Page 1 of 2 12 LastLast
Results 1 to 20 of 30

a little common business sence

| General - Let's talk business
  1. #1
    EcoSafe started this thread.
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts

    a little common business sence

    there is, as we know a lot orf noobs getting into the business, and as times get tougher ther will be many more. I hve seen this in other "quick cash" businesses, over my 50 + years humpin it. I have already seen the near future, on some of the government auction sites and here on this forum.
    junk cars selling for 500+ a palet of compiters selling for $150 and up This is caused in a large part by rhoumor among those in the biss. I dont know about most of you but, I cant buy a junk car for $500, go pick it up. strip it and cut it and make any profit. Most inexperienced noobs will do this some times for months on end not realising they are just treading water, turning the same money over and over, and working their butts off doing it. i know I have done it with Hot dog carts, food stands fruit stands and in the salvage business.
    I also know there are those of you astute enough, and business wise enough to know exactly what a washer, a car. a monitor , a computer will scrap for. i think it would benifit us all and the business to compile a guide list of the actual scrap value, of some of the most common items are. I know the metal prices fluctuate, but there has to be as way to come close. just my thoughts. mcw



  2. #2
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    I hear ya!

    I've been searching Craigslist for junk cars, but these clowns want too much for them. They include in the ad "Won't go lower than $500 (or whatever number they want) because I can scrap it for that".

    Bought a car for $100 and doubt I will make much on it.

  3. #3
    EcoSafe started this thread.
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    right now I would buy all I can get (if they are complete including cats) for $200, I can still make a min fo $100 with that but any thing more is just a tread mill.

    But Id rather get it free, or paid to haul it off. but si much for the old days.
    Last edited by EcoSafe; 06-02-2011 at 09:23 PM.

  4. #4
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Always good to be thinking ahead olddude. Since the dawn of man, anytime anything comes along that has value and is somewhat plentiful, the masses are going to try and get in on the action. From fire to salt or sugar, gold, oil...there's always going to be something that people think they can make a quick buck on. But many that try just don't cut the mustard and fail sooner or later and being the shrewd businessman that we all have to be sometimes, can grow stronger and bigger when they do. Capitalism works when governments let it.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  5. #5
    ComputerScrapper's Avatar
    SMF Badges of Honor


    Member since
    Mar 2011
    Location
    Portland, Indiana
    Posts
    497
    Thanks
    18
    Thanked 320 Times in 145 Posts
    I ran into the same thing yesterday...We went to buy a box truck that a guy had for sale....We were doing the negotiation and he said he would not go any lower because the scrap yard would give him so much....Long story short, the truck made it as far as the gas station before it broke down....I even called the scrap yard and they said that he would have to take all the wood and fiberglass out before they would even accept it. Luckily he gave my money back and I was able to wash my hands of the thing...But it is true, many people are thinking that their scrap is worth a fortune

  6. #6
    Kris Kringle
    I like it when I see junkers for sale and they say I can get $600 across the scales for it wont go no lower as soon as I see that Ad first thing I do is email them and ask where are they getting that kind of price for their junk because I have 5 I would like to sell. Funny thing no one ever responds back.

  7. The Following 3 Users say Thank You for This Post by Kris Kringle:


  8. #7
    Saroro's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    Apalachin, New York, United States
    Posts
    242
    Thanks
    72
    Thanked 71 Times in 44 Posts
    Quote Originally Posted by KZBell View Post
    Capitalism works when governments let it.
    Loud AMEN to that one!
    Faith x Needs = Motivation

  9. #8
    tjlock's Avatar
    SMF Badges of Honor



    Member since
    Sep 2010
    Location
    Central Illinois (Streator)
    Posts
    188
    Thanks
    9
    Thanked 37 Times in 20 Posts
    I find it funny that they say they can scrap it for $500. Most have real jobs so best of luck to them getting it broken down in a timely manner and would love to ask them if they thought it was worth it.

  10. #9
    dherik's Avatar
    SMF Badges of Honor


    Member since
    May 2011
    Location
    Des Moines, IA
    Posts
    305
    Thanks
    60
    Thanked 126 Times in 61 Posts
    The people who say I can scrap it for x amount, I walk away and tell them to call me when they're done living in la-la land.

    I went and looked at a pile of electronic scrap yesterday, gave the guy what I think is a generous offer. There was some newer stuff, but A LOT of crap that is going to take me a long time to clean up and scrap. He said I can haul it to the yard for that. After I told him, listen, you can haul it in there, but what about those 15 monitors? those cost 15 a pop to take anywhere in the area. All that cardboard, garbage, my offer includes clearing this entire building out, heck I'll even sweep it, and mop the floor if I have to.

    I tried to bite my tongue and not come across like I was calling him an idiot, but man it's hard sometimes.

  11. #10
    Kris Kringle
    Quote Originally Posted by dherik View Post
    He said I can haul it to the yard for that .
    See this is what I mean some of these Idiots don't value their time.

  12. #11
    SMF Badges of Honor


    Member since
    May 2011
    Location
    Dallas TX
    Posts
    1,979
    Thanks
    158
    Thanked 1,182 Times in 518 Posts
    Quote Originally Posted by dherik View Post
    The people who say I can scrap it for x amount, I walk away and tell them to call me when they're done living in la-la land.

    I went and looked at a pile of electronic scrap yesterday, gave the guy what I think is a generous offer. There was some newer stuff, but A LOT of crap that is going to take me a long time to clean up and scrap. He said I can haul it to the yard for that. After I told him, listen, you can haul it in there, but what about those 15 monitors? those cost 15 a pop to take anywhere in the area. All that cardboard, garbage, my offer includes clearing this entire building out, heck I'll even sweep it, and mop the floor if I have to.

    I tried to bite my tongue and not come across like I was calling him an idiot, but man it's hard sometimes.
    I just say here in my number give me a call if you want me to come out or not. Take care I have other pick ups I have to do and I cant stand around here all day. Good luck.

  13. #12
    SMF Badges of Honor



    Member since
    Jan 2011
    Posts
    1,159
    Thanks
    0
    Thanked 248 Times in 169 Posts
    LOl i buy cars for $500 all of the time.You just have to know what you are buying and not try to get rich off of every car.

  14. #13
    EcoSafe started this thread.
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    we are talkomg scrap cars here, how many u want for $500 and do you have a big hauler? say 8 cars per trip.

  15. #14
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Southwestern Pa
    Posts
    338
    Thanks
    27
    Thanked 176 Times in 102 Posts
    I'm in the process of getting rid of some stuff, that's pretty well used up, and in trying to sell it, my base line price has been determined by what I can get for it at the scrap yard, minus a few bucks for the effort it'd take me. (Cause I know that number, and I'm not going to sell it for less than that....)

    My 79 International dump truck went straight to the scrap yard, because the junkyards I talked to wouldn't offer me what simple mathematics said it was worth as scrap.

  16. #15
    dherik's Avatar
    SMF Badges of Honor


    Member since
    May 2011
    Location
    Des Moines, IA
    Posts
    305
    Thanks
    60
    Thanked 126 Times in 61 Posts
    The only cars I have ever bought for 500 or more were cars I knew going in had a title, already knew what the parts yard was paying for the car. Scrapping a car, i.e. taking it across the scales for the crusher or shredder, I can't think of anywhere that's going to pay over 500 for that.

    Now if you're taking a car, parting it out, pulling everything out, saving cores, and radiators, and cats, then taking it to the yard sure you might be able to scrape by buying a junker for 500 bucks.

  17. #16
    EcoSafe started this thread.
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    the only cars I ever bought for %500 or more were drivers, and I sold them for $1500 or more after a little touch up and elbo grease, but those days are pretty much gone. thanks to the clunker bill, the gov regs, gov produced economy etc.

    now if you own a parts yard that may be different, but you are still investing a lot of money and time, and lot space, for one car. I have never heard of a parts yard any where paying that kind of money for scrappers, with out having pre sold parts waiting on line.

    my original post was refering to back yard typical junkers. I have seen beautufull 57 chevys, and even a Super Bird rot to nothing in peoples back yards because the were nutzo on the price.
    Last edited by EcoSafe; 06-04-2011 at 01:16 PM.

  18. The Following User Says Thank You to EcoSafe for This Post:


  19. #17
    SMF Badges of Honor

    Member since
    Jun 2011
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    junk cars

    $5oo does seem to be the common price around here too. We get 245 a ton for cars no battery and you have to cut a hole in the gas tank. One place take them with everything. We get 275 pr ton on clean iron and 245 for dirty.

  20. #18
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    I've helped my kid part out a car then sent the shell to the yard and that's my only experience with scrapping cars. But my daily driver bought 6 months ago, 1996 ford E150, cost me $600...put some new tires on it a brake job up front and it's been making money ever since, can't imagine paying $500 for scrap.

  21. #19
    EcoSafe started this thread.
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    Quote Originally Posted by sjchord View Post
    $5oo does seem to be the common price around here too. We get 245 a ton for cars no battery and you have to cut a hole in the gas tank. One place take them with everything. We get 275 pr ton on clean iron and 245 for dirty.
    wow 275 a T for car bodies Im in the wrong part of the country. where are you. next queston any body got an 8 car hauler wanna go partners.

  22. #20
    Kris Kringle
    The only way I would pay $500-$600 for a car is if I could turn it for profit and Down here you make no money for scrapping it. Two weeks Ago I took in a 1992 Ford F-350 Crew Cab Dually the weight was 5980 Lbs I got $538.20. The cat was gone when i got it. The Rad was Aluminum I left it on. As a matter of fact I drove it off the trailer in the yard and had them weigh it. It had a 460 with Automatic I tried selling complete on Craigslist for $800 no takers I figured It was a Gas Hog is why no one wanted it. Like I said there is no way I will pay that much for a car or truck unless i know for a fact i can Flip it. Now there is people out here that will pay that much to use as Scrap But here is a little secret They wont last that long in the Business I figure I can wait them out.


  23. Similar threads on the Scrap Metal Forum

    1. Replies: 39
      Last Post: 07-17-2016, 08:21 PM
    2. Common Mistake?
      By MelRay in forum Dismantling, Breaking Down & Maximizing Scrap
      Replies: 15
      Last Post: 02-02-2012, 05:18 PM
    3. Board protocol and common courtesy.....
      By jfw1961 in forum Introduce yourself
      Replies: 10
      Last Post: 01-08-2012, 10:20 AM
    4. AWG of common ground wire
      By Mick in forum Scrap Metal Questions and Answers
      Replies: 6
      Last Post: 06-29-2011, 03:28 AM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook