Results 1 to 17 of 17
  1. #1
    Kochy started this thread.
    Kochy's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Sunbury, PA
    Posts
    532
    Thanks
    214
    Thanked 276 Times in 138 Posts

    Quick question about moving a lot of towers and what to use.

    Alright, the load that I posted and asked what I should quote I got, I'm going to be picking it up Wednesday afternoon, the gentlemen is on staying after hours for us to do business, so I don't want to take for ever loading it cause the guy is staying on his time to get the stuff out of there. I have a hand truck which is rated for 6 or 700 pounds, and my dad is a carpet installer, so he has a heavy duty carpet cart, which is can handle huge carpet rolls, but its not meant to be pushed with your hands as you have to bend down and walk to push it, I was wondering what I could do or bring or make up to make it so the loading of these computer towers and everything else goes quick so I can get the manager of the building out of there as soon as possible so we don't take up too much of his time.



  2. #2
    SMF Badges of Honor

    Member since
    Aug 2012
    Location
    mileburg pa
    Posts
    255
    Thanks
    3
    Thanked 103 Times in 64 Posts
    something like this might work good
    Shop Harper Steel Convertible Hand Truck at Lowes.com

    with a regular dolly you can prolly only get about6-8 towers at a time .layed flat and stacked.
    then leave them stacked outside .wait till he leaves then load up outside

  3. #3
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    If that carpet cart is low down, how about adding a hunk of rope as a handle attached at each corner. Kind of like the old rope on the snow sled when you were a kid.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  4. The Following 3 Users say Thank You for This Post by Mechanic688:


  5. #4
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    Move faster......Just kidding....I use a dolly myself and do the best I can

  6. #5
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    How about renting a pallet jack?
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  7. #6
    GeorgeB's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Manassas Park, VA
    Posts
    2,919
    Thanks
    462
    Thanked 639 Times in 432 Posts
    I helped a buddy of mine a few times that worked for an IT Recycling co.

    He built a computer card on wheels out of wood, that could hold upwards of 30 pcs at a time. It helped us out a LOT when we did pickups.

    All it was, was one big piece for the back. The top was open, had 4 or 5 shelves. It some what long. Perhaps 5 or 6 people long. It was awesome!
    George Beale - Founder & President - info@viprecyclingjunkremoval.com
    VIP Recycling Junk Removal LLC - Premier Scrap Metal, Junk, & Electronic Recyclers!
    http://www.viprecyclingjunkremoval.com

  8. #7
    Kochy started this thread.
    Kochy's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Sunbury, PA
    Posts
    532
    Thanks
    214
    Thanked 276 Times in 138 Posts
    The thing is, we are taking a Chevy Express 2500 Cargo Van (My dad's carpet van, We're gunna empty out all the tools and what not) and we are pulling our Holmes 5x10 trailer. From all the crap in the room I kind of think it might be filled, but my dad is saying you could probably fit all that in just the van. I said " Yeah if you don't want to be able to drive and still have stuff left over then yes.


    George, would you happen to have a picture of something with the cart in it, I can't really envision it by how you're saying.

  9. #8
    msmoorad's Avatar
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    Durban, South Africa
    Posts
    690
    Thanks
    715
    Thanked 746 Times in 356 Posts
    have u thought about hiring a trailer just for the day?
    it might be feasible if it can handle the entire load.

    it will save u the headache of having to make more then one trip, which could happen.

  10. #9
    GeorgeB's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Manassas Park, VA
    Posts
    2,919
    Thanks
    462
    Thanked 639 Times in 432 Posts
    Quote Originally Posted by Kochy View Post

    George, would you happen to have a picture of something with the cart in it, I can't really envision it by how you're saying.
    I unfortunately never took a picture of it. This was roughly 2 years ago or so, before I really got into electronics recycling. It was something he had built, as he said, it worked a lot more than a simple hand card the company provided him.

    I know it was a tad over 5 foot tall, I would say roughly 5 or so feet long.

    Like I said, if I remember correctly, it was one big piece for the back, then 2 pieces that made up the sides, and then 3 or 4 shelving pieces, that got screwed in from the side and back.

    It was extremely sturdy. I guarantee we had several hundred lbs on it at a given time. Like I said, each roughly could hold maybe 10 desktops, perhaps 1 or 2 more. And plenty of room for keyboards and monitors.

    Wish I had a picture myself, because I would build one lol.

  11. #10
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    A two wheel dolly and a flat cart should get you through it. Use the flat cart for bigger pieces, boxes, stackable items, and the dolly for flat stackable things. After you get it loaded you can lay the dolly on top somewhere and tie it down with the load. The flat cart/s should fit behind the seats of the truck or drop into the back somewhere. Both these are movers tools and are well adapted for quickly moving most anything through long hallways, tight turns, narrow doorways etc
    There's a thread on here somewhere about stacking computers onto a trailer, you might find some ideas there for stacking the load higher if need be
    Last edited by Bear; 07-15-2013 at 04:51 PM.

  12. #11
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,781 Times in 3,853 Posts
    I'm with the others..Handcart/dolly it out, then load it up in the van. Using the van you'll need to get creative to fit it all in in one go. It's all in how you pack it, whether truck/van/trailer/car/etc.

    Then again I've unloaded trucks for ToysRus, Amazon.com, and other places, an we did all by hand. So I'm not the smartest guy to ask..just ask my back..LOL.

    Sirscrapalot - When you buy a twin size bed, shouldn't it include a a twin of you?

  13. #12
    Jonniebrass's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    Massachusetts
    Posts
    1,007
    Thanks
    582
    Thanked 496 Times in 296 Posts
    Just a thought , make sure you save room for your hand truck or cart for the ride home. I made that mistake in the past.

  14. #13
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,781 Times in 3,853 Posts
    That's what the roof an straps are for Jonnie...

    Sirscrapalot - Just kidding..or is he..?

  15. #14
    SMF Badges of Honor

    Member since
    May 2013
    Location
    Adams County, IN
    Posts
    69
    Thanks
    121
    Thanked 85 Times in 38 Posts
    Before you leave the shop, make a 2' by 4 or 6' plywood platform to set on the carpet cart. screw a couple of pieces of 2x4 to it so it won't slip off the cart. don't go wider than 2' so it will fit thru doors without scratching the frame. Use the ratchet straps to secure each stack of towers to the cart so they won't slide off. Take a gaylord along to put all the junk in that will end up as shred. Take another box for wire as well as a good pair of wire cutters. Stop by wal-mart and buy a couple of plastic storage bins for about 5 bucks each with lids. (Also purchase a set or two of 14' ratchet straps if you don't have) Stack the bins on the hand truck to haul keyboards, mice, speakers, etc to the trailer (secure bins with a ratchet strap for safety) with the gaylord on a pallet. Cut off the wires as you through each piece in the gaylord for shred and through the wire in the other box while you or your Dad load the towers in the Van. This will save you a lot of time in the long run.

    As for how much stuff your Dad says the van will hold I offer this advice - NEVER underestimate how much stuff a "rugman" can stuff in a van. My father-in-law was an installer for years and I honestly think he could put 10 lbs of $hit in a five pound bag.

    Hope this helps.

  16. The Following User Says Thank You to TheRecycleBin for This Post:


  17. #15
    Kochy started this thread.
    Kochy's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Sunbury, PA
    Posts
    532
    Thanks
    214
    Thanked 276 Times in 138 Posts
    We stuff a bunch of stuff in it lol, just today, we had three rolls of frizai, 4 rolls of the premium quality pad, a trash can, and the carpet cart. It was packed lol.

  18. #16
    TheRecycler's Avatar
    SMF Badges of Honor


    Member since
    Jan 2013
    Location
    Ithaca, NY
    Posts
    616
    Thanks
    31
    Thanked 413 Times in 199 Posts
    Quote Originally Posted by Kochy View Post
    Alright, the load that I posted and asked what I should quote I got, I'm going to be picking it up Wednesday afternoon, the gentlemen is on staying after hours for us to do business, so I don't want to take for ever loading it cause the guy is staying on his time to get the stuff out of there. I have a hand truck which is rated for 6 or 700 pounds, and my dad is a carpet installer, so he has a heavy duty carpet cart, which is can handle huge carpet rolls, but its not meant to be pushed with your hands as you have to bend down and walk to push it, I was wondering what I could do or bring or make up to make it so the loading of these computer towers and everything else goes quick so I can get the manager of the building out of there as soon as possible so we don't take up too much of his time.
    Dude, by any means necessary. You can get this done. Little by little. Just get started.
    Your Trash-My Cash
    Yours Truly, TheRecycler:
    RecycleReuseItAll@Facebook.com

  19. #17
    SMF Badges of Honor

    Member since
    May 2013
    Location
    Adams County, IN
    Posts
    69
    Thanks
    121
    Thanked 85 Times in 38 Posts
    Quote Originally Posted by Kochy View Post
    We stuff a bunch of stuff in it lol, just today, we had three rolls of frizai, 4 rolls of the premium quality pad, a trash can, and the carpet cart. It was packed lol.
    Been there, done that with the father-in-law, and always on the hottest, most humid day to boot. Makes the barley pop taste even better lol. Good luck with the load of towers.


  20. Similar threads on the Scrap Metal Forum

    1. Replies: 17
      Last Post: 05-23-2012, 08:28 PM
    2. quick question
      By DropYoTop in forum General Electronics Recycling
      Replies: 7
      Last Post: 05-14-2012, 01:12 PM
    3. Quick question about Sims.
      By Taylor586 in forum Scrap Metal Tips and Advice
      Replies: 21
      Last Post: 04-26-2012, 05:31 PM
    4. Quick question on IC chips
      By PartTimeScrapper in forum General Electronics Recycling
      Replies: 23
      Last Post: 08-16-2011, 11:52 PM

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook