$$$ Buying Electronic precious metal scrap! $$$ - Page 62

$$$ Buying Electronic precious metal scrap! $$$
[IF YOU PLAN ON LEAVING US A REVIEW PLEASE PLACE IT ON THIS THREAD. THE ADMIN HAS MADE IT CLEAR HE WILL DELETE ANY REVIEWS FOR CASHFORCOMPUTERSCRAP.COM THAT AREN'T ON THIS THREAD. Admin previously took the time to move them over here but it is now becoming a time consuming task... so IF YOU WANT TO LEAVE A REVIEW PLEASE LEAVE IT HERE. Thanks ]



R2/RIOS Processed!

Buying Electronic Precious Metal Scrap!
Cash for your Computer Scrap | Cash for Computer Scrap

PRICING EFFECTIVE (meaning current)
10/21/2024

ATTENTION: If interested in working with us, please allow us to send you a quote on shipping picked up at your door!
Effective Immediately:
Mail in program criteria:
1. Must have a lot value of $150 or more (if using our prepaid labels, the $150 is the total lot value before shipping deduction)
2. If lot value is less than $150, we request no more than 3 grades of material, pre sorted.

Pricing delivered to our dock (44139)
PRINTED CIRCUIT BOARDS
Please remove batteries and excess AL and Steel - Please remove mercury relays as well. Those will incur a charge if received.
PRICE/LB MATERIAL
$2.70 Motherboards Small Socket (All Colors - P4 and Newer)
$5.90 Motherboards Large Socket (All Colors - Slot, P3 and older)
$3.45 Mid Grade High - Finger Board Trimmed/Devalued, Peripheral Boards, Wireless Router Boards Low End
$1.80 Mid Grade – Mid grade boards that are less populated than mid grade high and/or contain and abundance of contamination and/or are newer with less intrinsic metal content.
$5.65 Finger Boards (Only need to remove OVERSIZED heatsinks, battery... metal bracket is OK)
$7.00 Dual Socket Server Boards - Large Socket
$4.35 Dual Socket Server Boards - Small Socket
$4.75 Telecom Low Grade
$7.00 Telecom Mid Grade
$5.90 CD/DVD Boards (please remove ribbon wire and brown board if attached)
$4.75+ Tape Drive Boards (Paid on sort)
$6.00 Laptop Motherboard Boards

HIGH VALUE PRINTED CIRCUIT BOARDS
PRICE/LB MATERIAL
$11.50 RAMBUS (Memory with METAL Enclosure, also Blank Memory and Memory with Gold Trim cut)
$14.00 Hard Drive Boards (Sorting fee of $.30 per lb. Hard Drive Boards paid on sort once removing Floppy, CD/DVD and Media Boards)
$14.00 Cell Phone Boards CLEAN (please remove excess Plastic, Steel, Screens, Aluminum and Battery)
$-.50/lb Memory Mixed (Sorting fee of $.50 per lb. Memory paid on sort at pricing below)
$28.50 Gold Memory
$12.50 Silver/Tin Memory
$50.00 Gold Fingers (Pricing is for quality cut trim. Little to no Green, otherwise deduction)
$22.50 Slot Processor

OTHER PRECIOUS METAL ITEMS
PRICE/LB MATERIAL
$1.50 Gold Connectors
$6.50 Older Cell Phones w/o battery and back cover removed
$3.50 Smart Phones w/o battery and back cover removed
$2.75 Any Cell Phone with back cover and/or battery
$9.50 IC Chips/Eproms

CPUs (Must be Sorted)
PRICE/LB MATERIAL
$205.00 Intel 386 and 486
$205.00 Motorola
$125.00 Pentium Pro Gold Caps
$85.00 Cyrix/IBM/VIA Gold Cap
$60.00 Pentium Ceramic
$60.00 AMD Ceramic Clean (without Al. Cap. Take $15 off for CPU with Lid)
$65.00 Black Fiber CPU
$23.00 Green/Brown Fiber without Heatsink
$11.00 Green Fiber with Heatsink - Pins
$7.75 Green Fiber with Heatsink - Pinless

COMPUTER/SERVER PARTS
PRICE/LB MATERIAL
$0.85 Hard Drives Complete
$0.60 Hard Drives Complete (Bent, Punched, Crushed - NOT Shredded)
$0.40 Hard Drives w/o Boards
$0.50 Power Supply w/ Wire
$0.40 Power Supply w/o Wire
$0.35 Mixed Floppy/CD/DVD Drives

OTHER ITEMS
PRICE/LB MATERIAL
$1.20 Laptops Complete
$0.90 Incomplete laptops (Must have Motherboard)
$0.45 AC Adapter w/ Wire
$0.30 AC Adapter w/o Wire
$0.85 Mixed Computer Wire
$0.40 Mixed Christmas/Holiday Wire
$1.20 Ribbon wire with ends (Must be PRESORTED from other wire)
$1.20 Cat5/6 with ends (Must be PRESORTED from other wire)
$0.00 Mixed Computer Plastic (NO METAL!)
$0.40 Clean Aluminum Heatsink
$1.10 Clean Cu/Al Heatsink (No fans, plastic or attachments)
$4.00 Silver Plated Brass (Holloware and the similar. No Industrial. Non Magnetic)
$0.00 15" & 17" LCD [per POUND] DESKTOP LCD MONITORS - with or without BASE - BASE - No screen bleeding, gouges, Cracks, Cut cables, water damage . Must be monitor, NOT just a panel
$0.50 19"+ LCD [per UNIT] DESKTOP LCD MONITOR - with or without BASE - No screen bleeding, gouges, Cracks, Cut cables, water damage . Must be monitor, NOT just a panel
-$.10/lb LCD Monitor Scrap (LCD monitors that fail testing are considered scrap and charged at $.10/lb)
$0.50 Laptop Screens [per UNIT] Must be in case, pass light test, be in tact, no bleeding, water damage or cracks. ... Cut wire/bad screen -$0.25/lb (CHARGE) - All Netbooks Screens are Scrap. Please do not send them unless you plan on paying the recycling fee.


BATTERIES (CAREFULLY READ!! CRITERIA BELOW)
PRICE/LB MATERIAL
$0.15 Li Ion Laptop Cell 18650 (NO Swollen Batteries. Exposed terminals MUST be taped)
$0.15 Li Ion Cell Phone Batteries (NO Swollen Batteries. Exposed terminals MUST be taped)
$0.15 Li Ion Polymer - Laptop, Tablet and Cell (NO Swollen Batteries. Exposed terminals MUST be taped) (No ECIG or Lithium Compound batteries!)
$0..30/lb NiMh
-$.15/lb SWOLLEN BATTERIES ARE A CHARGE ITEM
-$.40 CHARGE Terminal Tape Fee
-$.10/lb CHARGE NI CD (Dry Cell)

Prices are subject to change without notice.
Pricing is determined by date of RECEIPT of material unless otherwise noted.

Anything else, send us an email: info@CashForComputerScrap.com Thanks

Originally Posted by Scrappah

Thanks for the prompt hf. There was a bit of thread drift so i was going to bow out.

As i said in my intro i've been lurking / reading / studying here for months now. It's only within the last few days that i joined.There are a lot of buyers listed here and on the web. I've done a few deals with others and they worked out more or less okay.

Ewasted comes very well recommended and for good reason. It's a class act !

The customer service is very responsive.
The shipping arrangements that they can provide for you are the best that i've seen so far.
There's a rapid turnaround time.
He posts his buy prices and updates them on a regular basis. It's pretty up front.
The pay outs are prompt.

I contacted customer service with my concerns and this was their final determination.

Issue 1: Not credited for cd/dvd boards.

As those here explained they were lumped in with the large socket motherboards. It's not like they didn't credit me for them. As a newbie it's just confusing when they combine things like that.

Issue #2: The Eproms:

We talked about that. The mix of Eproms,proms,and IC's that i sent out in the first load was similar to the ones that i sent out on the second load. The payout per pound on the second load was less than 1/10th of what it was on the first.

Customer service determined that the sorter on the first load had overpaid for the material that i had sent in.

Issue #3: I felt that they were being too picky when they downgraded the gold fingers that i had sent in. I'm a finish carpenter. I'm used to working within tolerances of + or - 1/32". The cuts were good with little or no green showing except for one.

Customer service offered to look into it but i asked them not to. It was just a small thing. The difference between 100% and a downgrade to 65% only amounted to a few dollars because it was such a small amount of material. It was not worth spending a lot of time on.

Issue #4: Sorting of the processors. I can't remember if i raised that issue or not with them. I know i raised it here. It would be too easy to get bogged down in trying to figure out what the older oddball solder in main processors are and what they're worth. The total weight of all the processors came out right so they probably got lumped in with something else. Maybe the green fiber capless ?

It's a small thing. It's not worth fussing over.

Anyway .... this is the Ewasted customer review thread. This is the review of my experience so far:

There were a few problems related to sorting and human error. ( It's not a perfect world.)

Overall, i would recommend Ewasted as one of the best buyers out there to deal with.

Hello
Thanks for giving us the opportunity to do business.
As always we preach and practice transparency. Please don't ever hesitate to contact us for more information or inquiries.

Issue 1: The only way to effectively buy low quantities of material and high volume pricing is make it a simple process. By placing Cd/DVD boards in the same category which pays the same, we save a step.
Why don't we cover this up front? The grading can effectively change... and it is reviewed about every 4 to 6 months. There are several factors involved in what we generate for the refinery.

Issue #2: You were overpaid the first time around. This CAN happen. The initial report you compared this to was in April when we had someone else in that position that is no longer with the company, due to that exact issue. We have very minimal opportunity for human error, it happens.

Issue #3: None of us have a background in carpentry, only metals and recycling. It isnt just how close you cut it but the quality of the trim as well. The guys keep their eyes open for trim that may not have gold plating throughout each side.... sometimes there is little to no surface area that is covered. It is a toss up in most instances, but generally we grade them fairly... arguably not always in our favor because we have lost money refining that grade of material.

Issue #4: If you are just starting out, don't sweat the small things. If you have some misc. items, place them in a bag and place a note in there that says "unknowns" or "help". We are happy to provide some feedback. We just need to know you want it.



I strongly encourage you to ask more questions along the way. That is what our chat and email features are for. As always, we are here to help!

Originally Posted by Scrappah

I've shipped out a couple of loads. The first went very smoothly.

Ran into some problems with the second load. FedEx picked it up last Monday. On Friday i got e-mails saying that it had been received,processed, and paid out. The value recovered was less than expected so i logged in to view the report.

It [U]appears[U] that a fair amount of malware was loaded onto my pc when i opened the report. It was obvious so i shut everything down and cleaned out all of the nasties. It's pure speculation but my best guess would be that his system got hacked from outside and it exploited a weakness somewhere in my web browser.

Later ... i logged on with a hardened machine and didn't have any problems viewing the recovery report. It seems as though there were a couple of problem areas in the report:

Problem area 1: I sent in a package of CD/DVD boards that i didn't receive credit for.

Possible cause: Could be anything from human error to lost in transit.

Solution: In the future include a packing slip listing all of the items shipped.

Problem area 2: It gets a bit complicated with eproms,IC chips,old processors that aren't easily identifiable, and gold connectors. It's a judgement call on the part of the person taking the items in as to their value. It's a bit of a mystery as to what they're looking for and what the fair value of those items would be. There's potential for problems. If the person on the other end makes a bad call you could get burned. A bad call could just as easily end up hurting Mario's company if they over pay. Either way it's bad for everyone involved over the long run.

Solution: KISS it ! ( Keep it simple Sam)

Don't ship those items.

Just focus on shipping the things that are easily identified like main boards,memory,common processors, HDD boards, CD/DVD boards etc. Be mindful of your shipping costs per pound. If it costs 75 cents a pound to ship something but it only has a value of 20 cents a pound you're losing 55 cents a pound on that item.

Ship the higher value items and sell the lower value things at the local scrapyard when it makes sense to do so.

Bottom line: ewasted has an excellent reputation for customer satisfaction here. I'm impressed ...i'm trying to incorporate some of the things that i've learned from his example into my own business and step it up a notch.

This may just be a " One off " kinda thing. Mistakes get made and things go wrong sometimes. We don't know the whole situation.

It's better to focus on preventing problems and misunderstandings in the future.

Hello
We always appreciate feedback... the good, the bad and the ugly! It is of course, reality! We aren;t perfect so i do want to know when we make mistakes.
However I think you had jumped the gun on your posts. Many of these posts can be a misrepresentation of your final post on how we actually did.

I strongly encourage anyone who wants to leave feedback after a transaction to do so on a single post so the message is clear and concise so it is fair for everyone.

Thanks!

what I don't understand is how the individual said he received malware when opening the CFCS website??........I have never experienced this issue.........Oh well just thought this was odd

In my centuries of running a Computer Repair shop, I have found that many PC problems are like my Uncle Ernie. Uncle Ernie was just fine yesterday; today he is lying dead on the living room floor. Everything breaks sometimes. The PC was probably already on the brink of having an issue; it just happened when opening CFCs's report. Their site is very simple and the reports are straightforward, too. I'm not saying Scrappah didn't have a problem, I just think it was ready to happen anyway. Just my Humble Opinion.
Scrappah: Keep on Scrappin!
Mario: Thanks for your service to us here on SMF!

I don't want to run off topic but i did want to address your question.

( Maybe the admin could delete this later ?)

I have different computers for different jobs. I've got a nice older Dell with an 800 mhz front side bus that i use in my office for business. It works quite well for that particular purpose. It's running XP with a very good antivirus program and windows explorer as the browser. The antivirus software updates every hour or so.

I checked my e-mail and the notification came in from CFCS that the value recovered report was available. I followed the link provided and logged into my account there. When i opened the link to view the report my machine started opening windows to different websites.

It's not supposed to do that so i shut everything down and ran a full system scan including start up.It turned up quite a bit of malware. It's not a big deal ... more like swatting away an annoying horsefly ....but it eats up time. It ties your machine up for awhile and a simple task which should take less than a minute delays you for an hour or more. You end up getting bogged down sorting through a problem instead of getting things done.

XP is considered obsolete by Microsoft. The internet explorer browser is known for problems.

After i got the problems sorted out i logged in with a machine running windows 7 and Firefox as the browser. Had no trouble viewing the report this time.

That's about the long and the short of it. The more likely thing is that the trouble started when i tried to open the value recovered report.If i were troubleshooting and trying to track the cause that would be the logical place to start.

ETA: I'm pretty careful about maintaining my machines. Frequent cleanings with CCleaner, defrag w/ defraggler, wipe free space, regular antivirus updates, regular scans.

Those darn Dells are pretty well built. If you take care of them they will hold up for a long time.

PM Sent to Scrappah

Originally Posted by happyisthealero

Should I seperate older gold ram from the newer ones to mnake more money?

Also should I remove mylar wires from CD/DVD boards before I try to sell them?

Hello
Memory only needs to be sorted by type: Gold, Silver, Rambus, Blanks
Remove the mylar wire from CD/DVD boards.
Thanks!

Originally Posted by Scrappah

Issue #4: Sorting of the processors. I can't remember if i raised that issue or not with them. I know i raised it here. It would be too easy to get bogged down in trying to figure out what the older oddball solder in main processors are and what they're worth. The total weight of all the processors came out right so they probably got lumped in with something else. Maybe the green fiber capless ?

It's a small thing. It's not worth fussing over.

Anyway .... this is the Ewasted customer review thread. This is the review of my experience so far:

There were a few problems related to sorting and human error. ( It's not a perfect world.)

Overall, i would recommend Ewasted as one of the best buyers out there to deal with.

He has a pretty good listing of the chips so what I do is place each individual kind in envelopes and mark what they are ''x how many.'' Sometimes if I'm un sure I just mark it ''unknown'' and figure the sorters will figure it out.

One time i wasn't credited for hard drive boards but I never said anything so this time I made sure to separate every type of board into ziplock bags and marked them (bags) as well as the boards themselves. I also wrote down what I sent so I can compare the final tally to what I have on my list here at home. My mistake was probably thinking they knew what boards were what (HD vs, CD/DVD) but maybe they aren't that easily separated by eyeballing them.

Originally Posted by newattitude

He has a pretty good listing of the chips so what I do is place each individual kind in envelopes and mark what they are ''x how many.'' Sometimes if I'm un sure I just mark it ''unknown'' and figure the sorters will figure it out.

One time i wasn't credited for hard drive boards but I never said anything so this time I made sure to separate every type of board into ziplock bags and marked them (bags) as well as the boards themselves. I also wrote down what I sent so I can compare the final tally to what I have on my list here at home. My mistake was probably thinking they knew what boards were what (HD vs, CD/DVD) but maybe they aren't that easily separated by eyeballing them.

Hello
Thanks for the share!
Our guys should be catching this... it absolutely helps to separate it. Pulling small boards and components from the mix is time consuming and tough. It really makes the process overly challenging on the sorters and the rest of our team to respond to you in a accurate and timely manner.

There are plenty of threads and stickies in the electronics section here on SMF. There are some awesome breakdowns that people here put together with pictures to give new members as well old members a good starting point to get acquainted with ewaste.

Beyond these tools you are going to have to contact a buyer and maybe send a picture to see how they grade boards. Not every buyer will grade the same.

As far as sending material ask yourself how you would want to receive a box of ewaste from a customer.
Hundreds of different boards thrown into a box or a box with ten bags containing the different boards grouped together. The easier you make it for the buyer the faster and more accurately they can process and pay you.

They are regulators off of server boards. May go as finger cards may go as slot processors.