Results 1 to 12 of 12

Someone needs to be put in there place!!!!!

| Scrap Metal Questions and Answers
  1. #1
    scrappy187 started this thread.
    SMF Badges of Honor


    Member since
    Dec 2010
    Posts
    23
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Someone needs to be put in there place!!!!!

    so i've been scrapping appliances and the guy is only paying $100/ton. my truck is a 88 ext cab long box and i use a trailer, but some how i can't seem to make it past 200 a load and i confronted the yard owner his scale is not zeroed out before i get on there. He cames if he starts the day and one of his trucks goes on the scale he maxes it out and it may have 1500lbs reading on the scale after the truck is off and he says it can't be clear cause it misses his day up. I told him thats bs.

    Problem is his scale says my truck weights
    1) 5280lb first load with a trailer after being emptied
    2) 6000lb second load with no trailer after being emptied
    3) 6500lb third load with trailer after being emptied
    4) 7200lbs 4th load with trailer after being emptied

    i am pissed off and confronting him did not work. What would you do?
    next closest yard is 1 1/2hrs away and it took $40 gas 1 way and that was only 1550lbs in the truck



  2. #2
    Rich's Avatar
    SMF Badges of Honor


    Member since
    Oct 2010
    Location
    Royersford Pa
    Posts
    69
    Thanks
    46
    Thanked 10 Times in 7 Posts
    I'm thinking that there has to be a county department of weights and measures. I know they are the people that that make sure gas pumps are accurate and certify them. I would try there or the better business bureau.

  3. #3
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    $100/ton??? I assume for Light Iron. I don't know where you are, but LT Iron should be closer to $175/ton. I'd start looking for another yard or go to that one 1 1/2 hr away when I had a couple tons. Then call Weights and Measures (should be a State agency). Are you operating as a legit business (taxes etc)? Keep track of mileage and actual expenses and you'll recoup at tax time. Businesses tend to gain a healthy respect for Weights/Measures. That's why I don't technically buy by weight.
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  4. #4
    SMF Badges of Honor


    Member since
    Nov 2010
    Posts
    54
    Thanks
    0
    Thanked 13 Times in 9 Posts
    The guy is clearly ripping you off and playing with the scale weights! If he had any common sense, he would play with your heavy weight and not touch your empty weight.. this way your empty weight is always the same.. This guy is a moron and a theif!.. complain to some1 and keep your scale receipt

  5. #5
    Rusty Nuts's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Texas
    Posts
    86
    Thanks
    6
    Thanked 26 Times in 11 Posts
    That's fraud.
    I'd contact the state agency that handles weighs and measures.

    Plus he may owe you some more money.

  6. #6
    tjlock's Avatar
    SMF Badges of Honor



    Member since
    Sep 2010
    Location
    Central Illinois (Streator)
    Posts
    188
    Thanks
    9
    Thanked 37 Times in 20 Posts
    That is crazy. I would definitely call somebody. That is bogus and needs to be stopped. Not only could he be ripping you off, but everyone else that goes in to sell metal to him. The yard I go to has been very very consistent with the weights. Every time I hit the scale empty, I weight out at 4620 ( unless of course my helper is with me, then we weight out empty at 4810).

    There was only one time when the scales were off. My helper went in to collect the money on the way out and was looking over the receipt. We had a small load which I figured we wouldn't get much at all. Figured $30 due to the light bulkiness of the metal and we ended up with $60. I actually went back and told him that he made a mistake and he didn't wanna hear it.

    "Scales are messing up a bit today, that is what you earned". Honestly think maybe he was cutting us a break beings we had been in there about 30 times that week. Here and there, we make a bit more than we normally do.

  7. #7
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Southwestern Pa
    Posts
    338
    Thanks
    27
    Thanked 176 Times in 102 Posts
    Every time I hit the scale empty, I weight out at 4620 ( unless of course my helper is with me, then we weight out empty at 4810).

    And gasoline weighs about 6.15 lbs/gallon. So obviously, you're arriving with the exact same amount of gas every time. That's remarkable...

  8. #8
    SMF Badges of Honor


    Member since
    Nov 2010
    Posts
    54
    Thanks
    0
    Thanked 13 Times in 9 Posts
    If im not mistaken in NJ the scales must be calibrated 4 times a year.

  9. #9
    tjlock's Avatar
    SMF Badges of Honor



    Member since
    Sep 2010
    Location
    Central Illinois (Streator)
    Posts
    188
    Thanks
    9
    Thanked 37 Times in 20 Posts
    Hmm, LoL Ditchdigger, I never thought about the weight of the gas in the truck going and coming. Nice observation. I know I have shown up with various amounts in the tank. Whether full tank, almost empty tank, and everywhere in between.

  10. #10
    SMF Badges of Honor


    Member since
    Nov 2010
    Posts
    54
    Thanks
    0
    Thanked 13 Times in 9 Posts
    He has empty weights ranging from 5280-7200.. Soo its obvious fuel weight has nothing to do with it. He's getting ripped off!

  11. #11
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Southwestern Pa
    Posts
    338
    Thanks
    27
    Thanked 176 Times in 102 Posts
    Quote Originally Posted by BigIgg View Post
    He has empty weights ranging from 5280-7200.. Soo its obvious fuel weight has nothing to do with it. He's getting ripped off!
    Yeah. I was just pointing out that tjlock's confidence based on getting the same light weight on every trip was misplaced. He could be getting ripped off as well, although for not as much. Or like I said, it might just average out, although that's poor business practice. There's no way a truck weighs exactly the same every time it crosses the scale.

  12. #12
    Rusty Nuts's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Texas
    Posts
    86
    Thanks
    6
    Thanked 26 Times in 11 Posts
    Quote Originally Posted by Ditchdigger View Post
    Yeah. I was just pointing out that tjlock's confidence based on getting the same light weight on every trip was misplaced. He could be getting ripped off as well, although for not as much. Or like I said, it might just average out, although that's poor business practice. There's no way a truck weighs exactly the same every time it crosses the scale.
    3) 6500lb third load with trailer after being emptied

    4) 7200lbs 4th load with trailer after being emptied
    I read that as a 700 pound difference.
    That's not fuel
    That's not bad business practice

    That's fraud.
    I hope he goes to jail if he's doing that to people.


  13. Similar threads on the Scrap Metal Forum

    1. took my scooter out for a little put today
      By EcoSafe in forum Off Topic Discussions
      Replies: 11
      Last Post: 04-05-2012, 07:58 PM
    2. I've really got to get a winch put on my truck
      By newattitude in forum A Day in the Life of a Scrapper
      Replies: 1
      Last Post: 02-15-2012, 11:14 PM
    3. apoligy, didnt know were else to put it
      By teenscrapper in forum A Day in the Life of a Scrapper
      Replies: 23
      Last Post: 12-02-2011, 02:08 PM
    4. Put A Sign By The Dump!
      By Rusty Nuts in forum Scrap Metal Spots
      Replies: 23
      Last Post: 02-03-2011, 08:12 AM

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook