Page 2 of 2 FirstFirst 12
Results 21 to 38 of 38

the profesion we have chosen" can be dangerous use caution - Page 2

| Scrap Metal Tips and Advice
  1. #21
    SMF Badges of Honor



    Member since
    Dec 2012
    Location
    elkton,md
    Posts
    1,062
    Thanks
    8,524
    Thanked 1,470 Times in 600 Posts
    Quote Originally Posted by Mechanic688 View Post
    REMEMBER that tv's and monitors can hold high voltage for a few days, and unplugging won't help when it's whacking you with a few thousand volts. To be safe, discharge it first!
    Same with microwaves.


  2. The Following User Says Thank You to junkfreak for This Post:



  3. #22
    SMF Badges of Honor



    Member since
    Dec 2012
    Location
    elkton,md
    Posts
    1,062
    Thanks
    8,524
    Thanked 1,470 Times in 600 Posts
    Great thread. Like to add always know what the other guy(s) is doing also. Just yesterday I was reaching for something in a pile at the same time my helper threw something into the pile and hit my hand. Could have been bad if I hadn't caught in corner of my eye and moved my hand. He is young and lacks experience. I should have been pay better attention. My pop was a fire and safety inspector at a refinery . So I grew up with "safety first". Point is its not just the new guys ,this thread is a good reminder for us all. Thanks olddude. Your wisdom, as always, is much appreciated!

  4. The Following 3 Users say Thank You for This Post by junkfreak:


  5. #23
    DevinThaScrapper's Avatar
    SMF Badges of Honor

    Member since
    Nov 2012
    Location
    Nebraska
    Posts
    588
    Thanks
    120
    Thanked 605 Times in 247 Posts
    Battery backups are bad Also as many people know. Do not leave them on your truck in the rain or outdoors, they could start on fire. Also they pack a mean shock

  6. The Following 2 Users say Thank You for This Post by DevinThaScrapper:


  7. #24
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,591
    Thanked 7,218 Times in 2,256 Posts
    Olddude, great words of wisdom as usual. As my dad always said, we do not have time in one lifetime to learn everything the hard way, take a short cut and learn from others. Just be careful who you are learning from.

  8. The Following 4 Users say Thank You for This Post by Patriot76:


  9. #25
    AdmiralAluminum's Avatar
    SMF Badges of Honor


    Member since
    Jan 2014
    Location
    Ontario
    Posts
    737
    Thanks
    824
    Thanked 968 Times in 415 Posts
    I am the safety rep on the floor at work and have always been a "think first, act second" type of person. That said I still managed to cut my knuckle on cardboard this morning cause I wasn't wearing gloves. I don't wear gloves all day, I just keep them on me; but sometimes you don't see something's possible until it has already happened

    I would also like to point out that there are times when you shouldn't wear gloves for protection but rather should find a safer way of doing what you're doing. Example: my long time friend who I got a job at my work (who was practically born with a hammer in his hand, knowing how to swing it) was drilling holes in extrusion with a drill press and had gloves on for protection/cleanliness. Well, didn't he get a glove caught on the drill bit and barely got his hand away without mutilating it! He turned it off and pulled away but split seconds could have made it much much worse.
    METAL IS MY MISTRESS...PLEASE DON'T TELL MY WIFE!

  10. The Following User Says Thank You to AdmiralAluminum for This Post:


  11. #26
    HiTechMike's Avatar
    SMF Badges of Honor

    Member since
    Mar 2014
    Location
    United States
    Posts
    200
    Thanks
    167
    Thanked 386 Times in 111 Posts
    This can also be a deadly industry. Even for companies that have the highest of certifications and health and safety policies in place.

    2 dead, 1 injured in Granite City mortar explosion

  12. The Following User Says Thank You to HiTechMike for This Post:


  13. #27
    beardo's Avatar
    SMF Badges of Honor



    Member since
    Mar 2013
    Location
    NE South Dakota
    Posts
    220
    Thanks
    56
    Thanked 386 Times in 147 Posts

    the profesion we have chosen" can be dangerous use caution

    Just following the simple rule of wearing the proper PPE can make a huge difference. Eye pro, ear pro, gloves, boots and the right clothing, all the time, every time. How many people on here have a little mark on there gloves from an angle grinder?

    Also I see people wearing the wrong type of gloves all the time. If you are doing anything involving flame or spark your gloves need to be all leather. Mechanics gloves are for turning wrenches, synthetics can and will melt/catch on fire.
    "And if your train's on time, You can get to work by nine, and start your slaving job to get your pay. If you ever get annoyed, Look at me I'm self-employed
    I love to work at nothing all day" -BTO

  14. The Following User Says Thank You to beardo for This Post:


  15. #28
    bigburtchino's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    California
    Posts
    1,647
    Thanks
    4,388
    Thanked 2,835 Times in 1,132 Posts
    As I have supervised and investigated many accidents. The cause and effects of accidents almost always have one thing in common. That is complacency, someone who so sure that they know what they are doing can be the most dangerous person in the work place! Safety starts and ends with each individual. Fatal or bad accidents are almost always a sequence of events, with each action leading to a point of no return and leading to property damage, injury, and death. Almost always could have been prevented if just one action had intervened and with a much more desirable outcome. Another thing to consider, some accidents occur do to what happened outside of the scope of work. If a person brings there problems to the work site, thus not thinking about the job or the safety of self or others a accident is almost always likely!

  16. The Following 2 Users say Thank You for This Post by bigburtchino:


  17. #29
    SMF Badges of Honor



    Member since
    Dec 2012
    Location
    elkton,md
    Posts
    1,062
    Thanks
    8,524
    Thanked 1,470 Times in 600 Posts
    Quote Originally Posted by junkfreak View Post
    Great thread. Like to add always know what the other guy(s) is doing also. Just yesterday I was reaching for something in a pile at the same time my helper threw something into the pile and hit my hand. Could have been bad if I hadn't caught in corner of my eye and moved my hand. He is young and lacks experience. I should have been pay better attention. My pop was a fire and safety inspector at a refinery . So I grew up with "safety first". Point is its not just the new guys ,this thread is a good reminder for us all. Thanks olddude. Your wisdom, as always, is much appreciated!
    Just an update. Apparently I didn't get away so clean . had to go to ER this morning. Doc said I severed a tendon. Needs surgery. Made it worse by not going right away. Be careful out there.

  18. The Following 2 Users say Thank You for This Post by junkfreak:


  19. #30
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Well that F'n sucks...Godspeed.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  20. The Following User Says Thank You to KzScrapper for This Post:


  21. #31
    charn's Avatar
    SMF Badges of Honor


    Member since
    Jan 2012
    Location
    Anywhere But Here
    Posts
    250
    Thanks
    7
    Thanked 110 Times in 60 Posts
    And moisturize. Healthy skin is the first layer of protection.

  22. #32
    BDAScrapper's Avatar
    SMF Badges of Honor


    Member since
    Jan 2015
    Posts
    82
    Thanks
    42
    Thanked 112 Times in 48 Posts
    Last year November, was cutting open some electric motors with my Milwaukee batter 18v grinder, didn't spin up like a corded one, so I figured it would be ass aggressive,.
    So with cigar clenched in my teeth in began cutting the outer shell off to expose the windings, after the tenth one, I got sloppy,MIT kicked, I F'ed it off and kept going, she kicked again, this time it kicked out of my hands and up to my face.
    As I leaned away from it (I was kneeling on the ground cutting outside on the grass) it arced at my face, missed and ran off into the grass. I F'ed it off again and reached of it with my left hand, that's when I noticed that I'd opened myself up on my forearm.....m3 inch cut,you could see the fat and muscle, I could fit my pinky inside of it. Blade was so hot I didn't even feel it, cauterized the skin instantly.....
    a trip down to the H, in the emergency room,wait almost three hours for three **** staples that took 30 seconds, he didn't clean it and I don't like "a local" so I took the pain and got stapled up.
    Even now, I still have hard little bits of dead skin, metal and whatever else pushing its way out of the scar tissue, it's healed up nice but will leave a black scar, reminding how much of an absolute idiot I was.
    Broke so many of my rules in that one instance, but sometimes it's good to be bit, it teaches you to "simmer down and pay attention" as the next one might not just be three staples.....
    p.s. No hand guard, no gloves, no googles, and no hand grip.... All of which are affixed now. And I frigged up a good cigar....
    "Haste makes waste" and "children and fools shouldn't play with sharp tools" ring to mind....

  23. The Following 2 Users say Thank You for This Post by BDAScrapper:


  24. #33
    SMF Badges of Honor



    Member since
    Dec 2012
    Location
    elkton,md
    Posts
    1,062
    Thanks
    8,524
    Thanked 1,470 Times in 600 Posts
    Quote Originally Posted by BDAScrapper View Post
    Last year November, was cutting open some electric motors with my Milwaukee batter 18v grinder, didn't spin up like a corded one, so I figured it would be ass aggressive,.
    So with cigar clenched in my teeth in began cutting the outer shell off to expose the windings, after the tenth one, I got sloppy,MIT kicked, I F'ed it off and kept going, she kicked again, this time it kicked out of my hands and up to my face.
    As I leaned away from it (I was kneeling on the ground cutting outside on the grass) it arced at my face, missed and ran off into the grass. I F'ed it off again and reached of it with my left hand, that's when I noticed that I'd opened myself up on my forearm.....m3 inch cut,you could see the fat and muscle, I could fit my pinky inside of it. Blade was so hot I didn't even feel it, cauterized the skin instantly.....
    a trip down to the H, in the emergency room,wait almost three hours for three **** staples that took 30 seconds, he didn't clean it and I don't like "a local" so I took the pain and got stapled up.
    Even now, I still have hard little bits of dead skin, metal and whatever else pushing its way out of the scar tissue, it's healed up nice but will leave a black scar, reminding how much of an absolute idiot I was.
    Broke so many of my rules in that one instance, but sometimes it's good to be bit, it teaches you to "simmer down and pay attention" as the next one might not just be three staples.....
    p.s. No hand guard, no gloves, no googles, and no hand grip.... All of which are affixed now. And I frigged up a good cigar....
    "Haste makes waste" and "children and fools shouldn't play with sharp tools" ring to mind....
    You said it all

  25. #34
    SMF Badges of Honor



    Member since
    Dec 2012
    Location
    elkton,md
    Posts
    1,062
    Thanks
    8,524
    Thanked 1,470 Times in 600 Posts
    Quote Originally Posted by KzScrapper View Post
    Well that F'n sucks...Godspeed.
    Yeah it does. Iam already rammie can't stand being limited. Lol

  26. #35
    bigburtchino's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    California
    Posts
    1,647
    Thanks
    4,388
    Thanked 2,835 Times in 1,132 Posts
    BDAscrapper - Ouch!

  27. The Following User Says Thank You to bigburtchino for This Post:


  28. #36
    EcoSafe started this thread.
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    Very sorry to hear that. Here is where I tell you to do what I say not what I do. We are nature a though bunch. BUI I have buried bits of metal which make my right finger hard to use. a month ago I cut the top middle section of my finger off because I was in a hurry and being stupid. I went to the house put it back on and just taped it never went to the doc. it has grown back on But now Im stuck with bits of the cut off wheel in my finger. be very careful out there its hard to scrap with one arm , hand or missing fingers.
    "anyone who thinks scrappin is easy money ain't doin it right!"

  29. The Following 2 Users say Thank You for This Post by EcoSafe:


  30. #37
    bcrepurposing's Avatar
    SMF Badges of Honor


    Member since
    Dec 2013
    Location
    Northern Central MN
    Posts
    152
    Thanks
    3
    Thanked 155 Times in 69 Posts

    the profesion we have chosen" can be dangerous use caution

    i have tried in the past to post "darwin award" info as well for more dagerous activities or those with high injury potential. granted the warnings may have had humor in tone but were serious none the less.

    my closest call was working fridges with my domestic partner getting ready to haul in a load. a fridge came out of the stack on the trailer while strapping it down and jagged metal from where i cut compressor tray out missed my neck by less than an inch. jumping back and using my arm to try to turn it away i still took nearly 250 lbs as a fairly solid hit to my shoulder / arm and was out of commission nearly 3 weeks before i got strength back in that arm and could move it regular.

    its not just tools and breaking things down we need to watch for. some of us work with very heavy items and many dont do it smartly and get lucky. i got extremely lucky. i could have been killed or crushed and ended up with pain and bruises only.

    this is also why i work with a second person at all times loading and unloading and keep visual and verbal contact at all times. we may not see the item drop. they might. also it gives you a chance to get to a hospital if you are not so lucky.

    i load / unload for processing with a skidloader now. saves the back alot seeing i would stack appiances by hand in my load otherwise. but even that has risks if no respect is given where its due. i work smarter not harder now but have not forgot that jagged metal falling at my neck.

    heed the warnings people. its not a matter of if you will be hurt... its a matter of how bad and if you live through it.
    "Reuse, Repurpose, Recycle..." - BC Repurposing Motto

    www.bcrepurposing.weebly.com
    https://www.facebook.com/bc.repurposing

  31. The Following 2 Users say Thank You for This Post by bcrepurposing:


  32. #38
    SMF Badges of Honor

    Member since
    Dec 2014
    Location
    Mn
    Posts
    16
    Thanks
    10
    Thanked 15 Times in 8 Posts
    As i'm driving to work I see a blind man almost every day walking to work i assume. My dad told me his story. One day he put a new grinding stone on his bench grinder and didn't check the stone speed rating. The last thing he saw was his finger flipping the switch on the grinder. The stone exploded and he lost both eyes. 33 years young.
    So now you're thinking yeah ok be careful. The very next day my dad put a new wire wheel on his bench grinder and he had the same experience. He hadn't check the speed rate and it to exploded. Fortunately he had his safety glasses on, was not injured and able to clean up his own mess.
    Don't confuse accidents with carelessness.
    Be Safe. Be Smart.

  33. The Following 2 Users say Thank You for This Post by CuAl:



  34. Similar threads on the Scrap Metal Forum

    1. Word of caution for those who think they're scrappers!
      By 12oclock in forum Off Topic Discussions
      Replies: 31
      Last Post: 02-16-2015, 09:10 PM
    2. Replies: 3
      Last Post: 06-27-2012, 11:00 PM
    3. Storage of TVS outside..Good or Bad...or Dangerous???
      By WESTERNREACH in forum TV and Monitor Recycling
      Replies: 29
      Last Post: 01-03-2012, 05:54 PM
    4. CAUTION: don't be TOO helpfull
      By EcoSafe in forum General - Let's talk business
      Replies: 17
      Last Post: 12-13-2011, 03:49 PM
    5. Market Caution
      By Victor in forum Off Topic Discussions
      Replies: 17
      Last Post: 10-03-2011, 04:45 PM

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 9 users browsing this thread. (0 members and 9 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook