I hope it helps.
Credits to Youtube Vicsonvee's channel
Metal Recycling Entrepreneur
|
I hope it helps.
Credits to Youtube Vicsonvee's channel
Last edited by ginofrater; 08-01-2013 at 07:37 PM.
Metal Recycling Entrepreneur
Nice manual method.
Myself? Angle grinder with cut-off disk. Half the time. Wear safety glasses! And DO NOT cut the string first....it helps hold it all together for the cut.
Metal Recycling Entrepreneur
|
|
I think this is a nice way to do it, for who don't have electric tools.Originally Posted by Enoch43
Thanks for sharing your way to do it.
Metal Recycling Entrepreneur
|
is it worth more to take the copper wire out of the coil
Rural scrapper
Chop saw does wonders for this process !
Alvord iron and salvage
3rd generation scrapper and dam proud of it
|
Are you serious, take it out and you have #2 clean and who knows what they pay for the coil, maybe motor price.
Big difference. Read, read the answers are already here.
P & M Recycling - Specializing in E-Waste Recycling.
If you enjoy your freedom, thank a vet.
Metal Recycling Entrepreneur
|
Value of Fridge compressor as mixed metal/iron = NZ$1 (thats IF they take them, most don't)
Value of fridge compressor after the Coppers removed NZ$0.90 cents
Value of Copper removed from Fridge compressor NZ$6.50
Cost of Grinder & disc per compressor NZ$0.40 cents
Profit of NZ$7.00 per compressor for your time taken.
Last edited by eesakiwi; 09-26-2013 at 01:49 AM.
|
As with any other scrap deciding how far you're going to break it down depends on the individual and how much material you have to process. Personally I remove copper from motors like the guy in the video. It only takes a few minutes and you have some nice #2 copper. I learned the hard way to always check first and make sure it is copper and not aluminum.
|
8 minutes to gut a small stator is too long, get out the angle grinder, hammer and screwdriver for petes sake
I buy and sell all types of scrap and escrap. I buy specialty and hard to sell escrap. I buy resale items. PM me or contact me at jghilino@hotmail.com
I AM ACTIVELY BUYING ESCRAP OF ALL TYPES. BOARDS, RAM, CPUS AND MUCH MORE
Too long, I cut off one end on a bandsaw, then press out the rest. 2 minutes at most.
|
This is not really an "easy" way to do this job.
AMERICAN BORN, AMERICAN BRED! AND I'M PROUD TO BE AN AMERICAN!!!
|
I use a grinder. Sawsall tends to rip and pull at some of the strands. Band saw only works if its a good one, a lot of the cheap ones bind up on stuff like this.
As to weather its worth it, it depends on the motor some have more copper than others. I like fan motors from the osculating fans.
Keeper of the Cooler!
|
Matt..shh! Now everyone will be out collecting fans!
Sirscrapalot - Loves some of those fan motors.
|
|
just some advice, add a vice to this project
Matt hopes none of his fan motors are cheating on him with Sirscrapalot
|
Thanks for the video, it was very informative.
This is a hard business to be in without power tools. I picked up a 4 1/2" grinder for $20 from HF. It's been dropped, drugged across the floor, left out in the rain, the handle broke off, etc and it keeps chugging along. Probably one of the better $20's I've ever spent.
|
I agree wiyh Idaho. 4 1/2" grinder from HF is the second most used electric tool I have. The first most used tool I have is a cordless screwdriver from Walmart for 20.00$
There are currently 1 users browsing this thread. (0 members and 1 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks