Page 1 of 2 12 LastLast
Results 1 to 20 of 29

microwave oven

| Scrap Metal Questions and Answers
  1. #1
    Scrapper2010 started this thread.
    SMF Badges of Honor


    Member since
    Sep 2010
    Location
    Columbus, Ohio
    Posts
    31
    Thanks
    0
    Thanked 3 Times in 3 Posts

    microwave oven

    Does anyone know if I can just take a microwave to be recycled, or is there something inside that I should remove first?


  2. #2
    SMF Badges of Honor

    Member since
    Aug 2010
    Posts
    7
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Re: microwave oven

    There is a motor in there...but not worth the time...or the mess of removing it.

    Be picky at your own risk

  3. #3
    tjlock's Avatar
    SMF Badges of Honor



    Member since
    Sep 2010
    Location
    Central Illinois (Streator)
    Posts
    188
    Thanks
    9
    Thanked 37 Times in 20 Posts

    Re: microwave oven

    Actually, depending on your scrap yard, they may refuse it if the microwave still has the radon plate in it. I had 2 one day and he said that they couldn't take them unless they were removed.

  4. #4
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts

    Re: microwave oven

    Try, though. I've taken microwaves to two different yards with no problems.
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  5. #5
    Scrapper2010 started this thread.
    SMF Badges of Honor


    Member since
    Sep 2010
    Location
    Columbus, Ohio
    Posts
    31
    Thanks
    0
    Thanked 3 Times in 3 Posts
    Just wanted to update, they took they microwave as is, no questions asked. Thanks for the help.

  6. #6
    tjlock's Avatar
    SMF Badges of Honor



    Member since
    Sep 2010
    Location
    Central Illinois (Streator)
    Posts
    188
    Thanks
    9
    Thanked 37 Times in 20 Posts
    That is a good deal, wish our scrap yard would take them as is.

  7. #7
    SMF Badges of Honor


    Member since
    Nov 2010
    Posts
    165
    Thanks
    23
    Thanked 69 Times in 36 Posts
    Near me, microwaves are taken without a problem. Inside each microwave is one giant transformer that can be sold for copper breakage or motor price. There is also a small amount of industrial grade wire. You may want to experiment with cutting these out and selling them. If you come across a large number of microwaves, it WILL be worth it!

    Also to keep in mind: every microwave has a magnetron. Magnetrons are the microwave generating devices inside of microwave ovens, and they are made of a copper core and have several magnets. There is a small market for used magnetrons, but they are sold on Ebay and possibly at repair shops near your scrap yard.

    they may refuse it if the microwave still has the radon plate in it. I had 2 one day and he said that they couldn't take them unless they were removed.
    There is no such thing as a radon plate. Radon is a noble gas. There is nothing like that in microwaves. I have no idea what your yard man was talking about.

  8. The Following User Says Thank You to TheMetalizer for This Post:


  9. #8
    Scrapper2010 started this thread.
    SMF Badges of Honor


    Member since
    Sep 2010
    Location
    Columbus, Ohio
    Posts
    31
    Thanks
    0
    Thanked 3 Times in 3 Posts
    Since then I've gotten five more microwaves. I've been taking the motors out of them. Just takes a few minutes, it's worth it for me.

  10. #9
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    I have done a post about Microwaves. Tells you almost (I'm always learning..) everything you need to know.

  11. #10
    bluemeate's Avatar
    SMF Badges of Honor


    Member since
    Jul 2011
    Posts
    489
    Thanks
    16
    Thanked 137 Times in 61 Posts
    also dont forget to throw a small oven burrito in there first to see if it still works for resale!

  12. #11
    SMF Badges of Honor


    Member since
    Jun 2011
    Posts
    55
    Thanks
    3
    Thanked 74 Times in 20 Posts
    The yard I go to will take them as long as the capacitor is taken out...


  13. #12
    newattitude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Hinckley Ohio, home of the buzzards
    Posts
    2,163
    Thanks
    1,431
    Thanked 2,497 Times in 904 Posts
    One of my yards is NADA about microwaves because of the magnetron. so I just break them down and turn them in at the other yard and so far they haven't said anything. I just dont' turn in the tube from the magnetron.

  14. #13
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,758
    Thanks
    6,037
    Thanked 5,910 Times in 2,556 Posts
    I remove the megatron and mix them in with my electric motors

  15. #14
    SMF Badges of Honor


    Member since
    Jul 2011
    Location
    Chrisman, IL
    Posts
    151
    Thanks
    13
    Thanked 26 Times in 22 Posts
    They only thing dangerous in the magnetron are the two pink ceramic pieces. They contain berylium oxide which is a carcinogen and more toxic than lead. So long as you don't smash 'em and breath it in you should be fine. I take it all apart and cut those ends off to get at that chunk of copper in between 'em.
    Eat. Sleep. Scrap.

  16. The Following User Says Thank You to zakmattingly for This Post:


  17. #15
    SMF Badges of Honor

    Member since
    Jul 2011
    Location
    Long Island
    Posts
    9
    Thanks
    6
    Thanked 0 Times in 0 Posts
    Wonderful .... Just smashed those two pink ceramic pieces on my first microwave today, at least it was outdoors.

  18. #16
    Dumpster-Dee's Avatar
    SMF Badges of Honor



    Member since
    Feb 2011
    Location
    SW Georgia
    Posts
    1,775
    Thanks
    2,286
    Thanked 838 Times in 457 Posts
    mj....please read through these threads and learn how to do things safely before you hurt yourself.

  19. #17
    newattitude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Hinckley Ohio, home of the buzzards
    Posts
    2,163
    Thanks
    1,431
    Thanked 2,497 Times in 904 Posts
    Omg, I never smashed one I didn't know they had anything in them but I'm too afraid to now what with zakmattingly said about the berylium in them. Do you cut below the pink ends? So the copper I'm assuming is in the fat middle part of the magnetraon then. I think I'm happy not breaking them!

  20. #18
    SMF Badges of Honor


    Member since
    Jul 2011
    Location
    Chrisman, IL
    Posts
    151
    Thanks
    13
    Thanked 26 Times in 22 Posts
    Quote Originally Posted by newattitude View Post
    Do you cut below the pink ends?
    I cut right up against the fat part just to keep a safe distance from it since I use a hacksaw. Don't wanna slip up. And yeah Dee, I busted my first one too. Just wouldn't make a habit of it. Thought about just putting a mask on and breaking it off but rather not risk it. Trying to find a safe way to dispose of 'em. I don't like putting 'em out with the trash. Been individually wrapping 'em in newspaper and puttin 'em in a plastic coffee container labeled "TOXIC" for now.
    Last edited by zakmattingly; 07-26-2011 at 10:55 AM.

  21. #19
    newattitude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Hinckley Ohio, home of the buzzards
    Posts
    2,163
    Thanks
    1,431
    Thanked 2,497 Times in 904 Posts
    Thanks Mechanic! is that link a part of this site? How do you access it from here I dont see a way.

  22. #20
    Dumpster-Dee's Avatar
    SMF Badges of Honor



    Member since
    Feb 2011
    Location
    SW Georgia
    Posts
    1,775
    Thanks
    2,286
    Thanked 838 Times in 457 Posts
    did you try clicking on the address ? that worked for me, attitude.


  23. Similar threads on the Scrap Metal Forum

    1. Electric Oven with Microwave Built In on Top - Should I?
      By BigRyan in forum Scrap Metal Questions and Answers
      Replies: 4
      Last Post: 10-14-2013, 12:26 AM
    2. Electric oven burners
      By wayne1956 in forum Scrap Metal Questions and Answers
      Replies: 12
      Last Post: 06-02-2012, 01:35 AM
    3. Goldstar microwave oven model ER-711M
      By imyourgirl in forum A Day in the Life of a Scrapper
      Replies: 9
      Last Post: 01-21-2012, 09:52 AM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook