Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Does anyone use Freecycle.org?

| Scrap Metal Spots
  1. #1
    Ace started this thread.
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Indiana
    Posts
    273
    Thanks
    177
    Thanked 154 Times in 87 Posts

    Does anyone use Freecycle.org?

    http://www.freecycle.org/

    I have belong to my local freecycle group for awhile, but haven't really paid much attention to it. Was wondering if anyone uses this to drum up items to scrap. I just responded to items really close to my work that I can scrap out, and it's FREE.


  2. #2
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    I did for awhile. Did find any use for it.
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  3. #3
    708bigbuck's Avatar
    SMF Badges of Honor


    Member since
    Aug 2010
    Posts
    53
    Thanks
    0
    Thanked 26 Times in 14 Posts
    I've used it for about 6 months. I've given away a couple things but have never gotten anything.

  4. #4
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    Kansas City
    Posts
    8
    Thanks
    0
    Thanked 1 Time in 1 Post
    I use it but don't get much. Got a dryer last week the best part of that was the 6.00 in change I got out of it. The 20 years of candy wrappers, pencils, crayons, and other nasty stuff I pulled out of it was not so cool.
    " Where others see trash I see cash "

  5. #5
    wayne1956's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Cleburne, TX
    Posts
    705
    Thanks
    195
    Thanked 754 Times in 293 Posts
    I receive the posts and have gotten a couple of appliances, but have not received a whole lot. Most of the time when I see an appliance posted and reply, the poster says it is awaiting pick up, so a lot of scrappers do use it.

  6. #6
    CodyT's Avatar
    SMF Badges of Honor


    Member since
    Dec 2010
    Posts
    15
    Thanks
    1
    Thanked 6 Times in 2 Posts
    After you posted this i had never heard of freecycle.org so i checked it out first post was 300-400lbs of scrap from a furnace replacement so i emailed the guy and he said come out and grab it and he would help me load my trailer so i got out there and it happened to be about 15 minutes from my house but it was only 5 minutes from the scrap yard i go to so i got there and we loaded it up and i hit the scrap yard on the way back it ended up being almost 600lbs and $60 so thanks for that tip.

  7. The Following User Says Thank You to CodyT for This Post:


  8. #7
    marc.ferrier@yahoo.com's Avatar
    SMF Badges of Honor

    Member since
    Jan 2011
    Location
    Philadelphia
    Posts
    9
    Thanks
    7
    Thanked 2 Times in 2 Posts
    Sounds like I might give it a shot !

  9. #8
    Scrap man's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    NY
    Posts
    657
    Thanks
    36
    Thanked 172 Times in 93 Posts
    I was thinking that you could also use freecycle to get rid of stuff from a cleanout if you do cleanouts. If you're gonna pay money to dump the stuff, you might as well get rid of everything you can for free. It's not just good for getting stuff...

    There's nothing more fun and more effective than hitting something repeatedly with a sledgehammer

  10. #9
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    I just joined. I have not asked for anything yet. I am offering acouple things to get the community used to me. I will start asking for stuff next week maybe.

  11. #10
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    OK, I just asked this morning for computers. Working or not. I have one reply with a guy nthat says he has a CPU. I told him I will take it. I hope there are more replies tomorrow.

  12. #11
    rca987's Avatar
    SMF Badges of Honor

    Member since
    Jan 2011
    Location
    Texas
    Posts
    938
    Thanks
    46
    Thanked 385 Times in 223 Posts
    Fairly older topic, but I have been using Freecycle since I heard about it, and have gotten quite a few things from computers, boxes of misc. wires, lawnmowers etc..

    Of course I put up offers for plastic things or some clothings I find that has no scrap value so I don't appear to be only a "taker"
    Garbage keyboards > spɹɐoqʎǝʞ ʎɐqǝ

  13. #12
    wayne1956's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Cleburne, TX
    Posts
    705
    Thanks
    195
    Thanked 754 Times in 293 Posts
    I have received a couple of appliances from folks posting them, but I have yet to get one from my post asking for them. I do much better with craigslist.

  14. #13
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    After being on freecycle for a few months now, i have decided to use it for things other than scrap. I have given away some things that people could use, and have taken a washer and drier that were announced as scrap and economically unrepairable. Otherwise I am crossing my fingers that those other washers and dryers(that work) are going to someone who can use them.

  15. #14
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    E.Wakefield, NH
    Posts
    28
    Thanks
    2
    Thanked 4 Times in 4 Posts
    I use it more than Craig's List. I have collected huge amounts from Freecycle and it's not as competitive as Craig's List. If you have not tried it you should. I get lot's of appliances, exercise equipment, tons of lawnmowers and computers. I have also picked up some pools. Just last week I did a cleanout from a move and got 6 truckloads of items! I am signed up for 4 different areas that are all within a reasonable drive distance.

    The mods all claim that you are not supposed to ask for scrap or you'll be removed so I have held off doing so. I play the game and put in my requests or have my wife watch when I'm gone. I do see quite a few on there asking for computers. Just yesterday there were 5 people on there asking for any and all computers or parts. Later in the day there were 2 people offering up computer parts. Guess what I got? I'm getting a lifetime of old computers and parts from one and two bags of power cords from another and I didn't have a wanted post up either. I also use it to give away things that are non-scrappable and have a use.

    It's not always first come, first to get it. I have been told by the people I pick up from that I got chosen because I offer a same or next day pickup with options that work for them and I have home and cell #'s in my email signature.

  16. #15
    MrMetal's Avatar
    SMF Badges of Honor


    Member since
    Jul 2011
    Posts
    87
    Thanks
    36
    Thanked 27 Times in 17 Posts
    I use it quite a bit. Facebook, Craigslist and Freecycle ad the best oline sources for scrap for me. There are also some yahoo groups in my area but YMMV..

  17. #16
    SMF Badges of Honor


    Member since
    Jun 2011
    Posts
    38
    Thanks
    11
    Thanked 20 Times in 9 Posts
    In my area most of the activity on freecycle is people trying to find a home for the stuff they don't need/want, yet they don't wish it to be thrown away.

  18. #17
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    E.Wakefield, NH
    Posts
    28
    Thanks
    2
    Thanked 4 Times in 4 Posts
    Quote Originally Posted by fnord View Post
    In my area most of the activity on freecycle is people trying to find a home for the stuff they don't need/want, yet they don't wish it to be thrown away.
    This is true here also. There are the ones I run into who hope it gets used again by me or someone else. I only say I have a use for it in that case. I don't reveal that I may be scrapping it. More often than not the item is broken anyway and needs something to fix it for it to work so a sledgehammer will fix it and my use is the scrap yard.
    There are also those that post specifically for scrap use only.

  19. #18
    SMF Badges of Honor


    Member since
    May 2011
    Posts
    187
    Thanks
    12
    Thanked 63 Times in 29 Posts
    I just got a set of alumimun rims off there and when I went to get them I discovered they will fit my Autocross car so I'm keeping them instead of scrapping.

    My local freecycle is a bunch of people who are like "freegans" and don't want anyone profiting from it. I make sure to put lots of usable but basically worthless things on there and only respond to the ones that have good scrap so they don't think I'm making a profit. For some reason my local group acts like its bad to be profiting. I don't see it that way, you are keeping stuff out of the landfill and promoting recycling.

    BTW, it's a good source of lumber. The sides of my scrap trailer are made out of Freecycle plywood.

  20. #19
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    E.Wakefield, NH
    Posts
    28
    Thanks
    2
    Thanked 4 Times in 4 Posts
    fiat...Nice score on the rims. Yes there are some people on there that would have a cow to think what they were offering was getting scrapped. Then again there are too many posts like "for scrap only" or " Broken for parts only" or "can't get this thing to start..it's yours".
    I have used it enough that I'll actually get calls now for repeat pickups. If I get something that is specifically posted as scrap I give them a card and they will call back for something eventually.

  21. #20
    SMF Badges of Honor


    Member since
    May 2011
    Posts
    187
    Thanks
    12
    Thanked 63 Times in 29 Posts
    I had a couple in the Army that would repeat call me like that. They finally moved and when they did they gave me a ton of stuff. I got a huge working osilioscope, an HP spectral analyser and huge stack of routers off them. I've been hanging onto the older electronic gear but I'm thinking of cutting it up as I haven't sold it yet. These things have tubes in them and I know some of the old tubes are very valuable if they are working.


  22. Similar threads on the Scrap Metal Forum

    1. Freecycle best way to post a wanted ad...
      By drewan in forum General - Let's talk business
      Replies: 5
      Last Post: 05-19-2012, 11:02 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 5 users browsing this thread. (0 members and 5 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook