Page 1 of 2 12 LastLast
Results 1 to 20 of 29

Next Truck: A Suburban?

| Tools and Equipment
  1. #1
    matador started this thread.
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,200 Times in 1,448 Posts

    Next Truck: A Suburban?

    I'm sure this has been posted before, but I can't seem to find anything, so:



    I am looking for an E-Waste vehicle. We do pickups. Our area is very large- a run can have us going up to 150 miles- each way. We need something that can hold some monitors, computer towers, and the like. We'd like for it to be able to tow our trailer to collection events. Our truck has to be enclosed. I've run stake trucks before, and always lose stuff to weather at some point.

    I buy vehicles from a man who fixes up salvaged and broken vehicles. I''ve bought from him twice, and trust him. We've known him for years. He always seems to hae a Suburban- and they're always cheap. He mostly does the '90s ones.

    My questions:

    1. How much computer room is there? We only need the front two seats to be usable. We use a short bed Ford currently. How would the space available compare?

    2. How much weight can one haul inside? His almost always have the 350, and are 1/2 ton. Most, but not all, are 4x4. How much weight can we cram inside, and still be able to drive home?

    3. How do they tow? I have two trailers- a 16' car hauler, and the back half of a GMC. The pickup trailer weighs 2500# tops if loaded. We'd like to be able to tow 5000# total with the 16' trailer if need-be (Including trailer weight). Can a Suburban do this? My F150 couldn't keep anything over 35 MPH with that load. Would the Suburban handle it well enough if we were in a pinch?

    4. What should I look for, or avoid? Any good years, or bad years? Any combination I want (other than a Suburban 2500- I wish!)

    What are your thoughts?


  2. #2
    SMF Badges of Honor



    Member since
    Jan 2011
    Posts
    1,159
    Thanks
    0
    Thanked 248 Times in 169 Posts
    i would get a 3/4 ton one and i would also look at the excursions from ford.

  3. #3
    ThatTubaDude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2014
    Posts
    69
    Thanks
    4
    Thanked 68 Times in 31 Posts

    Next Truck: A Suburban?

    My family has always had a 03 suburban with the 5.3 just passed 170k. It is really nice to have the stacking room. Have not put in any computers but have never had an issue with packing as long as you know how to. With the 03s, the middle bench seat folds down so that the back is completly flat once the third seat is out. We pull about 4k #s cars with a trailer thats probably 1k #s and have never had an issue. Upgrades i would suggest for the burban would be placing metal sheets behind the rear window incase of load shift and to prevent a computer through the window. (basically like a panel wagon my dad was going to put some in when he was dj ing), and then load helper bags never hurt. We have packed the burban with 8 people, clothes for 4 days (times eight people) and a full size cooler. Then took a trip from the France Germany border to Italy and back. Without issue and a surprising amount of space. If I ever get lots of smalls at auction, first thing i do is load up my pickup and call the burban to get the boxes that could fall out of my pickup bed. Overall i give the suburban a triple thumbs up!!!

    ThatTubaDude- Wrote this while sitting in the suburban on the way to the lake with 6 people and lots of stuff for his dads Air Force retirement.
    Last edited by ThatTubaDude; 08-29-2014 at 01:21 PM.

  4. #4
    matador started this thread.
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,200 Times in 1,448 Posts
    @ThatTubaDude:

    Is yours the Suburban 1500 or the 2500?

    Does anybody know if the 2nd row seats fold flat (or close to) in the 1992-1999 ones?

    -------

    I'd love a 3/4 ton Suburban- if he can find one to fix. Out here, the 2500 Suburbans are pricey and hard to find- and Excursions are almost impossible to locate. But, if I find one in budget, I'm on it!

  5. #5
    ThatTubaDude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2014
    Posts
    69
    Thanks
    4
    Thanked 68 Times in 31 Posts

    Next Truck: A Suburban?

    I don't know on the older gen if the middle seats fold down but ours is the 1500 2 wheel drive, stock height. ( no helper bags yet, they are supposed to arrive in the mail this week)

    *edit- On the capacity, we are able to put in a 4x8 flooring sheet angled in with out an issue.
    Last edited by ThatTubaDude; 08-29-2014 at 01:41 PM.

  6. The Following User Says Thank You to ThatTubaDude for This Post:


  7. #6
    matador started this thread.
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,200 Times in 1,448 Posts
    If you don't mind me asking, how was the sheet angled? Was it too long for the cargo space, or too wide for the wheelwells?
    Last edited by matador; 08-29-2014 at 02:00 PM.

  8. #7
    ThatTubaDude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2014
    Posts
    69
    Thanks
    4
    Thanked 68 Times in 31 Posts

    Next Truck: A Suburban?

    It was angled up over the 3rd and middle seat to against the driver/passenger head rests. It was just a couple inches long from what i remember

    Being able to fit the sheet, and have the seats fold flat are some of the main reasons why they have not gotten a newer body style burban because the new ones, we cant fit plywood in or fold the captains seats down flat.
    Last edited by ThatTubaDude; 08-29-2014 at 02:06 PM.

  9. #8
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    might be better off with a earlier mini van or a 2 seater pickup . you are talking mid to long trips fuel will soon hit $4+. Suburbans are notorious gas hogs. a mini van will pull a trailer and would be much easier to load. moving stuff around in a suv is a back breaker. A 2 seater pick up is the optimum choice if your escrap is scrap quality not resale. Ford 300 6 150 will pull anything you get weather you like Fords or not. If you get a lot of resale go with the van. just my .02
    "anyone who thinks scrappin is easy money ain't doin it right!"

  10. The Following 2 Users say Thank You for This Post by EcoSafe:


  11. #9
    beardo's Avatar
    SMF Badges of Honor



    Member since
    Mar 2013
    Location
    NE South Dakota
    Posts
    220
    Thanks
    56
    Thanked 386 Times in 147 Posts

    Next Truck: A Suburban?

    I have a 96 suburban its a 1500 but has the tow package with a bigger tranny cooler. They are great vehicles and should serve you well. However my seats do not fold down perfectly flat and the towing would depend a lot on the weight.

    I drive semis and its hard to consider any stock half ton a great towing vehicle. If we are talking a small 12 ft trailer with waste in it you should be fine. I would recommend adding heavier shocks, leafs in the rear and a leveling kit. it inexpensive your suburban guy should know how to do it and it makes a world of difference. It takes all the bounce and sway out of the suburban and takes away that pushing feeling from the trailer.
    "And if your train's on time, You can get to work by nine, and start your slaving job to get your pay. If you ever get annoyed, Look at me I'm self-employed
    I love to work at nothing all day" -BTO

  12. #10
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,781 Times in 3,853 Posts
    Speaking as one who uses a mini-van, I second what Olddude posted.

    Only way I'd go to a truck is if I was focusing on just scrap metal. For ewaste I love my mini-van. Can hold a bunch, I can remove the seats, decent gas mileage. I also use it to haul metal to the yard.

    If you got your heat set on the big truck, I can dig it. If your open to other vehicles tho, I highly suggest a mini-van or other type of Van. I think KZ uses one also..a van that is.

    Sirscrapalot - Over an out.

  13. #11
    matador started this thread.
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,200 Times in 1,448 Posts
    A minivan is too small. We use one of these for small pickups. For anything 700# and under, it's great! 28 MPG, has all the amenities, and has quattro to boot!


    Now, an Astro van or a "Maxi-Van"? I don't know much about them. We need something bigger than a Caravan, though. I currently run an F150 with a 300 I6/M5OD/3.31 gears. It's terrible. 5000# with trailer, and I could only keep 35 MPH on the flats- and I felt like a whipping boy doing that. 200 miles of that isn't doable. We will also be using this for farm work- hauling straw on trailers. Our loads are 5000# tops- and the F150 won't be doing that again! I don't anticipate that much weight very often, though. When we tow, it'll be around 3000-4000# usually (if that much). I do collection events all over the state- I can't see a Grand Voyager doing that

    We need enclosed trucking. My goal is resale- I scrap the obsolete and dead stuff. I can make more on a refurbished system, so I do that whenever possible.

    I've owned three half ton trucks. The only way they work for me is with a cap. I've lost computers before to rain in the open trucks. I'm tired of worrying about outrunning the storm, or losing stuff.

    ----------------------
    @Beardo: How do you think a Suburban would handle 5000# of towing? Could I hold 55 on the flats, or would I be doing 30, hoping I don't kill the truck? How do you think one would do with cargo in the back- say 700#? 1000#? 1500#?

    Suspension won't be an issue. I know he can do that. I did shocks on the Ford- they're the easiest thing I've ever done.

    -----------------------
    His pricing seems cheap for out here: last time, he had a 1999 4x4 with 180k miles. He was looking for $1500 out of it. His pricing is low. Heck, I missed out on a 2001 Dodge 2500 with the V10 for $1700.

    Please keep the thoughts coming!
    Last edited by matador; 08-29-2014 at 06:36 PM.

  14. The Following 2 Users say Thank You for This Post by matador:


  15. #12
    beardo's Avatar
    SMF Badges of Honor



    Member since
    Mar 2013
    Location
    NE South Dakota
    Posts
    220
    Thanks
    56
    Thanked 386 Times in 147 Posts

    Next Truck: A Suburban?

    I would think on the flats you should be fine. I'm always more worried about stopping than going.

    It may be one of those things where you are just going to have to see. The suspension upgrades are easy and the truck can pull the weight so you mag just have to do it in steps and see how it goes.

  16. #13
    matador started this thread.
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,200 Times in 1,448 Posts
    Do you think a brake controller for our 16' car hauler trailer and new pads would be a safe combo for that type of weight?

    Thanks for the tips!

  17. The Following User Says Thank You to matador for This Post:


  18. #14
    SMF Badges of Honor




    Member since
    Mar 2012
    Location
    ks
    Posts
    2,187
    Thanks
    2,513
    Thanked 2,140 Times in 898 Posts
    A suburban would be ok but with a 150 one way trip I'd look at a smaller pickup with a topper and a enclosed trailer.
    Alvord iron and salvage
    3rd generation scrapper and dam proud of it

  19. The Following 2 Users say Thank You for This Post by taterjuice:


  20. #15
    matador started this thread.
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,200 Times in 1,448 Posts
    @Taterjuice: I'm fine with smaller- if it can do the job. What are you thinking? Dodge Dakota?

    I'd be open to one. I owned a 1992, but never towed with it. Could one handle 5000# of trailer?

  21. The Following User Says Thank You to matador for This Post:


  22. #16
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    Currently using a 2001 E250 Ford van, 3/4 ton, its great for pick ups. I had 200 plus towers on it and another 500lbs of wire. It was overloaded to say the least but handled it. I would prefer and may get a good trailer to fill with my empty pc cases and other misc. shred. My van will be able to pull the load and this will be easier than getting the shred out of the van. Mike
    "Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}

    Now go beat the copper out of something, Miked

  23. The Following User Says Thank You to miked for This Post:


  24. #17
    Jonniebrass's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    Massachusetts
    Posts
    1,007
    Thanks
    582
    Thanked 496 Times in 296 Posts
    I would go with a full size van as Mike d stated, 3/4 ton. A van maybe challenging in winter conditions. You may want to look into a box type van , you would gain headroom but loose side doors. A box van makes a nice traveling billboard. Your milage may vary.
    Google first ask questions later!

  25. #18
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,781 Times in 3,853 Posts
    You keep pushing the station wagon an I'll keep my mini-van. I have plenty of room. An have hauled everything I've taken to the yard in it. Just got a washer, a dryer, a fridge, a propane grill, an several other items in on a pick up. An I still had room to stuff everything else. I can fit a bunch of tv's in before the weight becomes an issue. Plus they like to fly around if I don't have other things in it.

    So..you'll forgive me if I stick with what has obviously worked for me. My seats come out yours just fold right on down. Oh I can also pull a trailer if I ever decided to, an I have a higher floor to roof clearance. An no pesky doors to get in my way as mine slide all the way open. TV's? No trouble through the side. Fridges..no problem through the back door, washers/dryers loaded either way. An towers? I could haul them like one of these big trucks do an no worries on losing my load, or dealing with straps an tarps an all that jazz.

    Either way it all comes down to what you prefer. I don't have to worry about city driving or traffic. My sandbar is only a 120 miles or so, an I only putt around half of it on a regular basis. Far as mileage goes..I get something like 18 city an 23-25 hwy. Not the best, but certainly not the worse.

    Didn't mean to hijack your thread. Was just pointing out what olddude was saying about a mini-van being able to work if you didn't want a gas guzzler like a Suburban. Being as I actually use one, figure the voice of one experienced with it should speak on it's benefits.

    YVMV

    Sirscrapalot - Your Vehicle May Vary.
    Last edited by Sirscrapalot; 08-29-2014 at 10:14 PM. Reason: typos o'my

  26. #19
    Metalbestos's Avatar
    SMF Badges of Honor
    Buying ewaste and vintage video games

    Member since
    Mar 2014
    Location
    Baltimore md.
    Posts
    987
    Thanks
    3,114
    Thanked 1,658 Times in 707 Posts
    Great question . See I always want something different . Ya know one of those whoa what's that mobiles . My plan is to get a ford club wagon . He long window vans . Remove the back two seats and have my friend slide the rear up to make it so it has 2 rows enclosed and then either make sides or just have a flat bed on the back . I know a few auto body guys and they say it can be done .
    My mechanic said it would be worth doing to eliminate the need of a trailer . But my next vehicle will be another ford either way .

    I would recommend a van or pick up over a box truck . They are considered commercial vehicles in my state . But my main reason to avoid a box truck would be gas mileage. THe ford vans come in 6 and 8 cylinder . Box trucks prob get the same mpg as my old bronco lol god that was a gas pig !

  27. The Following User Says Thank You to Metalbestos for This Post:


  28. #20
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,781 Times in 3,853 Posts
    I love the ability to remove seats or add them in if needed. I rarely have the seats in unless it's for towers, then I'll put in the first bench, an stack around it if need be. Even then I rarely put the seats in. I've had them in for the last two weeks due to having our Niece down spending a week with us. This last week I've just not removed it. Going to do it in the morning tho as i need to hit the yard, the metal pile is getting in my way for some other projects so time to cash it in.

    I think I'd go with a larger van tho next time. I have no desire for a truck, lest not for scrapping. Just not an expense I feel like taking on at the moment. When I do get a truck it will be used for riding on the beach by me or up in the 4 wd area at the north end. The only scrapping it would see is from the small town Carova which is in the 4wd area I just mentioned.

    Either way tho like I said above you gotta go with what best fits you an your company. I can get by with my van, but i know it won't work for everyone.

    Good luck with what ever you decide to do..an remember the pictures when you do get it.

    Sirscrapalot - Thundercats hooooO!


  29. Similar threads on the Scrap Metal Forum

    1. To buy a truck or not buy a truck, that is the question.
      By dshrader in forum Scrap Metal Tips and Advice
      Replies: 17
      Last Post: 04-09-2014, 11:09 AM
    2. large truck vs small truck?
      By jennija in forum Scrap Metal Tips and Advice
      Replies: 18
      Last Post: 01-26-2014, 06:00 PM
    3. I don't have a truck :/
      By HeartSpasms in forum Tools and Equipment
      Replies: 35
      Last Post: 08-21-2013, 11:29 PM
    4. New from suburban Detroit
      By chrisb248 in forum Introduce yourself
      Replies: 7
      Last Post: 10-07-2012, 04:34 PM
    5. Sundays project parting out 85 suburban
      By taterjuice in forum A Day in the Life of a Scrapper
      Replies: 13
      Last Post: 07-10-2012, 08:02 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 6 users browsing this thread. (0 members and 6 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook