Results 1 to 20 of 61

Cashing in, is only a matter of time.

| Scrap Metal Tips and Advice

Threaded View

TheRecycler Cashing in, is only a matter... 02-09-2015, 01:41 PM
mikeinreco problem is I live in the... 02-09-2015, 01:51 PM
TheRecycler Well Mike, you have a valid... 02-09-2015, 02:08 PM
mikeinreco I'll pass being a big... 02-09-2015, 03:28 PM
Otto I've got some totes that are... 02-09-2015, 05:37 PM
mikeinreco Agreed if copper was my main... 02-09-2015, 05:48 PM
USMC1371 **** straight, can't be one... 02-14-2015, 06:07 PM
TheRecycler Thanks for the breakdown... 02-10-2015, 06:26 AM
hobo finds All us small time scrappers... 02-09-2015, 02:18 PM
Scrappah I tend to network with the... 02-09-2015, 02:26 PM
t00nces2 I was hanging on to brass... 02-09-2015, 03:02 PM
Patriot76 Storage is not a problem and... 02-09-2015, 03:29 PM
Victor All this talk of hoarding,... 02-09-2015, 04:18 PM
TheRecycler It's all a gamble through... 02-10-2015, 06:17 AM
Patriot76 In this debate you are quoted... 02-10-2015, 04:14 PM
taterjuice Which brings up a good point,... 02-15-2015, 09:19 PM
KzScrapper I do have a decent amount of... 02-09-2015, 05:17 PM
mikeinreco Agreed at this point scrap is... 02-09-2015, 05:22 PM
mikeinreco me likey mud 02-09-2015, 05:31 PM
1956 Well every one has there own... 02-09-2015, 06:13 PM
TheRecycler The guys and gals who are... 02-10-2015, 06:23 AM
unknownk If you knew what the price of... 02-09-2015, 07:52 PM
matador I take a pickup load of cases... 02-09-2015, 07:52 PM
Abuilder These times seem to be one of... 02-09-2015, 08:48 PM
TheRecycler Matador, I share your... 02-10-2015, 06:19 AM
travistemple202020 if your going to pay to sit... 02-10-2015, 04:06 AM
Mmarro89 The defining line between the... 02-10-2015, 10:44 AM
armygreywolf If anyone has decided to sit... 02-10-2015, 12:00 PM
junkfreak Couldn't say it better Army ,... 02-10-2015, 01:15 PM
armygreywolf I meant to say "It was free... 02-10-2015, 02:11 PM
Sirscrapalot No novel for me. The... 02-10-2015, 02:23 PM
mikeinreco still buying... 02-10-2015, 05:09 PM
pjost I'm hoarding. ... 02-10-2015, 11:29 PM
Rollyrogers33 I have been sitting on all my... 02-11-2015, 12:08 AM
TheRecycler It's a gamble and each and... 02-11-2015, 03:27 AM
armygreywolf Carbide is my LONG game. I... 02-11-2015, 01:18 AM
Mmarro89 For reuse components, there... 02-11-2015, 05:35 AM
KzScrapper When it comes to Carbide a... 02-11-2015, 05:49 AM
taterjuice wtf mick is gone ? When no... 02-15-2015, 09:32 PM
etack http://www.scrapmetalforum.com... 02-15-2015, 09:44 PM
TheRecycler I can't say I know the man... 02-17-2015, 09:25 AM
Kalvlin I don't stock pile anything... 02-11-2015, 01:23 PM
bigburtchino So far I do not buy anything,... 02-11-2015, 06:57 PM
TheRecycler Well said and with that, I... 02-13-2015, 03:14 AM
Copper Head Thats all well , but for many... 02-13-2015, 05:38 AM
TheRecycler Copperhead, I was simply... 02-15-2015, 03:41 AM
F350scrapper TheRecycler- Im with you Ive... 02-15-2015, 09:40 AM
TheRecycler F350, you freakin got it and... 02-15-2015, 03:30 PM
Scrappah You should do what you think... 02-27-2015, 04:12 PM
TheRecycler Scrappah, well said. In the... 02-28-2015, 02:19 PM
TheRecycler My copper pile and non... 02-27-2015, 03:18 PM
ChildhoodDream I read over this thread as I... 03-18-2015, 05:15 AM
TheRecycler There is a saying, "Out of... 04-01-2015, 11:57 PM
taterjuice I survived '08 and I'm pretty... 04-02-2015, 09:18 AM
TheRecycler Taterjuice that's the spirit.... 04-02-2015, 05:38 PM
junkfreak I like hoarding my copper and... 04-02-2015, 06:05 PM
TheRecycler I strongly agree. ... 04-02-2015, 08:41 PM
ChildhoodDream I plan on holding on to most... 04-03-2015, 04:50 AM
TheRecycler Sounds like you have a game... 04-05-2015, 05:54 PM
roger2010 How you getting rid of the... 04-05-2015, 08:32 PM
TheRecycler I don't take the tubes home.... 04-06-2015, 12:38 PM
  1. #10
    Scrappah is offline Metal Recycling Entrepreneur
    Scrappah's Avatar
    SMF Badges of Honor



    Member since
    Jun 2014
    Posts
    1,056
    Thanks
    318
    Thanked 1,416 Times in 674 Posts
    I tend to network with the local scrappers and the group consensus right now is that they're holding / hoarding till the price comes back up. Most of them have done it for at least fifteen or twenty years now. They know their stuff. The pattern has been that prices drop in the fall and come back up in the spring.

    That works as long as the economic landscape doesn't change.

    I think that most of us get the connection between energy prices ( fuel prices ) and scrap prices. When the cost of a gallon of gas goes up the prices they pay at the scrap yard go up. When the cost of gas drops scrap prices drop.

    See ... everything is interconnected. It's all about understanding how those connections work.

    The next step is to look into the future. It's all just guesswork. I don't have a crystal ball or anything but it looks to me like fuel prices are still dropping. What i'm looking for is for the price to hit bottom & stabilize. When that happens it's likely that scrap prices will stabilize too. (I don't know when that will happen.)

    It's all probabilities. You have to ask yourself ... " what's the most likely thing ?"



    Is it likely that gas will go back up to 3.80 $ a gallon anytime soon ? If it does, then copper might go back up over 3.00 $ a pound.

  2. The Following 2 Users say Thank You for This Post by Scrappah:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook