SMF Buyer Finder - Click an item below to find a Scrap Metal Forum buyer that buys what you're selling.

Results 1 to 18 of 18

We buy scrap copper wire!! Eastern PA

| Scrap Buyers & Sellers
  1. #1
    High Voltage Processing started this thread.
    High Voltage Processing's Avatar
    Last Online: 02-25-2013
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Allentown PA
    Posts
    316
    Thanks
    63
    Thanked 201 Times in 101 Posts

    We buy scrap copper wire!! Eastern PA

    As requested in my welcome thread, here is my current price list for copper wire. I have also included what the local scrap yards here are paying for comparison. All prices are per pound of course.

    Type Scrap Yard High Voltage Processing

    Romex, THHN: $1.57 $1.70



    Extention/Phone/Misc $1.30 $1.40

    Shiny Copper $3.50 $3.60

    Again my number is 484-860-9454 and if you have over 100 pounds I will pick up for free.
    Last edited by High Voltage Processing; 09-13-2011 at 03:05 PM.


  2. #2
    High Voltage Processing started this thread.
    High Voltage Processing's Avatar
    Last Online: 02-25-2013
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Allentown PA
    Posts
    316
    Thanks
    63
    Thanked 201 Times in 101 Posts

    New Price for limited time only!!!

    I am in need of Romex and THHN wire badly. I will buy as much as you can at higher then board prices. Right now, I will pay $1.75 for Romex and $2 for THHN.
    Send PMSend PM  

  3. #3
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    I will pay $1.75 for Romex and $2 for THHN.
    I know what Romex is but for us uneducated ones, what is THHN???

  4. #4
    SMF Badges of Honor


    Member since
    May 2011
    Location
    Dallas TX
    Posts
    1,979
    Thanks
    158
    Thanked 1,182 Times in 518 Posts
    Its a solid wire size being 12AWG used for building.

  5. #5
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    That's what I call Romex,
    Never mind, I'll WiKi it!
    Thermoplastic High Heat-resistant Nylon (THHN)
    That tells me the difference between that and regular old Romex,,, thanks
    Last edited by Mechanic688; 09-17-2011 at 09:20 PM.

  6. #6
    High Voltage Processing started this thread.
    High Voltage Processing's Avatar
    Last Online: 02-25-2013
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Allentown PA
    Posts
    316
    Thanks
    63
    Thanked 201 Times in 101 Posts
    Thank you for pointing that out. I have attached some images below. Basically, THHN is the wire that is inside the Romex outer shell coating. It is much easier for my machine to process so I will pay more for it then Romex. Also it will not have twine or paper coating thus making it easier to separate the copper from the plastic.
    Attached Images Attached Images    
    Send PMSend PM  

  7. #7
    High Voltage Processing started this thread.
    High Voltage Processing's Avatar
    Last Online: 02-25-2013
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Allentown PA
    Posts
    316
    Thanks
    63
    Thanked 201 Times in 101 Posts
    Updated price list!


    Bare Bright $2.90 Bare Bright Copper

    #1 CU $2.70 #1Copper shall consist of clean wire that is free of lead, paint
    *or solder (may contain tarnished or green copper)

    #2 CU wire $2.60 #2 copper Tin coated shall consist of copper wire and/or bussbar*

    LG $0.80 Low grade wire is all wire that are fine strands, tin coated,
    Extension Chords, etc

    TELCO $1.00 TELCO wire shall be free of tin coated wire and braided coax wire.*
    ( add .05-.15 cents if closer to the larger range)

    Alarm $1.16 Alarm wire shall be solid 16awg or greater
    *(Red wire) containing 2 or more solid conductors*

    ROMEX $1.38 ROMEX wire shall be #14 awg-#8awg ( add .10-20 cents if larger)

    THHN $1.56 THHN wire shall be #16awg-#8awg free of thick jacket insulation

    MED THHN $1.97 MEDIUM THHN wire shall be #6- 400 mcm*
    (add a .05-.15 cents if its closer to the larger range)

    Big THHN $2.25 BIG THHN wire shall be 500 mcm or greater*
    (add .05-.15 cents if closer to the larger range)*

    Med TIN-C $1.60 MEDIUM TIN COATED wire shall be #6-400mcm*
    (add .10-20 cents if closer to the larger range)

    Big TIN-C $1.86 BIG TIN COATED wire shall be 500 mcm or greater
    ( add .10-.20 cents if closer to the larger range)

    AL-BX $0.64 ALUMINUM BX Wire shall consist of aluminum casing and copper conductors*****
    Inside, free of tin coated wires (add.10-.20 cents if closer to the larger range)

    ST-BX $0.35 STEEL BX wire shall consist of steel casing and copper conductors inside,
    Tin coated conductors aloud*( pay only .10 cents if there is boxes in the mix)

    INS-AL $0.25 INSUATED ALUMINUM wire (pay.05-.10 cents more if closer to the larger range)

    BA $0.50 Bare Aluminum

    BRASS $1.20 BRASS shall consist of yellow or white brass free of steel fittings
    (pay .05 less if some steel* Use discretion) We only Buy only brass if*
    its from wire exuggs connectors etc.
    Send PMSend PM  

  8. #8
    High Voltage Processing started this thread.
    High Voltage Processing's Avatar
    Last Online: 02-25-2013
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Allentown PA
    Posts
    316
    Thanks
    63
    Thanked 201 Times in 101 Posts
    New Pricing


    Bare Bright $2.60 Bare Bright Copper

    #1 CU $2.52 #1Copper shall consist of clean wire that is free of lead, paint
    *or solder (may contain tarnished or green copper)

    #2 CU wire $2.42 #2 copper Tin coated shall consist of copper wire and/or bussbar*

    LG $0.62 Low grade wire is all wire that are fine strands, tin coated,
    Extension Chords, etc

    TELCO $0.82 TELCO wire shall be free of tin coated wire and braided coax wire.*
    ( add .05-.15 cents if closer to the larger range)

    Alarm $0.98 Alarm wire shall be solid 16awg or greater
    *(Red wire) containing 2 or more solid conductors*

    ROMEX $1.20 ROMEX wire shall be #14 awg-#8awg ( add .10-20 cents if larger)

    THHN $1.38 THHN wire shall be #16awg-#8awg free of thick jacket insulation

    MED THHN $1.79 MEDIUM THHN wire shall be #6- 400 mcm*
    (add a .05-.15 cents if its closer to the larger range)

    Big THHN $2.07 BIG THHN wire shall be 500 mcm or greater*
    (add .05-.15 cents if closer to the larger range)*

    Med TIN-C $1.42 MEDIUM TIN COATED wire shall be #6-400mcm*
    (add .10-20 cents if closer to the larger range)

    Big TIN-C $1.68 BIG TIN COATED wire shall be 500 mcm or greater
    ( add .10-.20 cents if closer to the larger range)

    AL-BX $0.46 ALUMINUM BX Wire shall consist of aluminum casing and copper conductors*****
    Inside, free of tin coated wires (add.10-.20 cents if closer to the larger range)

    ST-BX $0.17 STEEL BX wire shall consist of steel casing and copper conductors inside,
    Tin coated conductors aloud*( pay only .10 cents if there is boxes in the mix)

    INS-AL $0.07 INSUATED ALUMINUM wire (pay.05-.10 cents more if closer to the larger range)

    BA $0.32 Bare Aluminum

    BRASS $1.02 BRASS shall consist of yellow or white brass free of steel fittings
    (pay .05 less if some steel* Use discretion) We only Buy only brass if*
    its from wire exuggs connectors etc.
    Send PMSend PM  

  9. #9
    High Voltage Processing started this thread.
    High Voltage Processing's Avatar
    Last Online: 02-25-2013
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Allentown PA
    Posts
    316
    Thanks
    63
    Thanked 201 Times in 101 Posts
    Bare Bright $2.97 Bare Bright Copper

    #1 CU $2.77 #1Copper shall consist of clean wire that is free of lead, paint
    *or solder (may contain tarnished or green copper)

    #2 CU wire $2.67 #2 copper Tin coated shall consist of copper wire and/or bussbar*

    LG $0.87 Low grade wire is all wire that are fine strands, tin coated,
    Extension Chords, etc

    TELCO $1.07 TELCO wire shall be free of tin coated wire and braided coax wire.*
    ( add .05-.15 cents if closer to the larger range)

    Alarm $1.23 Alarm wire shall be solid 16awg or greater
    *(Red wire) containing 2 or more solid conductors*

    ROMEX $1.45 ROMEX wire shall be #14 awg-#8awg ( add .10-20 cents if larger)

    THHN $1.63 THHN wire shall be #16awg-#8awg free of thick jacket insulation

    MED THHN $2.04 MEDIUM THHN wire shall be #6- 400 mcm*
    (add a .05-.15 cents if its closer to the larger range)

    Big THHN $2.32 BIG THHN wire shall be 500 mcm or greater*
    (add .05-.15 cents if closer to the larger range)*

    Med TIN-C $1.67 MEDIUM TIN COATED wire shall be #6-400mcm*
    (add .10-20 cents if closer to the larger range)

    Big TIN-C $1.93 BIG TIN COATED wire shall be 500 mcm or greater
    ( add .10-.20 cents if closer to the larger range)

    AL-BX $0.71 ALUMINUM BX Wire shall consist of aluminum casing and copper conductors*****
    Inside, free of tin coated wires (add.10-.20 cents if closer to the larger range)

    ST-BX $0.42 STEEL BX wire shall consist of steel casing and copper conductors inside,
    Tin coated conductors aloud*( pay only .10 cents if there is boxes in the mix)

    INS-AL $0.32 INSUATED ALUMINUM wire (pay.05-.10 cents more if closer to the larger range)

    BA $0.57 Bare Aluminum

    BRASS $1.27 BRASS shall consist of yellow or white brass free of steel fittings
    (pay .05 less if some steel* Use discretion) We only Buy only brass if*
    its from wire exuggs connectors etc.
    Send PMSend PM  

  10. #10
    ScrapperStoke's Avatar
    SMF Badges of Honor

    Member since
    Oct 2011
    Location
    Hamilton, NJ
    Posts
    49
    Thanks
    35
    Thanked 8 Times in 6 Posts
    I take it TELCO would include twisted pair patch cable?

  11. #11
    High Voltage Processing started this thread.
    High Voltage Processing's Avatar
    Last Online: 02-25-2013
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Allentown PA
    Posts
    316
    Thanks
    63
    Thanked 201 Times in 101 Posts
    you are correct.
    Send PMSend PM  

  12. #12
    cgraz1187's Avatar
    SMF Badges of Honor

    Member since
    Nov 2011
    Location
    Scranton, PA
    Posts
    17
    Thanks
    0
    Thanked 26 Times in 10 Posts
    Are the prices posted above current?

  13. #13
    sjones99's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    iowa
    Posts
    266
    Thanks
    26
    Thanked 59 Times in 41 Posts
    i bet not

  14. #14
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Stroudsburg PA
    Posts
    25
    Thanks
    3
    Thanked 20 Times in 5 Posts
    Hey,
    High Voltage, I sent you a private message I'm not sure if you saw or not. Could you check it out and let me know what you can do for me? Thanks

  15. #15
    Dunemaul's Avatar
    SMF Badges of Honor



    Member since
    Nov 2011
    Location
    East Orlando FL
    Posts
    1,064
    Thanks
    157
    Thanked 560 Times in 301 Posts
    Jim could you update your price list. I need to check on logistics but i think i might start shipping my BB to you among other copper.

  16. The Following User Says Thank You to Dunemaul for This Post:


  17. #16
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,758
    Thanks
    6,037
    Thanked 5,910 Times in 2,556 Posts
    Are you still buying Cu wire? If so can we get some prices? Thanks!!

  18. #17
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,985
    Thanks
    1,257
    Thanked 5,023 Times in 2,351 Posts
    If I remember correctly this company went bankrupt

    http://www.freecourtdockets.com/dock...rt-docket.html

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook