Results 1 to 11 of 11

our world is about to change BIG TIME!!!

| Scrap Metal Tips and Advice
  1. #1
    EcoSafe started this thread.
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts

    our world is about to change BIG TIME!!!

    GRAPHENE ! google it. will replace gold in computers and other e systems.

    will replace motherboards.

    is 1 million times faster then the fastest chip.

    will transfer one Terabite in one second.



    It is a ultra conductivity material.

    can be manufactured to one atom thickness (one millionth the thickness of a human hair)

    can be easily reconfigured with a simple lazier.

    It's real and it's here now

    You need to learn about this. Be ahead of the game.

    I believe it may well affect gold values by eliminating industrial necessity.
    "anyone who thinks scrappin is easy money ain't doin it right!"

  2. The Following 11 Users say Thank You for This Post by EcoSafe:



  3. #2
    PickerBenny's Avatar
    SMF Badges of Honor


    Member since
    Feb 2014
    Location
    Erie, PA
    Posts
    255
    Thanks
    15
    Thanked 374 Times in 107 Posts
    Is graphene more expensive to purchase than gold?

    I hope it can easily be recovered from boards, and have some scrap value

    Watch my scrapping videos on YouTube! Like, Subscribe & Comment! Videos Daily!
    https://www.youtube.com/channel/UCFF...V2NnBiOukrn6Mg

  4. The Following User Says Thank You to PickerBenny for This Post:


  5. #3
    Evan's Avatar
    SMF Badges of Honor

    Member since
    Apr 2014
    Location
    San Jose, CA
    Posts
    87
    Thanks
    83
    Thanked 101 Times in 42 Posts
    Its carbon so not much scrap value.

  6. #4
    EcoSafe started this thread.
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    Graphene has been known for years, the break through was resent, they have basically figured a way to nano tech it. the value is in the use tech patents. The change will be much bigger then the silicon chip. It may well rank with the wheel.

    It will revolutionize solar, electronics, batteries and who knows what all.

    This all depends on weather and how much advancement our nannies in Washington and the corporations let us have.

    The power co is not going to allow a $1000 solar roof to cut them out.

    The major advancements were made by the university of Georgia sooo my guess is, exclusive rights will be sold to some one.

  7. #5
    snapperhead's Avatar
    SMF Badges of Honor


    Member since
    Nov 2011
    Location
    Auckland, NZ
    Posts
    64
    Thanks
    37
    Thanked 113 Times in 39 Posts
    There may be some resistance from manufacturers to adopt this tech change right away. Companies that have invested huge amounts of money in machinery and equipment to manufacture products using existing tech, will not want to scrap the lot and start again. Yes I agree it will be the future, but not starting now.

    It's a bit like the hydrogen fuel cells for vehicles. A great tech advance, but trying to get hydrogen storage into existing fuel stations is just not going to happen without billions and billions of dollars from the fuel companies, to refit there existing stations. It would affect profits negatively to rebuild all existing fuel stations. Like your comment about power co's not allowing cheap solar systems, it's about the profits of existing companies being strongly defended.

    Huge manufacturing companies will resist this change if they get the chance. New emerging companies may adopt this tech from the start as they don't need to scrap existing systems.

    Either way, it will be the consumer that pays, and nano tech won't be cheap for many, many years to come.
    I can only imagine the price of a couple of nano tech, graphene AA batteries for my remote, more than the stereo cost me
    Just my cynical 2 cents

  8. The Following User Says Thank You to snapperhead for This Post:


  9. #6
    SMF Badges of Honor


    Member since
    May 2011
    Location
    Dallas TX
    Posts
    1,979
    Thanks
    158
    Thanked 1,182 Times in 518 Posts
    Quote Originally Posted by snapperhead View Post
    There may be some resistance from manufacturers to adopt this tech change right away. Companies that have invested huge amounts of money in machinery and equipment to manufacture products using existing tech, will not want to scrap the lot and start again. Yes I agree it will be the future, but not starting now.

    It's a bit like the hydrogen fuel cells for vehicles. A great tech advance, but trying to get hydrogen storage into existing fuel stations is just not going to happen without billions and billions of dollars from the fuel companies, to refit there existing stations. It would affect profits negatively to rebuild all existing fuel stations. Like your comment about power co's not allowing cheap solar systems, it's about the profits of existing companies being strongly defended.

    Huge manufacturing companies will resist this change if they get the chance. New emerging companies may adopt this tech from the start as they don't need to scrap existing systems.

    Either way, it will be the consumer that pays, and nano tech won't be cheap for many, many years to come.
    I can only imagine the price of a couple of nano tech, graphene AA batteries for my remote, more than the stereo cost me
    Just my cynical 2 cents
    and....I was going to say the same thing. Even tho its out it will be a few year before its used in computers. It will have to be tested and most likely rolled out in servers first (higher costs in gear than a $300 laptop) but for the switch your talking billions if not in the trillions to do a full switch on how they are made unless they find a way to use the gear they have now and convert it...still high costs and down time.
    My company name was Easy Recycle but has since been closed
    My Name Stephan Harz
    My YouTube page

  10. #7
    AuburnEwaste's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    Metro Detroit
    Posts
    773
    Thanks
    32
    Thanked 976 Times in 413 Posts

    our world is about to change BIG TIME!!!

    I dont think this will replace the Gold in computers one bit. It might replace the Copper though. Parts in computers will still need to be protected from corrosion.

  11. #8
    EcoSafe started this thread.
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    I've never seen corroded graphite carbon. The replacement of gold will depend on price and quantity available. They have been trying to find a sutible replacement for gold in electronics for ever. you have to read about this stuff to half understand what it is capable of.

    Imagine an I c chip and the hair size gold transmitter wires now imagine one, 1 million times smaller transmitting one million times faster and 300 times stronger then steel.

  12. #9
    snapperhead's Avatar
    SMF Badges of Honor


    Member since
    Nov 2011
    Location
    Auckland, NZ
    Posts
    64
    Thanks
    37
    Thanked 113 Times in 39 Posts
    At least they wont be substituting every bit of gold for carbon. Gold is such a dependable element for contact points and critical electronic component joins (like gold finger and pin connections).

    I can see that once they have developed hyper speed, nano tech components like IC's, all the other components that support the chips will need to be completely reworked, or reinvented to cope with the new speeds and sizes. It made me think of having a Hayabusa engine installed into an Indian scout chassis, it just couldn't cope and just pushing the starter button would tie that bendy frame into knots. Let alone trying to stop it, if you make the first corner.

    I agree it will happen for us (well you, because I am older than the Himalaya mountains), but it's going to take some time before it makes it to consumer type products.

  13. #10
    MattInTheHat's Avatar
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    rock hill, sc
    Posts
    1,464
    Thanks
    1,142
    Thanked 1,396 Times in 703 Posts
    The smart ones won't resist if it can be proven cheaper and better. Carnegie steel was know for ripping out machinery that was months old when a significant advancement was made.

    Being the one with the first license could make it so you are up and running while others are still getting set up. the big unknown is cost and availability of graphene
    Currently looking for a job in or related to scrap/recycling. Relocation is possible for the right offer.

  14. #11
    british's Avatar
    SMF Badges of Honor


    Member since
    Jan 2013
    Location
    ENGLAND UK
    Posts
    105
    Thanks
    236
    Thanked 110 Times in 55 Posts
    Quote Originally Posted by olddude View Post
    I've never seen corroded graphite carbon. The replacement of gold will depend on price and quantity available. They have been trying to find a sutible replacement for gold in electronics for ever. you have to read about this stuff to half understand what it is capable of.

    Imagine an I c chip and the hair size gold transmitter wires now imagine one, 1 million times smaller transmitting one million times faster and 300 times stronger then steel.
    Yes a UK company has made this tech ..But still it's a reasearch thing....As with all tech they have spent millions of hours and pounds so will not give too much away as they don't don't realy want to follow through just sell the tech and take the money and run (As is in the UK-Get rich quick- if it's not the way it turns out - iv'e got the money -bye).

    British - seen this many times - Manchester university (11 miles away did the first computer) - Internet (WWW) 2 British guys - WOW


  15. Similar threads on the Scrap Metal Forum

    1. So the winds of change have come and its time to try and be a full time scrapper
      By jthetravelingguy in forum General - Let's talk business
      Replies: 8
      Last Post: 02-22-2014, 09:52 AM
    2. missed ouut big time
      By Mstra in forum A Day in the Life of a Scrapper
      Replies: 6
      Last Post: 05-21-2012, 11:22 PM
    3. Just missed out big time !! Ugh
      By gamedayron in forum A Day in the Life of a Scrapper
      Replies: 17
      Last Post: 02-12-2012, 09:54 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook