CopperMineTools Wire Strippers on Ebay!

Hello everyone!

We are CopperMineTools providing wire stripping products, if any of you have questions or want to get in contact with us you can do so in this thread, by PM, on Twitter @CopperMineTools www.twitter.com/copperminetools on our website:

CopperMine Tools - Wire Strippers and Cable Stripping Machines

and on our ebay page

copperminetools on eBay

Let us know what you think!

Whoops! Mis-linked our ebay page, it's copperminetools on eBay

Correct links can be found in my signature.

Originally Posted by redcrossnj

Bought your red stripper a few months back. I love it. it has made me so much money. Thank you for a great and affordable product

Which model did you get? Mike

Wow that is at the top of my list. Wish I had one for the coming winter down time.

I've been eyeballing your stuff for quite a while...probably going on my xmas list!

Maybe offer a discount for SMF members? Hmmmmmmmmm?

Glad to hear you like the product!

Have a few larger powered models to unveil soon, but for now check out this large-capacity model.

http://www.amazon.com/gp/product/B00MEMG7Y0

Glad to hear from you guys.

Video of our Model 500 just finished up editing last week. Check it out!

Originally Posted by CopperMine

Video of our Model 500 just finished up editing last week. Check it out!

My feedback on product:


Ordering process: good, email address, make account, paid with CC.

Shipping, order processing: A+ ordered on Monday 11/24/14, received Saturday 11/29/14. Arrived early Mainly because FedEx is running 7 Days a week for the holidays. (Tracking said Monday 12/1/14) Pleasant surprise.

Heavy beast, be there to help the poor FedEx man. comes in 3 boxes and requires assembly. But shipping could not be free if it was assembled. Weighs in at 320lbs, and would require a forklift.

Packaging was good. A few cosmetic dings and scratches, but that's to be expected.

Ease of assembly C+ larger pictures and more detailed instructions would be nice, but not too bad. Bolts for each individual part are zip tied in a bag to the part they belong to, which was very nice. Better than searching for bag "b" that attaches to part "f". (Like you get with particle board furniture for example). Assembly time for me was 1.5 hours, but I'm slow.

First thing I noticed after assembly was the cord is too short! I will most likely replace the power cord with one at least 3X longer. No big deal, I just have enough extension cords running all over the place already. Edit: after reading the operators Manual it says: "Plug into wall outlet directly or use short 10 gauge extension cord." Too long of an extension cord drops the voltage below 120 volts. Ok so my gripe is make the cord at least long enough to reach a chest high outlet.

Appearance A+ beautiful looking machine!!!

Operation: First thing I noticed is it's loud. Part of that could be the fact that it's only 10 degrees in my shop right now. But it fired right up.

Fed in various sizes of wire, and it stripped like a banshee. Takes a long length of wire and spits it out the other side nicely stripped. Short stuff also. My wire had a few kinks in it, didn't seem to bother the machine at all.

Overall, very happy with product thus far. Works just like in the video only louder.

Originally Posted by pjost

My feedback on product:


Ordering process: good, email address, make account, paid with CC.

Shipping, order processing: A+ ordered on Monday 11/24/14, received Saturday 11/29/14. Arrived early Mainly because FedEx is running 7 Days a week for the holidays. (Tracking said Monday 12/1/14) Pleasant surprise.

Heavy beast, be there to help the poor FedEx man. comes in 3 boxes and requires assembly. But shipping could not be free if it was assembled. Weighs in at 320lbs, and would require a forklift.

Packaging was good. A few cosmetic dings and scratches, but that's to be expected.

Ease of assembly C+ larger pictures and more detailed instructions would be nice, but not too bad. Bolts for each individual part are zip tied in a bag to the part they belong to, which was very nice. Better than searching for bag "b" that attaches to part "f". (Like you get with particle board furniture for example). Assembly time for me was 1.5 hours, but I'm slow.

First thing I noticed after assembly was the cord is too short! I will most likely replace the power cord with one at least 3X longer. No big deal, I just have enough extension cords running all over the place already. Edit: after reading the operators Manual it says: "Plug into wall outlet directly or use short 10 gauge extension cord." Too long of an extension cord drops the voltage below 120 volts. Ok so my gripe is make the cord at least long enough to reach a chest high outlet.

Appearance A+ beautiful looking machine!!!

Operation: First thing I noticed is it's loud. Part of that could be the fact that it's only 10 degrees in my shop right now. But it fired right up.

Fed in various sizes of wire, and it stripped like a banshee. Takes a long length of wire and spits it out the other side nicely stripped. Short stuff also. My wire had a few kinks in it, didn't seem to bother the machine at all.

Overall, very happy with product thus far. Works just like in the video only louder.

Hey! Thanks a ton for the review! We very much appreciate it! Improving the assembly document is on the schedule.

We're offering a special sale ONLY for members of SMF! 10% all products for the holiday season, simply call us up to order over the phone at 1-855-643-7491 and mention Scrap Metal Forum in your call. Alternatively you can use the code "TSMF2014" on our website (www.copperminetools.com) in the 'promotion code' box at checkout!

Originally Posted by redcrossnj

Do you guys have videos for all your high end strippers ? . I was looking at the 399.99 one . The one with the crank . Thanks

kevin

Unfortunately the only video we have is of our most expensive, industrial, Model 500.

Videos of other products in the works though!

Forgot to mention that this 10% off promotion is only available until the end of this month (November).

Don't mean to dis your product in any way, but is the price on this a typo?

Coppermine Tools Powered Wire Stripping Machine Motor Up to 2 1 4" OD Wire 430 | eBay

If not what makes this machine so special?

Originally Posted by pjost

Don't mean to dis your product in any way, but is the price on this a typo?

Coppermine Tools Powered Wire Stripping Machine Motor Up to 2 1 4" OD Wire 430 | eBay


If not what makes this machine so special?

So this is just our way of communicating that an item is out of stock. Ebay's out of stock feature is still new, and in our experience quite buggy, and we want to preserve our listings so instead of ending it we just skyrocket the price.

Originally Posted by CopperMine

So this is just our way of communicating that an item is out of stock. Ebay's out of stock feature is still new, and in our experience quite buggy, and we want to preserve our listings so instead of ending it we just skyrocket the price.

I see. IMHO you should find another way to communicate that an item is out of stock. For example, this was the first machine that I looked at, and I thought to myself, "these people are out of their minds with pricing!" If you hadn't been a SMF member I would just move on to your competition.

Just something to think about.

Originally Posted by pjost

I see. IMHO you should find another way to communicate that an item is out of stock. For example, this was the first machine that I looked at, and I thought to myself, "these people are out of their minds with pricing!" If you hadn't been a SMF member I would just move on to your competition.

Just something to think about.

Thanks for the input, we'll definitely look into other options.