Page 1 of 2 12 LastLast
Results 1 to 20 of 31

New scrapper, couple questions!

| Scrap Metal Questions and Answers
  1. #1
    BubbasGarage started this thread.
    SMF Badges of Honor


    Member since
    Dec 2011
    Posts
    21
    Thanks
    0
    Thanked 2 Times in 2 Posts

    New scrapper, couple questions!

    Hello everybody, just joined the site and will now be looking for answers. But while i am looking i might as well ask some questions!

    First of all i am going to start scrapping vehicles. ( i am however not new to vehicles)
    Things my local scrap yard require.
    Remove all fluids such as, oil, antifreeze, transmission fluid ect...
    Remove gas tanks

    These are the things i will be removing and scrapping separately.
    Batteries
    Catalytic Converters
    Alternators
    Starters
    Aluminum Rims
    I will also be removing the tires to make it more prepared.

    So Basically here are my main questions.
    Is there anything else i should take off to scrap separately?
    Is there copper anywhere else i can remove?
    If it has aluminum intake/heads, is it worth it to remove them?
    What else can i take off my vehicle to increase its value (more prepared)
    Should i sell my alternators as is, or take the copper out of them?
    What is actually in my starter? Any copper? Or sell that as a motor?

    Basically any tips for getting the most out of scrapping a car would be awesome!
    Thanks so much!
    Jordan

  2. The Following User Says Thank You to BubbasGarage for This Post:



  3. #2
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    This thread had been CLOSED for some unknown reason. I have opened it for replies/comments.
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  4. #3
    Scrap man's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    NY
    Posts
    657
    Thanks
    36
    Thanked 172 Times in 93 Posts
    The radiator is easily removable, there's some wiring in there, and good parts are worth a lot more than scrap.

    The alternator is usually worth it to take apart, but that's up to you. Same with the starters.
    Last edited by Scrap man; 12-06-2011 at 09:26 PM.
    There's nothing more fun and more effective than hitting something repeatedly with a sledgehammer

  5. #4
    injunjoe's Avatar
    SMF Badges of Honor



    Member since
    Jan 2011
    Location
    Central, FL
    Posts
    1,309
    Thanks
    1,249
    Thanked 1,194 Times in 594 Posts
    Welcome to the forum Jordan, Albeit I am not a car scrapper it sounds like you have the basic idea down pat.

    For your questions,
    Every hunk of copper you pull off or out of the car will improve you profit margin.
    You must ask yourself if the time and effort is worth the extra money or is it better to just move the product and let the next guy in the chain spend the labor and reap the results.
    When the white man discovered this country Indians were running it
    no taxes, no debt, women did all the work.
    White man thought he could improve on a system like this. - Old Cherokee saying

    I did not surrender, they took my horse and made him surrender. - Lone Watie

  6. #5
    BubbasGarage started this thread.
    SMF Badges of Honor


    Member since
    Dec 2011
    Posts
    21
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Thanks for the quick replies guys!

    What exactly can i scrap the radiator for? Is there something in it?
    Also, whats in the starter? Copper?
    Thanks again for the tips!

  7. #6
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    New Jersey
    Posts
    102
    Thanks
    53
    Thanked 30 Times in 18 Posts
    You may want to scan some car forums that are related to the vehicle you are scrapping. If you don't specialze you can easily pass up on valuable interior pieces that can be interchanged between models and years.

    For example, a set of sun visors from a 96+ VW Cabriolet will bring you $50 since they are the only ones offered in black and fit all 93-99 Mk3s. A black 93+ VW Corrado dome light W/sunroof switch can bring in over $100 for the same reason.

  8. #7
    BubbasGarage started this thread.
    SMF Badges of Honor


    Member since
    Dec 2011
    Posts
    21
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Scrap lap. Thank you for the responce. I know exactly what your saying.. only problem with that is that i do not use ebay, and live in a smallish town, so not a big group looking for parts... but if its a common vehicle. i shall do that! Thanks!

  9. #8
    injunjoe's Avatar
    SMF Badges of Honor



    Member since
    Jan 2011
    Location
    Central, FL
    Posts
    1,309
    Thanks
    1,249
    Thanked 1,194 Times in 594 Posts
    Quote Originally Posted by BubbasGarage View Post
    Thanks for the quick replies guys!

    What exactly can i scrap the radiator for? Is there something in it?
    Also, whats in the starter? Copper?
    Thanks again for the tips!
    Bubba can I ask how this thread was closed the first time?

    You seem to want to sound experienced yet ask very basic questions, perhaps you should post an introduction in the intro section so folks can get a handle on who you are first then more people will be apt to answer and help you.

    Yes the starter is wound with copper and radiators are most often made of copper core..........

  10. The Following User Says Thank You to injunjoe for This Post:


  11. #9
    SMF Badges of Honor


    Member since
    May 2011
    Location
    Dallas TX
    Posts
    1,979
    Thanks
    158
    Thanked 1,182 Times in 518 Posts
    Quote Originally Posted by BubbasGarage View Post
    ..only problem with that is that i do not use ebay, and live in a smallish town.........
    Sorry to say but you are deadly wrong. Just because you live in a small town does not mean you can not do Ebay in more than one way.

    #1 Do it your self. From me reading your post....you do not want to deal with and or you do not have the know how.

    #2 find someone else who will buy it and sell it on EBay....you should find someone in your town (even a very small town) that will have some kind of resell shop. The power of EBay has put the "power" into small shops as well as large...so a one man army kind of person can do ALOT.

    #3 find a "company" again this can be a one man army kind of deal once again but they wont buy the item but take it and sell it and pay you a % cut deal that you and them work out.

    Great things about option 2 and 3, they spend all the time and work on selling it...you make a small amount but more than scrap. The item is reused (better than being scraped if you ask me) and HELP bring money INTO your town that will be spent in YOUR town.

    Just my two cents.

    My company name was Easy Recycle but has since been closed
    My Name Stephan Harz
    My YouTube page

  12. #10
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    New Jersey
    Posts
    102
    Thanks
    53
    Thanked 30 Times in 18 Posts
    Quote Originally Posted by BubbasGarage View Post
    Scrap lap. Thank you for the responce. I know exactly what your saying.. only problem with that is that i do not use ebay, and live in a smallish town, so not a big group looking for parts... but if its a common vehicle. i shall do that! Thanks!
    Best bet is selling on the classified section of specific car forums. I can put a set of mint visors on eBay for $45 shipped and they just sit, but I can sell the same ones for $60 in the classifieds of the vw forum I frequent.

    A tip for you car dismantlers, hop on any 99+ VW Cabriolet you find. They are like gold. If you get one LMK and I'll run you off a list of valuable stuff.

  13. The Following User Says Thank You to scrap lap for This Post:


  14. #11
    BubbasGarage started this thread.
    SMF Badges of Honor


    Member since
    Dec 2011
    Posts
    21
    Thanks
    0
    Thanked 2 Times in 2 Posts
    First, i have no clue why it was closed! He sent me a message saying it was unknown, but its all good now haha
    I have been dealing with vehicles for couple years now, buying, fixing selling, so i know my fair share. I never really cared what was inside my parts, starters and such, so i never really got into it, but now that im looking to get into scrapping i want to know to get some extra cash! I know there is often copper in radiators but arent they only in the older vehicles? And how do i get the copper out of them? :/ thanks again

  15. #12
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    Once you have a car to scrap, find out what parts on it are valuable.
    Things like carby & starter & alternator are valuable.
    But having a certain tailshaft might also be valuable, same with seats, or like above, sun visors.

    I asked if I could scrap out the wiring loom out of a car up a driveway, they were about to load it onto a trailer & take it away for scrap.
    While I was removing the loom (for copper, I strip it & burn it off, lotsa work, but $) I told them what I was doing.

    So the guy starts thinking & gets me to remove the starter, walks inside, stays there for a while, walks out, sez
    "I just sold the starter for $110, on 'TradeMe' (NZ craigslist, Much much better setout). Moneys already in my bank account.
    m They actually have a 'Wanted' section & the ad was in that.
    He based the price on a previously sold item & included postage so it was $8 cheaper in the end.
    Still, $100 for no work.....

    Leave the connections on parts if you can, just run past the connection & leave a inch or two of cable.

  16. The Following User Says Thank You to eesakiwi for This Post:


  17. #13
    BubbasGarage started this thread.
    SMF Badges of Honor


    Member since
    Dec 2011
    Posts
    21
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Easyrecycle. I did not mean that i can not use ebay, i just meant i do not use it. To much of a hassle for a couple extra bucks. Especially with my schedule. School, work, and when ever i dont work i will be working on gettin vehicles ready to scrap! I appreciate and understand your 2 cents

  18. #14
    SMF Badges of Honor


    Member since
    Nov 2011
    Location
    Ocala fl
    Posts
    100
    Thanks
    73
    Thanked 72 Times in 36 Posts
    Before scrapping certain parts check around. Here in my area there is a guy who buys starters alternators ac compressors cv axles and rack and pinions for better than scrap price.He sells them to a remanufacturer who rebuilds them and resells to parts stores
    Last edited by fordsix; 12-06-2011 at 11:17 PM. Reason: typo

  19. #15
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    Radiators, ****! Get a magnet.
    Radiators, to scrap them, you need to remove it, & rip off the top & bottom if they are plastic or iron (magnetic).
    Then you probably have to remove the steel strip down both sides of it, they peel off with a crowbar.

    Check it with a magnet, you don't want any iron on it at all.
    They buy it for a 'Radiator price' or as Copper/brass mix' NZ$4.31 Kg, say ~US$3 per Lb?

    Rip out the heater core as well as its the same thing, just smaller.
    Aircon cores Ali.

  20. #16
    BubbasGarage started this thread.
    SMF Badges of Honor


    Member since
    Dec 2011
    Posts
    21
    Thanks
    0
    Thanked 2 Times in 2 Posts
    eesakiwi- Didnt know it was that easy! Never had to mess with a radiators before! Thanks much!

  21. #17
    SMF Badges of Honor


    Member since
    May 2011
    Location
    Dallas TX
    Posts
    1,979
    Thanks
    158
    Thanked 1,182 Times in 518 Posts
    Quote Originally Posted by BubbasGarage View Post
    Easyrecycle. I did not mean that i can not use ebay, i just meant i do not use it. To much of a hassle for a couple extra bucks. Especially with my schedule. School, work, and when ever i dont work i will be working on gettin vehicles ready to scrap! I appreciate and understand your 2 cents
    There very well could be someone from your town that will do all of that for you and pay you. Make a listing in CL and ask around.

  22. #18
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    fixing them and scrapping them is two different worlds. ive done both, and as to scrapping them you are a noob. read study and learn, then you will know what questions to ask and they will be answered. good luck.

  23. The Following User Says Thank You to EcoSafe for This Post:


  24. #19
    BubbasGarage started this thread.
    SMF Badges of Honor


    Member since
    Dec 2011
    Posts
    21
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Yes olddude. Agree 100% Just saying that im not new to vehicles!

  25. #20
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    Quote Originally Posted by BubbasGarage View Post
    Easyrecycle. I did not mean that i can not use ebay, i just meant i do not use it. To much of a hassle for a couple extra bucks. Especially with my schedule. School, work, and when ever i dont work i will be working on gettin vehicles ready to scrap! I appreciate and understand your 2 cents
    To much of a hassle for a couple extra bucks? I dont get this at all. Why not make every penny you can from what ever you are scrapping? I just sold on ebay a hard drive from a computer I scrapped out for $25. Instead of getting $1 in scrap value I got about $18 for it after fees and shipping. Im sure you can do the same with certian car parts. Why would you sell the alternator to the scrap yard for say 5 bucks in scrap if you can sell it on ebay for $50. Just dont get it.

    And welcome to the forum read up.

  26. The Following 2 Users say Thank You for This Post by PartTimeScrapper:



  27. Similar threads on the Scrap Metal Forum

    1. A couple of quick e-waste breakdown questions
      By waredu in forum Dismantling, Breaking Down & Maximizing Scrap
      Replies: 11
      Last Post: 04-10-2012, 01:04 PM
    2. Just a couple of questions
      By Julie in forum Scrap Metal Questions and Answers
      Replies: 18
      Last Post: 03-09-2012, 03:29 AM
    3. couple questions. scored my first "big" job
      By vamped400 in forum Scrap Metal Questions and Answers
      Replies: 5
      Last Post: 04-27-2011, 05:43 AM
    4. Total noob, couple questions
      By njhardcore1 in forum Scrap Metal Questions and Answers
      Replies: 14
      Last Post: 04-25-2011, 01:13 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook