eScrap Component Identification

I am doing my best to research and learn what im looking at on a circuit board. Can anyone confirm for me if I have these pieces identified correctly? I generally remove the copper, aluminum, and tantalum caps and leave everything else on. I removed just for pics and identification

Can anyone tell me what the things in my "?" box are?


How do you tell the difference between tantalum caps and the plastic looking ceramic caps?








2 and 3 are both IC chips, right? Would you take any of these chips off the board?


Any and all help is appreciated!!!

http://www.scrapmetalforum.com/e-was...ification.html

All your answers are in the thread above.

I'll let someone comment about the board (I'd sell as is) but #5 the black item to the right is a stand-up transistor. # 12 is also called a crystal.
The 2 items (one on a heatsink) to the large pic are (I don't know right offhand) and the barrel thing right beside with the stripe is a diode. Maybe Miked can help here with the transistor looking thingies, I never had any dealings with those kind of parts when I was doing radio repair.
#10 also called pushbutton switches. (pssstt, break them open and see the lil pretty round gold disc). That's all I got for now, everything else you've got a handle on.

Nice pic's by the way

pull most (ie easy to pull off) copper bearing form any brown boards (like in your pic)....they will be worth more than the brown board, but don't take much time doing it. I personally PULL all tantalum as the downgrade has never been much if any and I get to sell for $25-40/lb....take awhile to get that much, but I just have a big container I put it all in along with the other tantalum and it adds up over time....once full it is about 8-10lbs....so nice extra payday.

2: bridge rectifier
5: 2 resistors and a transistor
7: electrolytic capacitor
On Low Grade boards:
Pull the transistors if they show metal (it's clad copper), transformers and aluminum

Number 5 is a power transister and the back should be Cu. The one on the heat sink and the one next to it is also a transistor or similar. Check the back of all of those I have addressed and see if they aren't Cu.

Like much of what all of us do the effort is only worth it if it is worth it to you. Mike

Today's Electronics Lesson:
Resistance is measured in Ohms (R)
Power is measured in Watts (P)
Current is measured in Amps. (I)
Voltage is measured in (yep!) Volts (E)
Ohm's Law: E = I x R
All these things are usually modified as follows:
.001 =Milli
.000001 = Micro
.000000001= Nano
.000000000001 = Pico
1,000 = 1K
1,000,000 = 1 Meg
Capacitance is measured in Farads
1uf = 1 microfarad
1pf = 1 picofarad

I thought #2 were voltage regulators(the ones i have have voltage marked on em some in dc, some in amps). Does 4 say relay on it or does it give a uf number(ie: .2uf). If it says relay on it it's a relay, if it says uf(unifarads) it's a block capacitor.

To clear up a couple of points, #2 is called a bridge rectifier (can take 120ac and change it to 12dc volts at whatever amps it is marked). Second point is if it's marked uf then that's the symbol for microfarad (I believe that's a millionth of a farad).