Results 1 to 15 of 15

Never Agree On A Price Over The Phone

| Scrap Metal Tips and Advice
  1. #1
    Scrap man started this thread.
    Scrap man's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    NY
    Posts
    657
    Thanks
    36
    Thanked 172 Times in 93 Posts

    Never Agree On A Price Over The Phone

    I just thought I would post this tip after I made the mistake today. After having my largest pickup of the year yesterday, I had a pickup today of about 15 computers, a decent sized server, a few printers, and some other boards and parts. The guy mentioned some of the stuff over the phone and told me he wanted $150 for it. From the sound of it, he had enough stuff for that price, so I agreed.

    I get there this morning to pick everything up, and I see that there wasn't nearly the amount of stuff I had thought. There was still enough for me to make a bit of profit at that price, but $150 isn't even close to what I'd usually pay for that amount. I probably wouldn't have offered any more than $120 for it if I had seen it first. I'm just glad it wasn't more money

    There's nothing more fun and more effective than hitting something repeatedly with a sledgehammer

  2. The Following 2 Users say Thank You for This Post by Scrap man:



  3. #2
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    Good advice. I will quote per item prices, but won't give a full price for a load without seeing it first hand.
    "64K should be enough for anybody." - Bill Gates 1981
    http://www.treasurecoastelectronicrecycling.com/

  4. The Following User Says Thank You to parrothead for This Post:


  5. #3
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    things can very easily be misunderstood over the phone. Unless you really know the situation (and the person) very well, I've found it's best to be standing there looking at the job before discussing any costs, charges, payments, haha, or even much of anything else ; )

  6. The Following 4 Users say Thank You for This Post by Bear:


  7. #4
    Scrap man started this thread.
    Scrap man's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    NY
    Posts
    657
    Thanks
    36
    Thanked 172 Times in 93 Posts
    Quote Originally Posted by parrothead View Post
    Good advice. I will quote per item prices, but won't give a full price for a load without seeing it first hand.
    I usually do the same thing. The way the person described it was a lot of boards and other stuff. I was picturing a few boxes of boards and small stuff, but there was only one small box of boards and a few other small things included. I think this was where I went wrong

  8. #5
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Minneapolis
    Posts
    593
    Thanks
    324
    Thanked 324 Times in 171 Posts
    Wow..I wouldve had a hard time paying 50 for that

    Was there any resale there?? Seems quite steep

  9. The Following User Says Thank You to scrappy888 for This Post:


  10. #6
    corycouch's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    jonesboro ar
    Posts
    1,405
    Thanks
    3,766
    Thanked 1,988 Times in 746 Posts
    that may be with computers or on cleanups, but if your buying cars I always make the deal on the phone, make my offer on scrap value and worse case I make my scrap profit, anytime I make a trip without a return load im losing money
    expect the worst and hope for the best
    cory couch
    c & c recycling
    JUNKERS AND CLUNKERS
    (870) 897-6484

  11. The Following 4 Users say Thank You for This Post by corycouch:


  12. #7
    Scrap man started this thread.
    Scrap man's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    NY
    Posts
    657
    Thanks
    36
    Thanked 172 Times in 93 Posts
    Quote Originally Posted by scrappy888 View Post
    Wow..I wouldve had a hard time paying 50 for that

    Was there any resale there?? Seems quite steep
    Well, with about 16 computers at $5 each, a larger server at $10, maybe $20 worth of boards, plus a bunch of larger printers and some smaller stuff, I'd have no problem paying $120 for it. Those are the prices I usually offer, which is how I came up with the price

  13. #8
    Jonniebrass's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    Massachusetts
    Posts
    1,007
    Thanks
    582
    Thanked 496 Times in 296 Posts
    Good advice and a good thread. One mans bunch is another mans couple. A ton of boards in one mans eyes may only equal 10 pounds on my scale.

  14. The Following 2 Users say Thank You for This Post by Jonniebrass:


  15. #9
    webuyselltradestuff's Avatar
    SMF Badges of Honor

    Member since
    May 2013
    Location
    Watkinsville, GA
    Posts
    950
    Thanks
    131
    Thanked 1,284 Times in 583 Posts
    No reason you couldnt have renegotiated on the spot....just say "I normally stick with the price I quote because I dont short my customers (hurts your rep you know)...but I guess I was mistaken somehow...what I thought we were biddibg on is different that what it here (tell him what you thought vs what is there specifically)...I really can olny pay $ x for it...I gotta eat you know!" . And then renegotiate it...you gave him facts as to why it was different...just be prepared to walk...dont buy a losing deal as that sets the precedent the next time he calls you. Negotiate fait and explain why...that will get you referalls and callbacks.

  16. #10
    Scrap man started this thread.
    Scrap man's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    NY
    Posts
    657
    Thanks
    36
    Thanked 172 Times in 93 Posts
    Quote Originally Posted by webuyselltradestuff View Post
    No reason you couldnt have renegotiated on the spot....just say "I normally stick with the price I quote because I dont short my customers (hurts your rep you know)...but I guess I was mistaken somehow...what I thought we were biddibg on is different that what it here (tell him what you thought vs what is there specifically)...I really can olny pay $ x for it...I gotta eat you know!" . And then renegotiate it...you gave him facts as to why it was different...just be prepared to walk...dont buy a losing deal as that sets the precedent the next time he calls you. Negotiate fait and explain why...that will get you referalls and callbacks.
    I know I could have done that, but I just don't feel right about breaking a promise like that. I gave my word, which means a lot to me. I would have felt bad about it and I couldn't imagine the customer would have been too happy either. I'd rather take a hit any day. Oh well. Lesson learned.

  17. #11
    webuyselltradestuff's Avatar
    SMF Badges of Honor

    Member since
    May 2013
    Location
    Watkinsville, GA
    Posts
    950
    Thanks
    131
    Thanked 1,284 Times in 583 Posts
    Well if it were a few bucks...sure. but if itwas significantly different then you have to speak up...be respectful and show him you dont jack your customers...just you cant take a $75 hit on say $175 worth...Iit is business and it is not going back on your word...your price was for X as you understood it...but if there is Y there, you have to walk through it with him. What if you went to buy a used whatever and agrredon price...when you got there it had some issues you were not aware of...say a car...then I bet you would renegotiate...this is the same thing IMO. you quoted in good faith but there was a misunderstanding. Again I wouldnt if iit was just a few $$$ but if enough you have to...its business not personal.

    Good luck!

  18. #12
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    Quote Originally Posted by Scrap man View Post
    I know I could have done that, but I just don't feel right about breaking a promise like that. I gave my word, which means a lot to me. I would have felt bad about it and I couldn't imagine the customer would have been too happy either. I'd rather take a hit any day. Oh well. Lesson learned.
    I think you did right to go ahead with your deal, it's not like either was trying to scam the other, it was just a miss-communication. You still have the customer, you're still on his good side, and if he ever does bring it up, believing he's fixing to get a similar deal, you'll be well prepared to explain that you had to eat the last one, but you thought too highly of the relationship to withdraw an agreement. Then he'll be an even more dedicated customer than ever

  19. The Following 3 Users say Thank You for This Post by Bear:


  20. #13
    Scrap man started this thread.
    Scrap man's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    NY
    Posts
    657
    Thanks
    36
    Thanked 172 Times in 93 Posts
    Quote Originally Posted by webuyselltradestuff View Post
    Well if it were a few bucks...sure. but if itwas significantly different then you have to speak up...be respectful and show him you dont jack your customers...just you cant take a $75 hit on say $175 worth...Iit is business and it is not going back on your word...your price was for X as you understood it...but if there is Y there, you have to walk through it with him. What if you went to buy a used whatever and agrredon price...when you got there it had some issues you were not aware of...say a car...then I bet you would renegotiate...this is the same thing IMO. you quoted in good faith but there was a misunderstanding. Again I wouldnt if iit was just a few $$$ but if enough you have to...its business not personal.

    Good luck!
    I suppose so. It just felt wrong at the time. Now if it were a larger difference or a higher price, I would have definitely renegotiated. And yes, if I were to go to buy something and it wasn't close to the description or I felt as if it had been mis-represented, I would negotiate accordingly. But for that little, I just couldn't bring myself to break my promise. It's hard to put a price on your word, but $30 definitely doesn't cover it.

  21. The Following User Says Thank You to Scrap man for This Post:


  22. #14
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,781 Times in 3,853 Posts
    You can make a buck back quicker then you can get folks to trust your word once you've broken it.

    Just how I view it.

    An I'm not commenting on the deal, just in general is how I mean the above!

    As Al Pacino said in Scarface.."All I got is my balls and my word, and i don't break either for no man!" Or something like that...ha!

    Sirscrapalot - Say hello tah my little frieend! - Tony Montoya/Scarface

  23. #15
    jghilino's Avatar
    SMF Badges of Honor

    Buying Specialty Escrap of all kinds, resale grade computer parts

    Member since
    Sep 2012
    Location
    KANSAS CITY
    Posts
    2,672
    Thanks
    1,429
    Thanked 1,453 Times in 919 Posts
    well when you start opening cases and seeing no cards and one ram chip you know theyre trying to pull one over on you, so i make them take the side off each case so i can inspect before buying


    ive bought a few items sight unseen and they have turned out to be good deals though
    I buy and sell all types of scrap and escrap. I buy specialty and hard to sell escrap. I buy resale items. PM me or contact me at jghilino@hotmail.com
    I AM ACTIVELY BUYING ESCRAP OF ALL TYPES. BOARDS, RAM, CPUS AND MUCH MORE


  24. Similar threads on the Scrap Metal Forum

    1. Regarding apps for your phone
      By mattscrapmetalinc in forum General - Let's talk business
      Replies: 11
      Last Post: 03-02-2013, 07:08 PM
    2. old phone systems
      By HellyeahIcanscrapthat in forum General Electronics Recycling
      Replies: 10
      Last Post: 08-08-2012, 11:24 AM
    3. Looking for a phone
      By GeorgeB in forum General Electronics Recycling
      Replies: 12
      Last Post: 01-03-2012, 03:17 PM
    4. Phone system??
      By sabicp in forum General Electronics Recycling
      Replies: 3
      Last Post: 12-31-2011, 09:20 PM
    5. Funny price tactics at local yard.. (over phone vs in person) ????
      By Torker Man in forum A Day in the Life of a Scrapper
      Replies: 12
      Last Post: 10-22-2011, 10:57 PM

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook