$$$ Buying Electronic precious metal scrap! $$$ - Page 23

$$$ Buying Electronic precious metal scrap! $$$
[IF YOU PLAN ON LEAVING US A REVIEW PLEASE PLACE IT ON THIS THREAD. THE ADMIN HAS MADE IT CLEAR HE WILL DELETE ANY REVIEWS FOR CASHFORCOMPUTERSCRAP.COM THAT AREN'T ON THIS THREAD. Admin previously took the time to move them over here but it is now becoming a time consuming task... so IF YOU WANT TO LEAVE A REVIEW PLEASE LEAVE IT HERE. Thanks ]

R2/RIOS Processed!

Buying Electronic Precious Metal Scrap!
Cash for your Computer Scrap | Cash for Computer Scrap

PRICING EFFECTIVE (meaning current)
10/21/2024



ATTENTION: If interested in working with us, please allow us to send you a quote on shipping picked up at your door!
Effective Immediately:
Mail in program criteria:
1. Must have a lot value of $150 or more (if using our prepaid labels, the $150 is the total lot value before shipping deduction)
2. If lot value is less than $150, we request no more than 3 grades of material, pre sorted.

Pricing delivered to our dock (44139)
PRINTED CIRCUIT BOARDS
Please remove batteries and excess AL and Steel - Please remove mercury relays as well. Those will incur a charge if received.
PRICE/LB MATERIAL
$2.70 Motherboards Small Socket (All Colors - P4 and Newer)
$5.90 Motherboards Large Socket (All Colors - Slot, P3 and older)
$3.45 Mid Grade High - Finger Board Trimmed/Devalued, Peripheral Boards, Wireless Router Boards Low End
$1.80 Mid Grade – Mid grade boards that are less populated than mid grade high and/or contain and abundance of contamination and/or are newer with less intrinsic metal content.
$5.65 Finger Boards (Only need to remove OVERSIZED heatsinks, battery... metal bracket is OK)
$7.00 Dual Socket Server Boards - Large Socket
$4.35 Dual Socket Server Boards - Small Socket
$4.75 Telecom Low Grade
$7.00 Telecom Mid Grade
$5.90 CD/DVD Boards (please remove ribbon wire and brown board if attached)
$4.75+ Tape Drive Boards (Paid on sort)
$6.00 Laptop Motherboard Boards

HIGH VALUE PRINTED CIRCUIT BOARDS
PRICE/LB MATERIAL
$11.50 RAMBUS (Memory with METAL Enclosure, also Blank Memory and Memory with Gold Trim cut)
$14.00 Hard Drive Boards (Sorting fee of $.30 per lb. Hard Drive Boards paid on sort once removing Floppy, CD/DVD and Media Boards)
$14.00 Cell Phone Boards CLEAN (please remove excess Plastic, Steel, Screens, Aluminum and Battery)
$-.50/lb Memory Mixed (Sorting fee of $.50 per lb. Memory paid on sort at pricing below)
$28.50 Gold Memory
$12.50 Silver/Tin Memory
$50.00 Gold Fingers (Pricing is for quality cut trim. Little to no Green, otherwise deduction)
$22.50 Slot Processor

OTHER PRECIOUS METAL ITEMS
PRICE/LB MATERIAL
$1.50 Gold Connectors
$6.50 Older Cell Phones w/o battery and back cover removed
$3.50 Smart Phones w/o battery and back cover removed
$2.75 Any Cell Phone with back cover and/or battery
$9.50 IC Chips/Eproms

CPUs (Must be Sorted)
PRICE/LB MATERIAL
$205.00 Intel 386 and 486
$205.00 Motorola
$125.00 Pentium Pro Gold Caps
$85.00 Cyrix/IBM/VIA Gold Cap
$60.00 Pentium Ceramic
$60.00 AMD Ceramic Clean (without Al. Cap. Take $15 off for CPU with Lid)
$65.00 Black Fiber CPU
$23.00 Green/Brown Fiber without Heatsink
$11.00 Green Fiber with Heatsink - Pins
$7.75 Green Fiber with Heatsink - Pinless

COMPUTER/SERVER PARTS
PRICE/LB MATERIAL
$0.85 Hard Drives Complete
$0.60 Hard Drives Complete (Bent, Punched, Crushed - NOT Shredded)
$0.40 Hard Drives w/o Boards
$0.50 Power Supply w/ Wire
$0.40 Power Supply w/o Wire
$0.35 Mixed Floppy/CD/DVD Drives

OTHER ITEMS
PRICE/LB MATERIAL
$1.20 Laptops Complete
$0.90 Incomplete laptops (Must have Motherboard)
$0.45 AC Adapter w/ Wire
$0.30 AC Adapter w/o Wire
$0.85 Mixed Computer Wire
$0.40 Mixed Christmas/Holiday Wire
$1.20 Ribbon wire with ends (Must be PRESORTED from other wire)
$1.20 Cat5/6 with ends (Must be PRESORTED from other wire)
$0.00 Mixed Computer Plastic (NO METAL!)
$0.40 Clean Aluminum Heatsink
$1.10 Clean Cu/Al Heatsink (No fans, plastic or attachments)
$4.00 Silver Plated Brass (Holloware and the similar. No Industrial. Non Magnetic)
$0.00 15" & 17" LCD [per POUND] DESKTOP LCD MONITORS - with or without BASE - BASE - No screen bleeding, gouges, Cracks, Cut cables, water damage . Must be monitor, NOT just a panel
$0.50 19"+ LCD [per UNIT] DESKTOP LCD MONITOR - with or without BASE - No screen bleeding, gouges, Cracks, Cut cables, water damage . Must be monitor, NOT just a panel
-$.10/lb LCD Monitor Scrap (LCD monitors that fail testing are considered scrap and charged at $.10/lb)
$0.50 Laptop Screens [per UNIT] Must be in case, pass light test, be in tact, no bleeding, water damage or cracks. ... Cut wire/bad screen -$0.25/lb (CHARGE) - All Netbooks Screens are Scrap. Please do not send them unless you plan on paying the recycling fee.


BATTERIES (CAREFULLY READ!! CRITERIA BELOW)
PRICE/LB MATERIAL
$0.15 Li Ion Laptop Cell 18650 (NO Swollen Batteries. Exposed terminals MUST be taped)
$0.15 Li Ion Cell Phone Batteries (NO Swollen Batteries. Exposed terminals MUST be taped)
$0.15 Li Ion Polymer - Laptop, Tablet and Cell (NO Swollen Batteries. Exposed terminals MUST be taped) (No ECIG or Lithium Compound batteries!)
$0..30/lb NiMh
-$.15/lb SWOLLEN BATTERIES ARE A CHARGE ITEM
-$.40 CHARGE Terminal Tape Fee
-$.10/lb CHARGE NI CD (Dry Cell)

Prices are subject to change without notice.
Pricing is determined by date of RECEIPT of material unless otherwise noted.

Anything else, send us an email: info@CashForComputerScrap.com Thanks

Looks like prices went down again?

Also do you take fax machine and printer boards? Do they fall under telecommunication boards? And also again, do you accept phone jack plugs for gold content?

Hello,
We take printer boards, fax machine boards, etc - paid on sort.

Computer wire - power cables, video cables, ribbon wire with ends, lan cables, power supply wires, etc.
Only cable we DONT buy at that price is the plastic "ribbon" wire that is out of printers - there is virtually NO copper in there.

So, I sent my first load to Ewasted, the total weight was 2880.79lbs of a huge mixture of material.

I was worried at first about sending a large amount of escrap to someone, it takes a lot of trust and in today’s society scammers are prolific; sending them your material gives them power and virtually strips you of your ability to protest, fortunately Ewasted and his crew are awesome.

I chose Ewasted for two primary reasons. The first reason being that he has literally hundreds of positive reviews and I have not seen any negative reviews, no other company on or off the forum even came remotely close. The second reason was his quick, polite, and professional responses, both of these were huge factors. I was happy to see how quickly he responded and that even though I bombarded him with questions he was patient with me and never lost his cool, even when I was a little impatient and obnoxious. Quality communication is quintessential in my opinion, especially when dealing with newer sellers. In addition, I found Ewasted’s pricing to be the best I have seen.

He received my shipment right when he was going through and R2 audit while simultaneously losing power to hurricane Sandy. My shipment was completed rather quickly and certainly thoroughly. I was quite impressed with how they sorted, especially how they broke up the telecom boards into so many categories and paid so well for them. In addition to boards I sent heat sinks, hard-drives, wire, connectors, memory, different cpu’s, etc…. I was impressed with their meticulous sorting followed by their quality pricing.

I really appreciate their service and I look forward to doing more business with them in the future. I would strongly recommend them.


Thanks Ewasted!

Originally Posted by shendog

I'm sorting through, itemizing and weighing all my items for my benefit. However, if I wanted, could I just throw every board/drive/ram/etc into a big gaylord and let you guys sort it out? (not the cpu's)

I would at least try to seperate it by boxing or bagging up each item. The longer it takes for them to go thru the longer it takes to get paid. If you are itemizing and weighing yourself then why not try to have it prepared for them to do the same?

Originally Posted by andrew1990

Well I got my first boxful right now, just got to get it weighed in. Im not new to shipping, but when the box weighs in between 70 to 100lbs would be my guess, whats the cheapest way of sending it?

It seems as if you should try to keep each box under 70# to keep the shipping down. Go onto ewasteds site and you can get a prepaid fedex label from them and they take shipping cost out of your payment so you dont have to put anything out of pocket. Depending on what you are sending usps flat rate boxes might be a way to go.

I would pm ewasted and ask him to get you a quote. He will need a good weight and dementions. This is available at his web site if you haven't checked. I have sent in several boxes with him arranging a pick up by Fedex from my front porch. I found this to be cheaper than me taking the box to a Fedex place. I also have sent in a pallet load that he arranged the shipping which worked out very well. Mike.

Originally Posted by toula

I see y'all got the "track this package" button up and working. I like it.

Yes, very cool.

yes that is included.