What yards do you use? I'm on south west side, I've only really used united scrap on Cicero and 16th
Experienced Scrapper
|
What yards do you use? I'm on south west side, I've only really used united scrap on Cicero and 16th
Thornton Scrapper
|
Shredder yard is Metro Recycling in Blue island on Western ave.
Non shredder yard is Big Daddy Scrap in Chicago heights, but most of my non ferrous goes here.
Experienced Scrapper
|
235 ca$ per ton for shred , 270$ ca$ per shred if i accumulate 5 tons or more
Metal Recycling Entrepreneur
|
Don't laugh to hard at me but the three yards in Denver I use for different reasons range from $70-$90 possibly $100 but I believe that was knot for turkey day weekend.
So yeah 4.5 cents a pound is our current high price for shred. All we get is shred in Denver. It's that or free your choice of course.
|
Just brought a couple of small loads to my yard. 700 lbs of Lt. Iron at $140.00/GT and 1160lbs of #1 prepared at $195.00/GT. Been pretty good around here for a bit, but down from the $220.00/GT it was at.
|
Scale prices in Albany today $176/gt for light iron, $250/gt for short steel (1 prep) and drums / rotors. Tier / dealer pricin even better.
Metal Recycling Entrepreneur
|
Prices in Philly Trenton area did not go up in January.
Light iron $7.75/hundred and prepared #1/cast iron $8.50/hundred.
Upstate Shredding needs to buy a yard here.
Experienced Scrapper
Today in Central NC 5.75/hundred
|
|
Best prices around!Originally Posted by jeb1212
|
I've got steel byproduct and have called a guy 3 TIMES to come and get it. Can't GIVE this stuff away apparently!
I'm so into scrapping.. When my Steel Toe Boots Wear out, I cut the Steel out of them and recycle the Toe!
|
Well, I had a few steel items on the trailer (I really don't gather too much steel because it takes up so much space) and I was going to look at a job. I was driving across the celery fields and I see a helicopter carrying a box on the end of a rope. They have a helicopter training area there (I guess), so I drove down the road to get a better look. Well, there is a curbco stove, and I think, "if I had more on the trailer..." I drive down to the end where the copter school is and there is another stove. So I turn around and get the trailer and pick up both stoves and head to the yard. Yard was stacked high. Had the steel and three motors, so I dumped the steel and took the motors over to the light scales. Should have dumped the motors with the steel....
Metal Recycling Entrepreneur
|
Holy Schmokies ... steel is more than motors? That's crazy.
Copper, brass, and Leather. 3 of my favorite things.
Thornton Scrapper
|
|
Shred steel up $10 a ton today, up to 175/ton. In Chicago Heights Illinois
Copper2 $2.52
Yellow Brass $1.60
Stainless .33
Dirty alum Rads .20
Last edited by greytruck; 03-03-2018 at 12:31 PM.
Metal Recycling Entrepreneur
|
|
$185 per gross ton today. Nice little jump from the last trip I made.
Thornton Scrapper
|
|
Shred up a bit to 180/ton. South side of Chicago
|
|
Decent run. Nothing special, just getting rid of some curbco accumulation.
Yeah, and steel was more than lite motors again today. Motors gonna go in the shred pile as well ballasts.
Last edited by t00nces2; 04-04-2018 at 03:01 PM.
|
$8 cwt for shred, $11 cwt for #1 prepared, $.72/lb for clean extruded, street prices. Can price is down though, weird.
Experienced Scrapper
|
Todays Prices in Bryan/College Station, TX:
Shred - $155/Ton ($130/Ton in Austin)
#2 Wire - $.65/LB
Aluminum Breakage - $.15/LB
Motors - $.15/LB
Compressors - $.105/LB
Stainless - $.45/LB
Clean Aluminum - $.44/LB
Made in China, Recycled in the Republic of Texas!
"When the mind fails, brute force prevails" - CTSSolutions
|
Sheet/ shred: Wisconsin $195 net ton or $9.75 per hundred or $.0975 per pound. My load was 7500#. My closest yard at $165 and my favorite (but farthest away) yard at $205. Unprepared at 215nt or 220nt. 3' at 235nt or 285nt.
Last edited by pappawheelie; 04-05-2018 at 10:23 AM.
|
sheet iron $135 net ton $.0675 lb.
unprepared $165 net ton $.0825 lb.
clean sheet iron $175 net ton $.0875 lb.
prepared $185 net ton $.0925 lb.
price up, but so is gas $2.539 a gallon....
Better than the dump!
-
shredThere are currently 23 users browsing this thread. (0 members and 23 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks