Results 1 to 11 of 11

looking for a trailer hitch...

| Vehicle Recycling
  1. #1
    Gnraxlrose88 started this thread.
    SMF Badges of Honor


    Member since
    Aug 2011
    Location
    Green Bay, WI
    Posts
    377
    Thanks
    38
    Thanked 162 Times in 77 Posts

    looking for a trailer hitch...

    I know this is a long shot, but I gotta try.

    Im looking for a hitch for my car. Its a 1991 Honda Civic DX hatchback. I cant find a used one online, and dont really want to pay $130 for one...



    I have the perfect trailer sitting behind my garage...but no way to haul it...


  2. #2
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    I have several in new condition taken off my old scrapped equipment. I need the measurements at the rear of the frame, fro out side to out side. the distance from the bottom of the frame to where it will clear the bumper. (the drop) and the distance from where you will mount the frame to the tip of where the ball fits.

  3. The Following User Says Thank You to EcoSafe for This Post:


  4. #3
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    I've got a nice Reese hitch I'm trying to sell but how much would it cost to ship it to WI?

    About half way down the page: http://www.facebook.com/pages/Micks-...22913031140583
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  5. #4
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    Is $90 shipped to your door reasonable?


    http://www.ebay.com/itm/Hitch-NEW-CL...ht_22009wt_938

  6. #5
    Gnraxlrose88 started this thread.
    SMF Badges of Honor


    Member since
    Aug 2011
    Location
    Green Bay, WI
    Posts
    377
    Thanks
    38
    Thanked 162 Times in 77 Posts
    Olddude, ill check on the measurements, but from what ive seen it has to be class one.

    Mick, thats not the part i need lol...i have 10 receivers, i need the part that bolts to the car. Id grab the trailer frame from ya if i was closer...

    And idaho, i found one for like 85 on ebay with 35 shipping, but its in my area code so im thinking i may be able to pick it up. And im lookin for cheaper lol...if my auto bone yard up here had one i could get it for 20...but they dont have one lol

  7. #6
    GeorgeB's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Manassas Park, VA
    Posts
    2,919
    Thanks
    462
    Thanked 639 Times in 432 Posts
    Quote Originally Posted by Gnraxlrose88 View Post
    Olddude, ill check on the measurements, but from what ive seen it has to be class one.

    Mick, thats not the part i need lol...i have 10 receivers, i need the part that bolts to the car. Id grab the trailer frame from ya if i was closer...

    And idaho, i found one for like 85 on ebay with 35 shipping, but its in my area code so im thinking i may be able to pick it up. And im lookin for cheaper lol...if my auto bone yard up here had one i could get it for 20...but they dont have one lol
    Dont go for too cheap. Not all cheap things are good...just a few!
    George Beale - Founder & President - info@viprecyclingjunkremoval.com
    VIP Recycling Junk Removal LLC - Premier Scrap Metal, Junk, & Electronic Recyclers!
    http://www.viprecyclingjunkremoval.com

  8. #7
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    Class 1...gonna need a 1 1/4" stinger.


    Do you have a trailer plug or wiring leading to the rear? If not you'll need to figure out something there.

    How set are you on making this car a tow rig? Might be better to find a $500 beater truck that has a hitch and tow lights.

  9. #8
    CMHN's Avatar
    SMF Badges of Honor


    Member since
    Jul 2011
    Location
    Berwick, Pa
    Posts
    380
    Thanks
    49
    Thanked 339 Times in 111 Posts
    In my opinion, you get what you pay for when it comes to hitches. Remember, your safety, your families safety and the safety of the people on the road with you are riding on that trailer hitch. I have seen hitches break and trailers go flying across the road and wind up in the woods. Wouldn't want to be in the way of an out of control trailer.

    Now with that being said a class one hitch will handle 2,000 lbs gross trailer weight and 200 lbs tongue weight. I wouldn't pull 2,000 lbs with a Honda Civic, you will tear the transmission up on it and the brakes are not rated for that kind of weight. Once or twice probably wouldn't hurt it, but continuous use will tear that car apart.

    My suggestion is to look for a cheap truck, preferably full size. We can get them around here for under $1,500 and can handle the wear and tear scrapping puts on a vehicle. Use your Civic as a scout vehicle and use the truck for the heavy hauling.

    Good luck in what ever you decide.
    CMHN Recycling

  10. #9
    Gnraxlrose88 started this thread.
    SMF Badges of Honor


    Member since
    Aug 2011
    Location
    Green Bay, WI
    Posts
    377
    Thanks
    38
    Thanked 162 Times in 77 Posts
    Idaho, by stinger do you mean receiver? I have pleanty of those, and pleanty of different size balls. As for a plug in, no, i dont have a direct plug, but i have pleanty of witing harnesses that splice right into the cars harness, just cut, strip, crimp, and shazam!

    CM, i understand the concern. We had a big issue up here not too long ago, an idiot was pulling a trailer 75 mph down the highway with no chains. Trailer came off, went through the ditch, and into a girls car, killing her.

    Im not trying to pull a mobil home or anything. The trailer i have is the smallest street legal one you can get grom harbor freight. My brother brought it and some other stuff to my house when he got foreclosed on, and hasnt come back for it. He has a bigger trailer qnd a Tahoe, so this thing is useless to him.

    Honestly guys, I cant afford a 500 truck. The 500 i had got pulled from my account today to pay my rent, my internets past due, along with electric. I just want to be able to pick up a larger appliance here and there, and I always have access to a larger trailer and my parents suv, but i cant ask them for it everytime i want to pick something up. My neighbor has a utility trailer by our garage, and im always welcome to use it, but its homemade and over 40 mph pulls like crap.

  11. #10
    CMHN's Avatar
    SMF Badges of Honor


    Member since
    Jul 2011
    Location
    Berwick, Pa
    Posts
    380
    Thanks
    49
    Thanked 339 Times in 111 Posts
    I can understand where your coming from. As long as you understand the risks of using your car to pull the trailer then go for it.

    Contact your local U-Haul company and see how much their hitches are, they can install them along with the light kits.

    You can also go to Wal-Mart and get them reasonably priced, install it yourself.

    Try putting a wanted ad on Craigs List for one, you may find one.

    Looks like a few guys on here had some, so hopefully one of them would work for you.

    I know that new prices may seem like a little much, especially when every penny is accounted for with bills, but save up for it. Put a percentage of your scrap money up until you can afford one. The piece of mind alone knowing that you have a quality piece of equipment is worth the extra money. Sounds like after you get one you will have the ability to take more scrap in at one time, which will mean more money, so the investment is well worth it.

    Good luck

  12. #11
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    Heck if you know how to weld just build one yourself. I put one on the back of my 5th wheel to tow my boat behind it. I made it from 2x4 1/8th thick steel channel. Seems to work very well.


  13. Similar threads on the Scrap Metal Forum

    1. Trailer Brand names. Looking for a Tandem Axle trailer for Scrapping.
      By Kochy in forum Scrap Metal Tips and Advice
      Replies: 14
      Last Post: 08-25-2014, 11:40 PM
    2. last week trailer stollen this week new trailer for free
      By mrvictor1 in forum A Day in the Life of a Scrapper
      Replies: 8
      Last Post: 05-16-2013, 02:34 PM
    3. Replies: 11
      Last Post: 08-23-2012, 11:19 AM
    4. Trailer ??
      By thortek in forum Tools and Equipment
      Replies: 31
      Last Post: 05-04-2012, 09:33 PM
    5. Determining hitch rating
      By tackleberry in forum Tools and Equipment
      Replies: 12
      Last Post: 04-27-2012, 08:52 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook