Page 1 of 2 12 LastLast
Results 1 to 20 of 23

Possible Gold Mine??

| Scrap Metal Spots
  1. #1
    Salival426 started this thread.
    Salival426's Avatar
    SMF Badges of Honor

    Member since
    Mar 2013
    Location
    Denton, TX
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Possible Gold Mine??

    I have a deer lease thats about 75 miles from the closest scrap yard. However on this land there are piles of drill stem, fence pipe, a 30 ft camper, and even the base of an old railcar. I'm not sure if there is enough to make the trips to and from worth it or if I could even do anything with the railcar.What do you guys think?


  2. #2
    Re-cycler is offline Metal Recycling Entrepreneur
    Re-cycler's Avatar
    SMF Badges of Honor

    Member since
    Jun 2011
    Location
    Southwest MN
    Posts
    167
    Thanks
    126
    Thanked 207 Times in 114 Posts
    Not to rain on your parade but doesn't "lease" mean that you are paying to hunt and camp on the property, not that you can take anything off the property?
    Unless of course you have the owner's permission.

  3. #3
    Salival426 started this thread.
    Salival426's Avatar
    SMF Badges of Honor

    Member since
    Mar 2013
    Location
    Denton, TX
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Re-cycler View Post
    Not to rain on your parade but doesn't "lease" mean that you are paying to hunt and camp on the property, not that you can take anything off the property?
    Unless of course you have the owner's permission.
    I have permission to haul everything off. The owner has been asking us to haul it all off for him for five or so years now. Until I found this site I never thought it would be worth our time. So yes i do still have my ethics in tact and am not stealing.

  4. #4
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Minneapolis
    Posts
    593
    Thanks
    324
    Thanked 324 Times in 171 Posts
    Ask if u could charge a disposal fee...free lease for a bit...depending on the quantity, it could be worth it for ya

  5. #5
    Re-cycler is offline Metal Recycling Entrepreneur
    Re-cycler's Avatar
    SMF Badges of Honor

    Member since
    Jun 2011
    Location
    Southwest MN
    Posts
    167
    Thanks
    126
    Thanked 207 Times in 114 Posts
    Quote Originally Posted by Salival426 View Post
    I have permission to haul everything off. The owner has been asking us to haul it all off for him for five or so years now. Until I found this site I never thought it would be worth our time. So yes i do still have my ethics in tact and am not stealing.
    No insult intended,
    It would definitely be worth doing even if it were just break even, I wouldn't ask to paid to haul free metal when doing it as a courtesy will strengthen your relationship with the land owner by cleaning up the property.

  6. The Following User Says Thank You to Re-cycler for This Post:


  7. #6
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Rent a u-haul or if you have a friend then borrow/rent his trailer. A truck and trailer load might make it worthwhile.
    Drill stem should be "heavy metal" price.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  8. The Following User Says Thank You to Mechanic688 for This Post:


  9. #7
    SMF Badges of Honor


    Member since
    Mar 2013
    Location
    NE Oklahoma
    Posts
    16
    Thanks
    9
    Thanked 11 Times in 7 Posts
    Only problem with drill stem pipe is that some of it could be radio active (hot) and will be rejected by the scrap yard. Sometimes a yard will "help" you locate the general location of the source, but then you have to go somewhere else and take what you think the problem is off. Then have it checked again. If there is bunches of pipe you might convience a yard to come out and check it with their giger counter. If it is clean the weight will add up real quick.

  10. #8
    Oldbarnz's Avatar
    SMF Badges of Honor


    Member since
    Jun 2012
    Location
    San Bernardino Mtns
    Posts
    79
    Thanks
    152
    Thanked 120 Times in 35 Posts
    This always gets argued over, but: if you are already going there to hunt, why are you worried about the cost to get stuff to the yard? You were planning on going there anyway. Maybe you take a different vehicle, but it's still a trip you'd have to make. Scrap in the back and a deer on the fender....yee-haw!


  11. The Following 2 Users say Thank You for This Post by Oldbarnz:


  12. #9
    SMF Badges of Honor

    Member since
    Mar 2012
    Location
    Chesaning
    Posts
    472
    Thanks
    24
    Thanked 355 Times in 171 Posts
    Have a yard drop a rolloff

  13. The Following User Says Thank You to ResourcefulRecycling for This Post:


  14. #10
    wayne1956's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Cleburne, TX
    Posts
    705
    Thanks
    195
    Thanked 754 Times in 293 Posts
    As far as the base of the old railcar goes, you would definitely need to talk to the railroad. If it happens to be what is left of one that was sold previously to be used for storage, they may give you a letter stating that it is ok for the scrap yard to take it.

  15. #11
    Salival426 started this thread.
    Salival426's Avatar
    SMF Badges of Honor

    Member since
    Mar 2013
    Location
    Denton, TX
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by TheMetalScrapper View Post
    Only problem with drill stem pipe is that some of it could be radio active (hot) and will be rejected by the scrap yard. Sometimes a yard will "help" you locate the general location of the source, but then you have to go somewhere else and take what you think the problem is off. Then have it checked again. If there is bunches of pipe you might convience a yard to come out and check it with their giger counter. If it is clean the weight will add up real quick.
    I would have never thought of this! I will definitely see what I can do about that but I am pretty sure this stuff is clean.

  16. #12
    Salival426 started this thread.
    Salival426's Avatar
    SMF Badges of Honor

    Member since
    Mar 2013
    Location
    Denton, TX
    Posts
    6
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by wayne1956 View Post
    As far as the base of the old railcar goes, you would definitely need to talk to the railroad. If it happens to be what is left of one that was sold previously to be used for storage, they may give you a letter stating that it is ok for the scrap yard to take it.
    I am pretty sure it was used for a bridge across the creek. the creek erroded out the ground around it and its now one with the creek bed. There are no markings on it for the railroad it's from and there aren't any tracks near this place. I'm considering taking a cutting torch to it or fabbing some sort of tounge and axles once it's out of the creek.

  17. #13
    SMF Badges of Honor


    Member since
    Oct 2010
    Posts
    234
    Thanks
    71
    Thanked 195 Times in 90 Posts
    Quote Originally Posted by Oldbarnz View Post
    This always gets argued over, but: if you are already going there to hunt, why are you worried about the cost to get stuff to the yard? You were planning on going there anyway. Maybe you take a different vehicle, but it's still a trip you'd have to make. Scrap in the back and a deer on the fender....yee-haw!
    Because possibly the scrap yard is the exact opposite direction of where he's heading to the lease from.

  18. #14
    SMF Badges of Honor




    Member since
    Mar 2012
    Location
    ks
    Posts
    2,187
    Thanks
    2,513
    Thanked 2,140 Times in 898 Posts
    Quote Originally Posted by TheMetalScrapper View Post
    Only problem with drill stem pipe is that some of it could be radio active (hot) and will be rejected by the scrap yard. Sometimes a yard will "help" you locate the general location of the source, but then you have to go somewhere else and take what you think the problem is off. Then have it checked again. If there is bunches of pipe you might convience a yard to come out and check it with their giger counter. If it is clean the weight will add up real quick.
    Why exactly would Oil field pipe be radioactive ?
    Alvord iron and salvage
    3rd generation scrapper and dam proud of it

  19. #15
    SMF Badges of Honor


    Member since
    Oct 2010
    Posts
    234
    Thanks
    71
    Thanked 195 Times in 90 Posts
    Quote Originally Posted by taterjuice View Post
    Why exactly would Oil field pipe be radioactive ?
    Some ground is mildly radioactive, especially the deeper you drill.

  20. #16
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Radiation is do to decomposition of natural things on earth that eventually ends up moving downward and getting covered. Radon gas is also a issue in some homes although many think folks make mountain out of a mole hill about it.

  21. The Following User Says Thank You to KzScrapper for This Post:


  22. #17
    SMF Badges of Honor


    Member since
    Mar 2013
    Location
    NE Oklahoma
    Posts
    16
    Thanks
    9
    Thanked 11 Times in 7 Posts
    Quote Originally Posted by taterjuice View Post
    Why exactly would Oil field pipe be radioactive ?
    The radiation comes from the ground they are drilling in. I don't know why it just does. I bought a detecter after getting several pieces of "hot" pipe. Real pain to unload in the heat after busting butt to get it loaded and to the yard. Rust can also be hot. I do not mean surface rust, but rather the kind that has went so far that it flakes. On note if anyone is going to get one do not be fooled by those yellow surplus bomb ones...they do no detect the right type of radiation. I bought a Ludlum and it workes perfect. Many people tell me "there is nothing hot here" only to be suprised when I show them hot pipe laying around. Just passing on something I learned.

  23. The Following 2 Users say Thank You for This Post by TheMetalScrapper:


  24. #18
    Libertytow's Avatar
    SMF Badges of Honor

    Member since
    Sep 2012
    Location
    Silverton NJ
    Posts
    562
    Thanks
    64
    Thanked 340 Times in 180 Posts
    i would jump on that in a heartbeat you could potetially make 5K call local trucking and crane companies see what they would caharge fopar a lift and pull last railcar i did i subbed both out and still maide $4800 the rest is a bonus
    Liberty Towing & Recycling
    (732)279-8599
    Cleaning up NJ 1 LB at a time!
    Certified Mobile Scales
    Fully Insured Carrier usdot # 1802487
    WWW.LibertyTowing.Webs.Com
    WWW.TRRecycles.Webs.com

  25. #19
    SMF Badges of Honor




    Member since
    Mar 2012
    Location
    ks
    Posts
    2,187
    Thanks
    2,513
    Thanked 2,140 Times in 898 Posts
    Never heard of oil field pipe being radioactive before, and everyone around here uses it for about everything. Kinda makes wonder how much oil field pipe I've cut up that might be glowing in the dark somewhere. Good info to have, tho. Learn something new here everyday.

  26. The Following User Says Thank You to taterjuice for This Post:


  27. #20
    SMF Badges of Honor


    Member since
    Oct 2010
    Posts
    234
    Thanks
    71
    Thanked 195 Times in 90 Posts
    "Glowing" might be a strong term. Detectors at yards are pretty sensitive. I set one off after undergoing an angiogram.


  28. Similar threads on the Scrap Metal Forum

    1. Gold mine development
      By Otto in forum Off Topic Discussions
      Replies: 8
      Last Post: 05-09-2013, 09:15 PM
    2. Top Stats isn't working on mine
      By Bear in forum SMF Support Forum
      Replies: 0
      Last Post: 08-23-2012, 04:02 AM
    3. Drought revealing a hidden gold mine?
      By SkyWolfAlpha in forum Scrap Metal Spots
      Replies: 8
      Last Post: 08-14-2012, 11:56 PM
    4. Found a Gold Mine...But There's a Catch...
      By BigRyan in forum A Day in the Life of a Scrapper
      Replies: 6
      Last Post: 04-08-2011, 10:38 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 5 users browsing this thread. (0 members and 5 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook