Results 1 to 20 of 60

Cardboard Scrapper 2016

| Scrap Metal Tips and Advice

Threaded View

StRegis Cardboard Scrapper 2016 03-09-2016, 07:36 AM
miked Welcome to the forum. It... 03-09-2016, 08:13 AM
ryanw I've always wondered about... 03-09-2016, 10:22 AM
StRegis Ryanw, I don't know what... 03-09-2016, 12:48 PM
MattInTheHat you can also squish the... 03-09-2016, 01:02 PM
StRegis Hi Mike, Thanks for the... 03-09-2016, 12:32 PM
TheDude80 Quick question for you Regis.... 03-09-2016, 05:36 PM
bigburtchino Prior to this year cardboard... 03-09-2016, 09:10 PM
StRegis Burtchino, I don't know... 03-10-2016, 06:43 AM
StRegis Dude80, I believe you are... 03-10-2016, 06:23 AM
bigburtchino We are using 40 yard roll... 03-10-2016, 01:58 PM
hobo finds bigburtchino are businesses... 03-10-2016, 05:08 PM
ryanw There is no deposit on... 03-10-2016, 05:39 PM
bigburtchino Hobo - As of June 29, 2012... 03-10-2016, 06:46 PM
TheDude80 Regis- Do you have containers... 03-10-2016, 06:59 PM
StRegis I just saw we made the topic... 03-11-2016, 06:51 AM
Ace How many just cardboard... 03-11-2016, 07:15 AM
gus4113 good hustle by you st... 03-11-2016, 09:11 AM
StRegis Hi Gus4113, If you are in... 03-11-2016, 01:12 PM
StRegis Ace, Sounds like you want... 03-11-2016, 02:51 PM
HipoGear I was searching for buyers in... 03-11-2016, 06:59 AM
bigburtchino StRegis Waste Management,... 03-11-2016, 09:50 AM
MattInTheHat Most likely gets put on one... 03-11-2016, 12:19 PM
ResourcefulRecycling Want to come to Michigan for... 03-12-2016, 06:11 AM
HipoGear Regis, so it sounds like you... 03-12-2016, 08:56 AM
gus4113 yes near a port helps...phily... 03-12-2016, 03:57 PM
StRegis I currently have a 24ft box... 03-13-2016, 09:08 AM
miked " The key is commitment and... 03-13-2016, 09:58 AM
ruben23 You made topic of the week... 03-15-2016, 06:07 PM
StRegis Thanks Ruben23, I hope to... 03-16-2016, 06:28 AM
andyheim I apologize if this was... 03-24-2016, 05:16 PM
StRegis Hi Andyheim, Rain is... 03-26-2016, 07:49 AM
APA Most scrap prices are down. ... 03-27-2016, 05:21 AM
StRegis Just a quick update from me: ... 04-21-2016, 09:17 AM
miked Yea yea yea, that age old... 04-21-2016, 11:43 AM
StRegis Thank you for your service... 04-21-2016, 06:28 PM
StRegis Just a quick update on my... 06-09-2016, 06:53 AM
StRegis Getting into the hot season... 07-09-2016, 05:12 PM
RagnBone Do you ever get a slight... 07-11-2016, 08:58 PM
billygoat That's why they make... 07-12-2016, 06:34 AM
webuyselltradestuff Unfortunately (well depending... 07-12-2016, 06:49 AM
harsas The trick is to pay them well... 07-13-2016, 04:51 PM
APA Higher scrap prices create... 07-09-2016, 07:41 PM
miked I do enjoy reading about how... 07-10-2016, 07:16 AM
HipoGear I used to work in electronic... 07-13-2016, 06:41 PM
StRegis Another update for Summer... 08-17-2016, 08:20 AM
StRegis Well, I thought I'd give my... 09-15-2016, 09:22 AM
Ace Anymore updates. Always... 10-03-2016, 12:46 PM
Repurposer I wish it would pay to haul... 10-03-2016, 01:30 PM
StRegis Well last month was probably... 10-20-2016, 04:57 PM
Repurposer There is one cardboard buyer... 10-22-2016, 03:23 PM
StRegis I thought I'd give one last... 12-10-2016, 08:00 PM
miked Thanks for the update and... 12-10-2016, 08:23 PM
Greener Thank you for the update, Ive... 12-11-2016, 09:21 PM
auction What kind of compression do... 12-22-2016, 09:29 PM
BumpRacerX Not to bump an old thread,... 10-02-2017, 01:12 PM
  1. #4
    StRegis started this thread.
    StRegis's Avatar
    SMF Badges of Honor

    Member since
    Mar 2016
    Location
    Philadelphia, PA
    Posts
    30
    Thanks
    3
    Thanked 86 Times in 23 Posts
    Ryanw,

    I don't know what to tell you but it seems pretty simple to me. If you want to find out if it's worth it to collect cardboard, go collect a load and sell it to your buyer. $60 per ton loose is a very good price. Surprisingly high, even though you are in CA where prices are higher. I would guess you get 1-2 tons in your trailer if you flatten them out. That's about $100 per haul to your buyer. Do that for a few months and you can save up for a used baler at about $8,000 and he might pay an extra $20 or $30 per ton for baled OCC. You just need to do the work. There's no short-cuts. I wish you luck.


  2. The Following 4 Users say Thank You for This Post by StRegis:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook