Results 1 to 18 of 18

My Home MAde Wire Stripper

| Tools and Equipment
  1. #1
    bejak started this thread.
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    South Central Minnesota
    Posts
    232
    Thanks
    123
    Thanked 230 Times in 107 Posts

    Cool My Home MAde Wire Stripper

    Here are some pictures of a wire stripper I made from some “scrap” materials and a utility knife blade as a cutter. I used only common hand and power tools to make the stripper. I don’t know what the brackets mounted on the flat iron base came from. The wheel is made from two truck suspension washers, piece of copper tubing, couple of bushings, threaded rod and nuts from a lamp and a steel rod to pivot on. Cutting bar is two pieces of flat iron with holes drilled to bolt together and hold blade tight. The spring under the blade bar helps push up bar when making adjustments for wire size and cut depth.
    This stripper did not work so well at first, but after making some modifications- added hole in base to feed wire up from bottom, added guides on blade bar and shortened how far blade sticks out from bar. Stripper now works very well for something made essentially out of nothing but some stuff that was stashed in drawers and my time.
    I have run several hundred feet of braided/stranded wire through this stripper, works great on longer lengths of wire, kind of putsy for stuff under a couple of feet. Wire shown in the picture is from a computer power cord. I did run the power cord through first to split the outer jacket. Have run wire some smaller than this just to see if it would work. It did, but stripped yield not worth the time.
    Have not pulled any single strand wire though, might work as long as wire bends easily and is not kinked but probably won’t work on large gauge Romex. Tried a degaussing cable, did not work well, the V in the wheel not wide or deep enough to keep wire in place. Have more washers and will make another wheel for large guage braided/stranded wire
    Took me a few hours to make and modify, probably a lot longer than that thinking about how to make one out of essentially nothing. Not a pretty looking commercially made stripper but works well jus the same. Maybe this will give some of you ideas to make your own.






  2. The Following 9 Users say Thank You for This Post by bejak:



  3. #2
    injunjoe's Avatar
    SMF Badges of Honor



    Member since
    Jan 2011
    Location
    Central, FL
    Posts
    1,309
    Thanks
    1,249
    Thanked 1,194 Times in 594 Posts
    Nice job!
    When the white man discovered this country Indians were running it
    no taxes, no debt, women did all the work.
    White man thought he could improve on a system like this. - Old Cherokee saying

    I did not surrender, they took my horse and made him surrender. - Lone Watie

  4. #3
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    X2, Mike.
    "Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}

    Now go beat the copper out of something, Miked

  5. #4
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Nice work sir. And on a side note: Can't tell you how many "huh"s I've got outside of Minnesota when using the phrase "putz'in around"
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  6. #5
    Dumpster-Dee's Avatar
    SMF Badges of Honor



    Member since
    Feb 2011
    Location
    SW Georgia
    Posts
    1,775
    Thanks
    2,286
    Thanked 838 Times in 457 Posts
    I use putzin' around also but since I've lived in CA, NV, and the upper peninsular of Michigan, I'm not sure where I got it. I'm amazed at that invention, bejak.

  7. #6
    corycouch's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    jonesboro ar
    Posts
    1,405
    Thanks
    3,766
    Thanked 1,988 Times in 746 Posts
    nice job very creative

  8. #7
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    I think the term is Yetish in origin but the spelling may be off, Mike.

  9. The Following User Says Thank You to miked for This Post:


  10. #8
    SMF Badges of Honor


    Member since
    Oct 2010
    Posts
    234
    Thanks
    71
    Thanked 195 Times in 90 Posts
    Quote Originally Posted by miked View Post
    I think the term is Yetish in origin but the spelling may be off, Mike.
    Yetish as in Sasquatch? Cool! Or maybe Yiddish?

  11. The Following User Says Thank You to zito for This Post:


  12. #9
    submarinepainter's Avatar
    SMF Badges of Honor



    Member since
    Sep 2011
    Location
    Maine
    Posts
    1,025
    Thanks
    1,230
    Thanked 654 Times in 316 Posts
    nice tool !!!
    Old dogs care about you even when you make mistakes;
    God bless little children while they're still too young to hate

  13. #10
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    how much to make me one?

  14. #11
    SMF Badges of Honor

    Member since
    Jan 2012
    Posts
    89
    Thanks
    0
    Thanked 31 Times in 18 Posts
    very very smart i am going to build one as soon as i have time!

  15. #12
    bejak started this thread.
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    South Central Minnesota
    Posts
    232
    Thanks
    123
    Thanked 230 Times in 107 Posts
    Thanks for the request PTS, this is going to be a one time build for myself. But if you got a hacksaw, angle grinder, drill and bits, a few hand tools, an imagination and some scrap I bet you could make your own.

  16. #13
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    Boise, ID
    Posts
    2,702
    Thanks
    2,237
    Thanked 2,352 Times in 1,014 Posts
    Good job!

    The brackets look like garage door hardware.

  17. #14
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    Very nice work! the best part is that it uses a cheap and easily replaceable blade. That has always been my question when someone links a new fangled wire stripper.

  18. #15
    sollozo45's Avatar
    SMF Badges of Honor


    Member since
    Jan 2013
    Posts
    60
    Thanks
    47
    Thanked 49 Times in 27 Posts
    Love this idea of yours bejak. thanks for sharing

  19. #16
    LarryB's Avatar
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Ottawa, Ontario, Canada
    Posts
    221
    Thanks
    896
    Thanked 73 Times in 59 Posts
    Quote Originally Posted by zito View Post
    Yetish as in Sasquatch? Cool! Or maybe Yiddish?
    Hehehe boys, up here it's Yiddish too. And you never wanna be a putz. lb


  20. Similar threads on the Scrap Metal Forum

    1. My first experience with new wire stripper
      By miked in forum Tools and Equipment
      Replies: 61
      Last Post: 08-13-2014, 02:01 PM
    2. $14 wire stripper
      By rca987 in forum Tools and Equipment
      Replies: 10
      Last Post: 06-15-2013, 08:50 PM
    3. Reliable wire stripper?
      By mascraps in forum Tools and Equipment
      Replies: 14
      Last Post: 07-27-2012, 12:24 PM
    4. Has anyone invented there own home made wire strippers
      By DropYoTop in forum Tools and Equipment
      Replies: 8
      Last Post: 06-09-2012, 09:03 AM
    5. Hydrauic Press for white goods - home made.
      By gustavus in forum Tools and Equipment
      Replies: 18
      Last Post: 05-04-2012, 06:16 AM

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook