$$$ Buying Electronic precious metal scrap! $$$ - Page 8

$$$ Buying Electronic precious metal scrap! $$$
[IF YOU PLAN ON LEAVING US A REVIEW PLEASE PLACE IT ON THIS THREAD. THE ADMIN HAS MADE IT CLEAR HE WILL DELETE ANY REVIEWS FOR CASHFORCOMPUTERSCRAP.COM THAT AREN'T ON THIS THREAD. Admin previously took the time to move them over here but it is now becoming a time consuming task... so IF YOU WANT TO LEAVE A REVIEW PLEASE LEAVE IT HERE. Thanks ]

R2/RIOS Processed!

Buying Electronic Precious Metal Scrap!
Cash for your Computer Scrap | Cash for Computer Scrap

PRICING EFFECTIVE (meaning current)
10/21/2024

ATTENTION: If interested in working with us, please allow us to send you a quote on shipping picked up at your door!
Effective Immediately:
Mail in program criteria:
1. Must have a lot value of $150 or more (if using our prepaid labels, the $150 is the total lot value before shipping deduction)
2. If lot value is less than $150, we request no more than 3 grades of material, pre sorted.

Pricing delivered to our dock (44139)
PRINTED CIRCUIT BOARDS
Please remove batteries and excess AL and Steel - Please remove mercury relays as well. Those will incur a charge if received.
PRICE/LB MATERIAL
$2.70 Motherboards Small Socket (All Colors - P4 and Newer)
$5.90 Motherboards Large Socket (All Colors - Slot, P3 and older)
$3.45 Mid Grade High - Finger Board Trimmed/Devalued, Peripheral Boards, Wireless Router Boards Low End
$1.80 Mid Grade – Mid grade boards that are less populated than mid grade high and/or contain and abundance of contamination and/or are newer with less intrinsic metal content.
$5.65 Finger Boards (Only need to remove OVERSIZED heatsinks, battery... metal bracket is OK)
$7.00 Dual Socket Server Boards - Large Socket
$4.35 Dual Socket Server Boards - Small Socket
$4.75 Telecom Low Grade
$7.00 Telecom Mid Grade
$5.90 CD/DVD Boards (please remove ribbon wire and brown board if attached)
$4.75+ Tape Drive Boards (Paid on sort)
$6.00 Laptop Motherboard Boards

HIGH VALUE PRINTED CIRCUIT BOARDS
PRICE/LB MATERIAL
$11.50 RAMBUS (Memory with METAL Enclosure, also Blank Memory and Memory with Gold Trim cut)
$14.00 Hard Drive Boards (Sorting fee of $.30 per lb. Hard Drive Boards paid on sort once removing Floppy, CD/DVD and Media Boards)
$14.00 Cell Phone Boards CLEAN (please remove excess Plastic, Steel, Screens, Aluminum and Battery)
$-.50/lb Memory Mixed (Sorting fee of $.50 per lb. Memory paid on sort at pricing below)
$28.50 Gold Memory
$12.50 Silver/Tin Memory
$50.00 Gold Fingers (Pricing is for quality cut trim. Little to no Green, otherwise deduction)
$22.50 Slot Processor

OTHER PRECIOUS METAL ITEMS
PRICE/LB MATERIAL
$1.50 Gold Connectors
$6.50 Older Cell Phones w/o battery and back cover removed
$3.50 Smart Phones w/o battery and back cover removed
$2.75 Any Cell Phone with back cover and/or battery
$9.50 IC Chips/Eproms

CPUs (Must be Sorted)
PRICE/LB MATERIAL
$205.00 Intel 386 and 486
$205.00 Motorola
$125.00 Pentium Pro Gold Caps
$85.00 Cyrix/IBM/VIA Gold Cap
$60.00 Pentium Ceramic
$60.00 AMD Ceramic Clean (without Al. Cap. Take $15 off for CPU with Lid)
$65.00 Black Fiber CPU
$23.00 Green/Brown Fiber without Heatsink
$11.00 Green Fiber with Heatsink - Pins
$7.75 Green Fiber with Heatsink - Pinless

COMPUTER/SERVER PARTS
PRICE/LB MATERIAL
$0.85 Hard Drives Complete
$0.60 Hard Drives Complete (Bent, Punched, Crushed - NOT Shredded)
$0.40 Hard Drives w/o Boards
$0.50 Power Supply w/ Wire
$0.40 Power Supply w/o Wire
$0.35 Mixed Floppy/CD/DVD Drives



OTHER ITEMS
PRICE/LB MATERIAL
$1.20 Laptops Complete
$0.90 Incomplete laptops (Must have Motherboard)
$0.45 AC Adapter w/ Wire
$0.30 AC Adapter w/o Wire
$0.85 Mixed Computer Wire
$0.40 Mixed Christmas/Holiday Wire
$1.20 Ribbon wire with ends (Must be PRESORTED from other wire)
$1.20 Cat5/6 with ends (Must be PRESORTED from other wire)
$0.00 Mixed Computer Plastic (NO METAL!)
$0.40 Clean Aluminum Heatsink
$1.10 Clean Cu/Al Heatsink (No fans, plastic or attachments)
$4.00 Silver Plated Brass (Holloware and the similar. No Industrial. Non Magnetic)
$0.00 15" & 17" LCD [per POUND] DESKTOP LCD MONITORS - with or without BASE - BASE - No screen bleeding, gouges, Cracks, Cut cables, water damage . Must be monitor, NOT just a panel
$0.50 19"+ LCD [per UNIT] DESKTOP LCD MONITOR - with or without BASE - No screen bleeding, gouges, Cracks, Cut cables, water damage . Must be monitor, NOT just a panel
-$.10/lb LCD Monitor Scrap (LCD monitors that fail testing are considered scrap and charged at $.10/lb)
$0.50 Laptop Screens [per UNIT] Must be in case, pass light test, be in tact, no bleeding, water damage or cracks. ... Cut wire/bad screen -$0.25/lb (CHARGE) - All Netbooks Screens are Scrap. Please do not send them unless you plan on paying the recycling fee.


BATTERIES (CAREFULLY READ!! CRITERIA BELOW)
PRICE/LB MATERIAL
$0.15 Li Ion Laptop Cell 18650 (NO Swollen Batteries. Exposed terminals MUST be taped)
$0.15 Li Ion Cell Phone Batteries (NO Swollen Batteries. Exposed terminals MUST be taped)
$0.15 Li Ion Polymer - Laptop, Tablet and Cell (NO Swollen Batteries. Exposed terminals MUST be taped) (No ECIG or Lithium Compound batteries!)
$0..30/lb NiMh
-$.15/lb SWOLLEN BATTERIES ARE A CHARGE ITEM
-$.40 CHARGE Terminal Tape Fee
-$.10/lb CHARGE NI CD (Dry Cell)

Prices are subject to change without notice.
Pricing is determined by date of RECEIPT of material unless otherwise noted.

Anything else, send us an email: info@CashForComputerScrap.com Thanks

Just got done on a road trip to ewasted. 300+ lbs, check for 740.00. Not bad, quite happy. Showed up at the door promptly twenty mins to 8. Door was open at 8 and I was unloaded/ paid by 9ish and on the way to the lake for the day. Sad thing is I spent 500 in 2 days between going to the lake and kennywood in pittsburgh, Pa on the way home. But I needed the vacation and my 3 year old son, wife, and nephew enjoyed the trip.

Thanks Mario. Another "small" box is coming next week. Just bought more lol. Would highly recommend him.

Ps. Mario had no qualms when he opened the trunk and seen the mix., I had every available space in the trunk stuffed as well as the back seat, In fact I kinda wish I had a camera when Mario opened the trunk. The look on his face was priceless lol, like wow man, you stuffed that much in the trunk..lmao.

Not posting my total weights or nothing like that in case I got better pricing from Mario than others. I dont think he did anything special price wise, but just in case he did, not posting that info.

Highly recommended.

Sent private message

I don't speak for ewated but have done busines with him. If you send him good photo's he can give you accurate pricing. Also look at the sticky thread in the break down section.

http://www.scrapmetalforum.com/disma...ification.html

Even though you have a lot of experience there are good photo's and descriptions. I'm certain you will find the lowest grade boards are not worth shipping, one of them is brown boards found in old monitors and tv's.

Seriously consider using ewasted shipping label it is a cheaper price than you most likely can get. Mike.

Another great experience with my latest shipment. It was processed very quickly and accurately. I can not say enough about how much I appreciate ewasted effort to make it easy for me. I only wish I had more to send, Mike.

About a day.

Prices updated... Unfortunately not for the better due to market changes.
Additionally we finally had to give in to adding another category for motherboards. Since all other buyers had initiated the category, this material was dumped on us from all over the place. So necessary changes were made.
Any material received before or on 7/17/2012 will be paid from the previous price list. For any material already in transit, those materials will also be paid on the previous price list. Moving forward the new price list is effective until changes in the market. Thanks!

I am now a sad panda!

Yes sir... will work on posting some photos.

Sent my first load of e scrap to Ewasted last Thursday. I got the final number about an hour ago. They came in within a few dollars of what I expected. They also provided a lot of support. I had lots of questions and they answered them all. And they gave me a rate on shipping that was about half what my local shipper could do. I will continue to work with them whenever I can.
Thanks to all of you on this forum. There is more information in an user friendly format here than anywhere else I have found. Hope to be able to pass on anything that will help others in the future.
silverZ

Currently any non green motherboards, with the exception of P3 and older boards.

For steel on finger cards, is that referring to the bracket on them or only heatsink's, batteries, ect?

Finger card bracket is "ok" for now... please remove batteries and heatsinks though.