what should I use?

**nyjetsfanx93** · 03-08-2011, 08:19 PM

I found a crumpled up swingset in the woods and the pieces are to big to take apart by unbolting the pieces.. I have an SUV so my space is limited... Any ideas on how to cut this up quickly and easily in the field?? I have a 18.6V Sawzall but it doesnt work all that great or all that long sadly....

**ComputerScrapper** · 03-08-2011, 08:45 PM

Grinder with a cutoff wheel maybe?

**Scrap man** · 03-08-2011, 08:52 PM

Grinder? Hacksaw? A torch would work best. Is it steel or aluminum?

**Mick** · 03-08-2011, 08:53 PM

Hack Saw..

**Scrap man** · 03-08-2011, 08:56 PM

Originally Posted by Mick

Hack Saw..

What's wrong with a hacksaw? I use one all the time. Sure, it's primitive, but it works

**ComputerScrapper** · 03-08-2011, 09:01 PM

well darn I did not even think about a hack saw but that would work if you don't mind a little bit of elbow grease.

**Mick** · 03-08-2011, 09:30 PM

Originally Posted by Scrap man

What's wrong with a hacksaw? I use one all the time. Sure, it's primitive, but it works

Nothing. I was typing my response at the same time as you. Had to put two "periods" to make the reply enough characters to post.

**nyjetsfanx93** · 03-09-2011, 12:00 AM

a Hacksaw would work... Im just looking to do it quickly.. I try not to spend too much time in one area when I'm salvaging from the woods or tracks.. I'm not sure what the laws are around here in regards to taking stuff that is dumped in the woods or by the railroad tracks... Morally there is nothing wrong with picking up trash but all it will take is one overzealous town cop who is all about the town ordinances and codes etc. to ruin my day...

**IdahoScrapper** · 03-09-2011, 12:16 AM

I'm sure you'll spend more to buy these items than you'll get in return on the swingset, but then you would have them for the future.

Get an inverter, extension cord, grinder and a few cutoff wheels. Or if you know someone that has an inverter, or even a small generator.

I've had awesome success with the Harbor Freight grinders...no idea if their inverters are worth a sh*t though.

**TJMETALRECYCLERS** · 03-09-2011, 07:42 AM

On large scale jobs, I will rent a generator when "out in the woods" and use my grinder or sawzall. Of course, I don't believe you will make enough on a swingset to offset your investment.
The advice to buy an inverter sounds good too!
Good Luck!!

**nyjetsfanx93** · 03-09-2011, 08:37 AM

Exactly... Not worth investing to get in there to get it truthfully... I prefer quick and easy... I have some pipe cutters that I carry in case I find really long pipes that I can cut up.. There is plenty of woods with plenty of stuff that i dont have to cut around here so that makes it nice and easy

**Beakersloco** · 03-31-2011, 07:53 PM

Like others have said the pay out will not be worth it for that item but I tend to look at tool expenses as if I will be able to use the tool again. Also if you have never used the tool before this may be the job to try it out on. Cheap inverter and extension cord may be enough for you to make a few cuts. If you dont want to spend any money they I would say to use the hacksaw and battery powered saw combo.

If you have a roof rack and the items are not too heavy consider butting them on the roof and just use some bungees to hold it so you can get out of the area or long enough to get it home so you can cut it up smaller there. I am about the same as you and I dont like to stay in the area long either.