Page 2 of 4 FirstFirst 1234 LastLast
Results 21 to 40 of 62

Tandem axle trailer with no title - Page 2

| Tools and Equipment
  1. #21
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    Quote Originally Posted by NoMoreScrapLeft View Post
    That's some of the worst advice I've seen on here.
    lol. I've seen worse on here.




    I take it there was no license plate when you acquired it?


  2. #22
    NoMoreScrapLeft started this thread.
    SMF Badges of Honor


    Member since
    Jan 2012
    Posts
    76
    Thanks
    15
    Thanked 46 Times in 19 Posts
    Well if you read the posts I said "I" could not find a VIN. That doesn't mean there isn't one. That's why I asked the forum.

    As to...
    As far as worst advive....don't ask questions you don't want the answer to
    tampering with a VIN is a crime. So you're answer was the wrong answer. Do you suggest I go steal some copper of the phone pole too?

  3. #23
    NoMoreScrapLeft started this thread.
    SMF Badges of Honor


    Member since
    Jan 2012
    Posts
    76
    Thanks
    15
    Thanked 46 Times in 19 Posts
    No plates were on it. The VIN tag was removed or broke off somewhere down the line as I can see the rivits where it went on the tounge. The guy i traded for it traded from a guy who traded for it and so on....

  4. #24
    NoMoreScrapLeft started this thread.
    SMF Badges of Honor


    Member since
    Jan 2012
    Posts
    76
    Thanks
    15
    Thanked 46 Times in 19 Posts
    it was old and rusty when i got it. I painted it, redid the lights and deck

    http://i1111.photobucket.com/albums/...s/HPIM1467.jpg
    Last edited by NoMoreScrapLeft; 01-07-2012 at 01:10 AM.

  5. #25
    NoMoreScrapLeft started this thread.
    SMF Badges of Honor


    Member since
    Jan 2012
    Posts
    76
    Thanks
    15
    Thanked 46 Times in 19 Posts
    Idaho you seem smart. if you look at the pic there is a red wire hanging from the tounge. it runs to the wheel hub. I know this is the trailer brake but what is that wire hook to on the tounge? Is it missing something..battery?

  6. #26
    SMF Badges of Honor


    Member since
    Nov 2011
    Location
    boise, ID
    Posts
    1,605
    Thanks
    469
    Thanked 1,462 Times in 668 Posts
    It should go into the pigtail. Do you have a brake controller in your rig?

  7. The Following User Says Thank You to freonjoe for This Post:


  8. #27
    NoMoreScrapLeft started this thread.
    SMF Badges of Honor


    Member since
    Jan 2012
    Posts
    76
    Thanks
    15
    Thanked 46 Times in 19 Posts
    so i need to swap out the 4 flat plug?

  9. #28
    SMF Badges of Honor


    Member since
    Nov 2011
    Location
    boise, ID
    Posts
    1,605
    Thanks
    469
    Thanked 1,462 Times in 668 Posts
    Flat 4 plugs are for non-brake applications only. You'll need to change it to either a 5 or 7 prong plug.

  10. #29
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    If that's the brake wire it should be up in the plugin cause the trucks set up properly will have a brake controller. Mine was automatic but I could reach down and grab the handle and manually apply them. I've also seen a wire mounted on the tongue for a ground wire cause if you grease your hitch ball you may lose ground.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  11. #30
    NoMoreScrapLeft started this thread.
    SMF Badges of Honor


    Member since
    Jan 2012
    Posts
    76
    Thanks
    15
    Thanked 46 Times in 19 Posts
    I traded a 12x6 single axel and $200 cash for it. Spent $75 on the paint, $30 on the lights, $75 on the decking, made new ramps and bought a $349 7,000 lbs winch from harbor freight. I'm going to be really pissed if I can't register it or if some actually still ownes it

  12. #31
    NoMoreScrapLeft started this thread.
    SMF Badges of Honor


    Member since
    Jan 2012
    Posts
    76
    Thanks
    15
    Thanked 46 Times in 19 Posts
    well i was going to have the controller installed on monday so I was wondering if i was missing or needed something else mounted for them on the trailer. Now i'm thinking I shouldn't spend anymore money until I know for sure i'm the owner of the trailer

  13. #32
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    What kind of plugin do you have on it? On the campers I hauled they all had an 8 pin round plug, about the size of a silver dollar. That way there was plenty of plugs for all the different lights and brakes.

  14. #33
    SMF Badges of Honor


    Member since
    Nov 2011
    Location
    Milwaukee Wisc.
    Posts
    71
    Thanks
    35
    Thanked 44 Times in 22 Posts
    As I read your original thread and your subsequent replies it seems quite obvious that you believe that it is in fact a stolen trailer, and/or you believe that the chances are good that it's a stolen / hot piece of equipment.

    By the very nature of your responses and the further questions you are asking, it appears that you may have come onto the Forum for the soul purpose of obtaining information to help you hide the fact's and history of this trailer.

    I would hate to think that the forum is being used as a clearing house and information hot-line for stolen items ?...... Scrapping is a tough industry to begin with, and there are a lot of very good hard working , legit businesses and individuals who struggle to show and maintain a good public image throughout this industry.

    Now I pose this question in response to your thread: What happens when people read this thread and the responses that were given. They discover a person who is openly looking for a way to hide the fact that he or she is most likely in possession of stolen property. Made even more shocking is when they read that other members are replying and suggesting ways to help hide the stolen property, or possibly stolen property.

    “Just another black-eye to the scrapping / recycling industry”

    I understand that my reply may not be very popular , and please understand that I mean no disrespect to any other member or non-member that may read this. That being said, I will say that this is my opinion and thoughts on this matter.

    Sincerely,
    GreenTruckR

  15. The Following 4 Users say Thank You for This Post by GreenTruckR:


  16. #34
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    Quote Originally Posted by NoMoreScrapLeft View Post
    Idaho you seem smart. if you look at the pic there is a red wire hanging from the tounge. it runs to the wheel hub. I know this is the trailer brake but what is that wire hook to on the tounge? Is it missing something..battery?
    Yes, that would be wired into the trailer plug as others have mentioned. If you were to wire that directly to a battery it would lock up your brakes. A brake controller controls the amount of voltage applied to the brakes as the truck is braking.

  17. #35
    NoMoreScrapLeft started this thread.
    SMF Badges of Honor


    Member since
    Jan 2012
    Posts
    76
    Thanks
    15
    Thanked 46 Times in 19 Posts
    By the very nature of your responses and the further questions you are asking, it appears that you may have come onto the Forum for the soul purpose of obtaining information to help you hide the fact's and history of this trailer.
    No GreenTruckR you're WRONG! By not being able to locate the VIN does make we wonder if it may be stolen. I'm trying to locate the VIN so I can call the DMV to check the possability of it being so. In no way am I trying to hide my concerns. I will have an officer come out and check for a VIN. You don't know what you're talking about as I mention in this tread that is was BAD advice when it was suggest i'd grind the VIN# off. That is not an option. See i've know of people who have bought cars without a title from the lawful owner and when they filed for a lost title the old owner claimed they still owned it. Thus getting it back for free and screwing the buyer out of it. When you file for a lost title the DMV sends a certified letter to the last known owner on record. The trailer has been traded off atleast 5 times that I know of. When the DMV sends him a letter he may claim he still owns it even though he sold it 5 people back. I would get screwed and he would get a trailer that he sold long ago back for free.

  18. #36
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    How is he attempting to conceal that it may be stolen?

    He asked about where a VIN could be located on the trailer. He criticized a suggestion to hide any stamps/stickers, stating to do such is a crime.

    He wants to get it titled so he can register it and use it.

    Hardly sounds like someone trying to get one over on anyone. But maybe he is slick. Time will tell.

    If anything, he should have figured all of this out before he put a ton of work into it. BTW NoMoreScrapLeft, the trailer looks good.

  19. The Following User Says Thank You to IdahoScrapper for This Post:


  20. #37
    NoMoreScrapLeft started this thread.
    SMF Badges of Honor


    Member since
    Jan 2012
    Posts
    76
    Thanks
    15
    Thanked 46 Times in 19 Posts
    Idaho...I tried to trace down the paperwork but having went through so many people I wasn't able to find it. I started doing the work to it because the day I get it plated it's getting put to work. call me stupid but I was staying positive about it as I know the friend I got it from traded for it from another friend. Both of these guys are honest hard working people. The people before that GOD only knows

  21. #38
    NoMoreScrapLeft started this thread.
    SMF Badges of Honor


    Member since
    Jan 2012
    Posts
    76
    Thanks
    15
    Thanked 46 Times in 19 Posts
    Why is it that people on here always seem to think there's a "MOLE" on the forum trying to be slick, get over on the system, or is a crininal in hiding?

  22. #39
    SMF Badges of Honor

    Member since
    Jul 2011
    Location
    Usa
    Posts
    769
    Thanks
    67
    Thanked 312 Times in 179 Posts
    Personally from my experience, there is one and only one vin plate. Possibly the number maybe stamped in the frame. Personally if this deal bothers you this much, then just take it to the bloody state police. As long as you have a BOS then they wont arrest you for having it in your possession if it is indeed hotter than a prom queen. If your worried about losing your investment, then cut the bloody thing up into prepared. Save the axles and make ya own trailer. Done deal.....no other arguments. :> Thats your only options honesty or possibly thievery in cutting it up and hiding it.... And third option. You really worried about it. I will give you a address, drop it off. And walk away. I will put it to good use real quick....:>

  23. The Following User Says Thank You to ozzy214 for This Post:


  24. #40
    NoMoreScrapLeft started this thread.
    SMF Badges of Honor


    Member since
    Jan 2012
    Posts
    76
    Thanks
    15
    Thanked 46 Times in 19 Posts
    Personally from my experience, there is one and only one vin plate. Possibly the number maybe stamped in the frame. Personally if this deal bothers you this much, then just take it to the bloody state police. As long as you have a BOS then they wont arrest you for having it in your possession if it is indeed hotter than a prom queen. If your worried about losing your investment, then cut the bloody thing up into prepared. Save the axles and make ya own trailer. Done deal.....no other arguments. :> Thats your only options honesty or possibly thievery in cutting it up and hiding it.... And third option. You really worried about it. I will give you a address, drop it off. And walk away. I will put it to good use real quick....:>
    MORE BAD ADVICE! Monday I will haul it over to the DMV. Have them come out and look at it and show them the BOS. If it's good to go I'll pay the cash and get my plates. If for some reason it doesn't happen like that I'll leave it in their parking lot as they'll know what to do with it. There will be "NO" chopping it up, grinding the VIN# off or dropping it off at your babies momma's house so you can chop it up or grind the VIN# off.


  25. Similar threads on the Scrap Metal Forum

    1. Trailer Brand names. Looking for a Tandem Axle trailer for Scrapping.
      By Kochy in forum Scrap Metal Tips and Advice
      Replies: 14
      Last Post: 08-26-2014, 12:40 AM
    2. Tandem Trucks
      By slowpoke09 in forum Vehicle Recycling
      Replies: 11
      Last Post: 09-18-2012, 11:26 PM
    3. Replies: 11
      Last Post: 08-23-2012, 12:19 PM
    4. how much does a tandem axle weigh?
      By moneyfrommetal in forum Scrap Metal Questions and Answers
      Replies: 2
      Last Post: 01-21-2012, 08:08 PM
    5. UPDATE: Utility Trailer with now title...
      By NoMoreScrapLeft in forum Off Topic Discussions
      Replies: 12
      Last Post: 01-11-2012, 07:17 PM

Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 6 users browsing this thread. (0 members and 6 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook