how do i tell the different grades of circuit boards
Metal Recycling Entrepreneur
how do i tell the different grades of circuit boards
Metal Recycling Entrepreneur
hello Timyi hope you have some thick skin ; ) haha
Metal Recycling Entrepreneur
i think the first rule of thumb, although not carved in stone, is if they're brown or green, the green being the higher grade
|
Do some reading up, that's why we made a sticky out of it.Originally Posted by timy
how do i tell the different grades of circuit boards
http://www.scrapmetalforum.com/elect...rds-parts.html
P & M Recycling - Specializing in E-Waste Recycling.
If you enjoy your freedom, thank a vet.
Power cord power ranger
scratch and sniff test?
Metal Recycling Entrepreneur
ok thanks i am new at this so i have a lot to learn the circuit boards i get out of radios and vhs recorders crt monitors those are all low grade am i right
Most would be low grade. The brown boards are low grade which are what I have found in vcr's, tv's,crt's, vcr's and the like.
If you read all the sticky threads that will help you get up to speed on what's what on ewaste and other scrap. Also take the time to read as much as you can stand in the electronics recycling forum. If you take these actions you will be far ahead of where you are now. Best of luck, Mike.
"Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}
Now go beat the copper out of something, Miked
|
one thing you can also go by .. is if you can break da board it garbage...
second, If there is alot of IC's chips on them they are good stuff,
thrid if thier alot of transformer, its junk most of the time, but take pics and post if You've any question.
We'll be happy to assist,
Scratch and Sniff.. HAHA
Please Add Us On FaceBook, PC SCRAPPER Sioux Falls SD
also our Prices are listed here http://pcscrapperS.com
PC Scrappers LLC
623 S LYON ST SUUTE 200Sioux Falls, SD 57104
1-605-271-2616
|
bnbsfsd, I have to disagree with you. First of all no board is junk, they all have value. I don't know what you are saying " if you can brake the board it's garbage" I can brake a mother board and it'll still be a mother board. If a board has a lot of transformers it's more than likely a power board at .50#.
|
I would have to agree with Happy^^
Recyclable Material Merchant Wholesaler
Certified Zip-Tie Mechanic
"Give them enough so they can do something with it, but not too much that they won't do nothing."
Metal Recycling Entrepreneur
they don't have a power board grade here. If I look in and it isn't green, I use some slip-joint pliers to reach in and grab what transformers, heat sinks, and little copper windings are easily accessible, and then toss it, still attached to whatever it was in, into the shred
|
What he means is low grade boards are very brittle in comparison to, say a motherboard which doesn't just fall apart if you were to drop it on the ground a few times.
Garbage keyboards > spɹɐoqʎǝʞ ʎɐqǝ
|
|
Thanks RCA, thats is exatly right, if You can use very little force to break a board its junk pile board, but if You've to use lot of force then its move up the ladder as far as grade.. I would LOVE to see A BROWN BOARD get HIGH GRADE PRICE.
Metal Recycling Entrepreneur
I'm just getting my scrapping business started and I'm trying to learn what i can. I have several boards that have come from tvs, vcr, washing machines, ect. Where would be a good place to look to see what to pull off so i can increase my profit potential? Pics would be very helpful if possible. Then where is the best place to sell these components and boards?
Crt & Ewaste Specialist
|
Ive done brown boards at highgrade price. But those suckers were very nice. One of those once in a blue moon item
Born to think, destine to succeed.
|
if the board is brown on one side and green on the other it is ultra high grade, keep an eye out for them =)
I buy and sell all types of scrap and escrap. I buy specialty and hard to sell escrap. I buy resale items. PM me or contact me at jghilino@hotmail.com
I AM ACTIVELY BUYING ESCRAP OF ALL TYPES. BOARDS, RAM, CPUS AND MUCH MORE
|
How much will you pay?:confused:
|
|
Boards like the one on the right?
All tracings are gold plated.
Board from a business phone made in the 80's
http://s196.beta.photobucket.com/use...tml?sort=3&o=1
http://s196.beta.photobucket.com/use...tml?sort=3&o=0
Chris
|
|
I was joking about the green/brown thing, most of them are low grade, but you have some of the exceptions. Actually chris what you have there is 2 high grade boards at approx $4 pound. And a low grade at 10 cents. The small high grade one, all of the traces under the green layer are also gold plated.
|
|
The mid sized board is plated under the green layer, the small board is not.
Not many of the business phones I work on are gold plated under the green plating. It seems to be more common with the small LCD boards although I have had some from the same model phone with and without this.
The board with no green coating is a keyboard from a Comdial telephone made in the USA in the 1980's
Chris
There are currently 2 users browsing this thread. (0 members and 2 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks