Results 1 to 7 of 7

Huge pile of .30cal brass shell casings and M1 clips

| A Day in the Life of a Scrapper
  1. #1
    MilesPx4 started this thread.
    SMF Badges of Honor

    Member since
    Mar 2018
    Posts
    3
    Thanks
    0
    Thanked 3 Times in 2 Posts

    Huge pile of .30cal brass shell casings and M1 clips

    So I had some free time earlier today and decided to swing by an old power line outfall that is a popular dump site. It had been recently mowed so it didn’t look like there was much there, but I walked down a little ways just in case. And I happened to notice what looked like a few spent shell casings laying on the ground. As I was picking them up, I realized that it was actually a huge pile, mostly buried. Thousands of .45ACP and .30cal casings, and M1 Garand clips. They have obviously been there for a long time, and all of the steel clips are badly rusted. I haven’t finished cleaning and checking for live rounds yet, but so far it’s well over 100lbs of brass. They are quite tarnished, and most of them are partially crushed. Is there any reason you guys know of why a yard wouldn’t accept these? And the going rate seems to be around $1-2 per pound, I’m not sure what kind of price to expect, seeing as these shells are old. Uploading images seems to be disabled right now, but I’ll try again when I get to my laptop.
    Long time lurker, first time posting.
    Thanks,
    Miles


  2. The Following User Says Thank You to MilesPx4 for This Post:



  3. #2
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,758
    Thanks
    6,037
    Thanked 5,910 Times in 2,556 Posts
    Yards will buy them, you should call several yards for prices, some places pay a different price for brass shells than yellow brass
    Better than the dump!

  4. The Following User Says Thank You to hobo finds for This Post:


  5. #3
    HipoGear's Avatar
    SMF Badges of Honor


    Member since
    May 2015
    Location
    Rochester, NY
    Posts
    734
    Thanks
    2,048
    Thanked 945 Times in 409 Posts
    Nice find. Did you have to dig them up and clean them?
    Copper, brass, and Leather. 3 of my favorite things.

  6. #4
    MilesPx4 started this thread.
    SMF Badges of Honor

    Member since
    Mar 2018
    Posts
    3
    Thanks
    0
    Thanked 3 Times in 2 Posts
    For the most part, yes. I first noticed what looked like 20 or 30 shells laying in the dirt. I kicked the dirt over and found out that there were a lot more buried. I only had a couple of 5gal buckets and a 30 gallon trash can with me so I (carefully) filled them up, just in case of any other ordnance mixed in. I’d hate to hit an old grenade or mortar with a shovel lol! I put them all into bins and rinsed them with a hose. Dragged a magnet over them to get all of the clips and tossed them in the steel bucket. Only found a couple of live rounds. I ended up making a second trip and ran my metal detector around, filled all the buckets again. I’m pretty sure I got the majority of them, I may take one more look and try digging a little deeper. It’s not exactly “public” property, I’m sure it’s a utility easement. But i don’t see any harm in cleaning up what I’m sure is a source of lead contamination. There aren’t any “posted” or “no trespassing” signs and no locked gates.

  7. #5
    SMF Badges of Honor

    Member since
    Jul 2015
    Location
    Houston
    Posts
    28
    Thanks
    0
    Thanked 10 Times in 6 Posts
    Nice find. Be mindful of digging in utility easements---as there may be buried utilities or pipelines.
    Just a heads up if you haven't thought about it.

  8. The Following 2 Users say Thank You for This Post by cct001:


  9. #6
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    Quote Originally Posted by cct001 View Post
    Nice find. Be mindful of digging in utility easements---as there may be buried utilities or pipelines.
    Just a heads up if you haven't thought about it.
    Adding on to this:

    Digging on someone else's property without permission can lead to more problems than you are hoping for. It will not be because of the value of the brass it will be the liability to the owner of the property. Mike
    "Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}

    Now go beat the copper out of something, Miked

  10. The Following User Says Thank You to miked for This Post:


  11. #7
    MattInTheHat's Avatar
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    rock hill, sc
    Posts
    1,464
    Thanks
    1,142
    Thanked 1,396 Times in 703 Posts
    keep the shell separate from other brass. most yards want them separated even if its the same price
    Currently looking for a job in or related to scrap/recycling. Relocation is possible for the right offer.

  12. The Following User Says Thank You to MattInTheHat for This Post:



  13. Similar threads on the Scrap Metal Forum

    1. 19,000 lbs of shell casings.
      By wdaddy in forum General - Let's talk business
      Replies: 10
      Last Post: 02-27-2023, 08:46 PM
    2. Spent shell casings
      By brelea in forum Scrap Metal Tips and Advice
      Replies: 7
      Last Post: 11-07-2016, 05:37 PM
    3. Another MOTHER LOAD SHELL CASINGS
      By Connie28705 in forum Scrap Metal Questions and Answers
      Replies: 25
      Last Post: 04-14-2015, 01:07 AM
    4. Steel shell casings
      By dshrader in forum Scrap Metal Tips and Advice
      Replies: 12
      Last Post: 08-22-2014, 03:19 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook