Recycling responds.

**Breakage** · 10-16-2016, 10:34 AM

I would also like to know. I have some, too. My Spragues are differently colored but are the same shape and marked with a "+." I've noticed they squish a little bit in the pliers so I wasn't sure.

**ScrappinRed** · 10-16-2016, 01:26 PM

If they squish with pliers, no. But Mike's look right, they have the little solder blobs on each end...

**mikeinreco** · 10-16-2016, 04:24 PM

I guess its the weekend.......Perhaps someone who actually buys these will chime in.....LOL

**CTscrapman** · 10-16-2016, 06:15 PM

Hey Mike give them the old magnet test . One side should be magnetic and the other side will not be. Thats what I do when I get into that situation with the questionable ones. Been right every time lol

**mikeinreco** · 10-16-2016, 08:51 PM

well they seem to be lightly magnetic on one side and not at all on the other so I'm guessing yes.......Which pay grade are these?

**bigburtchino** · 10-16-2016, 10:50 PM

Mike - I would say you have tantalum solid electrolyte capacitors. 152D "Tantalex" type made by Sprague (now Vishay). These come in four case sizes (A, B, R, S,). With the following dimensions:
A - diameter 0.135, length 0.286
B - diameter 0.185, length 0.474
R - diameter 0.289, length 0.686
S - diameter 0.351, length 0.786
Dimensions are in inches and length is for case only (don't measure leads). Should be abel to measure to verify, hope this helps.

**Resalehound** · 10-17-2016, 03:10 PM

Do you buy the big capacitors from microwaves?

**jimicrk** · 10-17-2016, 05:50 PM

Originally Posted by Resalehound

Do you buy the big capacitors from microwaves?

He buys tantalum capacitors.

**hobo finds** · 10-17-2016, 06:09 PM

Even with the pics I still find it confusing on what to remove... I want to do this as well

**Breakage** · 10-17-2016, 09:30 PM

As long as we are ID'ing things, here are my little weirdos. The little red one seems to be obvious (magnetic, plus signs, 16v markings) but the others are less clear.

The yellow one has a "+" but is non-magnetic. Markings: WHITD/20VDC/HK7319

The sky blue one has several plus signs on the magnetic lead end but does pinch in the pliers. Markings: RICHEY/15V/52-7335

The dark blue one is hard to read but there are plus signs. Markings: 63V/016

The big silver one has a few plus signs and no magnetic end. Markings: M235/20v/7331A

The little silver one at the top may not even be a cap. It's the smallest of these things from this particular teardown. However, the others are as big as the dark blue cap shown so it seemed unlikely that it was a diode. Markings: 2,8n H

I apologize if this is not interesting to anyone on this thread. I had thought, at first, to just PM this to the buyer. But since so many posts seem to indicate ongoing uncertainty about what is or isn't tantalum, I decided to just put it out there for everyone's reference.

**TantalumRecycling** · 10-20-2016, 04:11 PM

Originally Posted by mikeinreco

YES< These are Tantalum Hermetic Capacitors.

**TantalumRecycling** · 10-20-2016, 04:12 PM

Originally Posted by breakage

as long as we are id'ing things, here are my little weirdos. The little red one seems to be obvious (magnetic, plus signs, 16v markings) but the others are less clear.

The yellow one has a "+" but is non-magnetic. Markings: Whitd/20vdc/hk7319

the sky blue one has several plus signs on the magnetic lead end but does pinch in the pliers. Markings: Richey/15v/52-7335

the dark blue one is hard to read but there are plus signs. Markings: 63v/016

the big silver one has a few plus signs and no magnetic end. Markings: M235/20v/7331a

the little silver one at the top may not even be a cap. It's the smallest of these things from this particular teardown. However, the others are as big as the dark blue cap shown so it seemed unlikely that it was a diode. Markings: 2,8n h

i apologize if this is not interesting to anyone on this thread. I had thought, at first, to just pm this to the buyer. But since so many posts seem to indicate ongoing uncertainty about what is or isn't tantalum, i decided to just put it out there for everyone's reference.

only the below burgandy capacitor is an epoxy tantalum capacitor!

**TantalumRecycling** · 10-20-2016, 04:14 PM

Originally Posted by jimicrk

I say yes but I would hang on to them until Tantalum Recycling responds.

YES Thank you!

SMF Buyer Finder - Click an item below to find a Scrap Metal Forum buyer that buys what you're selling.

Tantalum capacitor scrap - Page 16

Thread Tools

Search Thread

Display

Tantalum capacitor scrap

The Following 49 Users say Thank You for This Post by TantalumRecycling:

The Following 4 Users say Thank You for This Post by TantalumRecycling:

The Following 3 Users say Thank You for This Post by mikeinreco:

The Following 2 Users say Thank You for This Post by mikeinreco:

The Following 2 Users say Thank You for This Post by jimicrk:

Tantalum capacitor scrap

The Following 2 Users say Thank You for This Post by ScrappinRed:

The Following 2 Users say Thank You for This Post by CTscrapman:

The Following 2 Users say Thank You for This Post by bigburtchino:

The Following User Says Thank You to jimicrk for This Post:

The Following User Says Thank You to Breakage for This Post:

The Following User Says Thank You to TantalumRecycling for This Post:

Thread Information

Users Browsing this Thread

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

The Scrap Metal Forum

SMF Recommended Links

SMF on Facebook and Twitter