Results 1 to 18 of 18
  1. #1
    patricke started this thread.
    SMF Badges of Honor

    Member since
    Oct 2011
    Posts
    8
    Thanks
    1
    Thanked 8 Times in 6 Posts

    Thumbs up Deal on HF 1170 lb capacity 4x8 Trailer

    I know it may not be the greatest trailer on the market but if you're looking for an inexpensive trailer, call Harbor Freight and see if they have Item #94564. If they have it, grab a 20% off coupon out of your favorite magazine and run down there with $198.00 in hand. Be sure and call ahead first. I had to call 3 HF's in the area until I found one that had it in stock.



    The regular price is $459 and is currently on sale for $349. Now the little known secret....The trailer is getting a new SKU number and all of the trailers that still have that item number are being sold for $230. With the 20% discount and some added tax it comes to $197 and some change!

    I picked one this past Friday and assembled it yesterday. For the price and what I intend to use it for, I couldn't pass it up!

    Here is a link to the trailer: http://www.harborfreight.com/automot...res-94564.html

  2. The Following 3 Users say Thank You for This Post by patricke:



  3. #2
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    how cool! some guy was mentioning in another post just this morning how he didn't want to carry scrap in either of his two cars and i was thinking, that guy needs a trailer!

  4. #3
    SMF Badges of Honor


    Member since
    Dec 2011
    Posts
    14
    Thanks
    7
    Thanked 14 Times in 6 Posts
    Nice deal, decent of you to take the time to share it with everyone here.

  5. #4
    patricke started this thread.
    SMF Badges of Honor

    Member since
    Oct 2011
    Posts
    8
    Thanks
    1
    Thanked 8 Times in 6 Posts
    With all of the great information that I get from all of you here on the forum, I am more than happy to share any deals I may run across.

  6. #5
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    that ad says 1720 pounds? 12 inch tires aren't very big ; )

  7. #6
    danielms's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    mississippi
    Posts
    133
    Thanks
    71
    Thanked 31 Times in 25 Posts
    i had one for awhile, the tire locked up and ground half of the rim off before i knew that anythingwas wrong. took awhile to notice that the black mark in the rearview mirror was not in front of me also.

  8. The Following User Says Thank You to danielms for This Post:


  9. #7
    SMF Badges of Honor




    Member since
    Mar 2012
    Location
    ks
    Posts
    2,187
    Thanks
    2,513
    Thanked 2,140 Times in 898 Posts
    That sucks man never a good day when that happens, thanks for sharing the info pa

  10. #8
    thirsty's Avatar
    SMF Badges of Honor

    Member since
    Nov 2011
    Posts
    279
    Thanks
    115
    Thanked 227 Times in 88 Posts
    I have one just like this one. Great little trailer to pick things up with. I can push this thing around by hand and get it into tight little spots in my yard for storage etc. Ive loaded the crap out of mine, not much over the limit, but it handled the weight well, tracks straight and can be pulled by anything with 4 wheels and a motor.

  11. #9
    SMF Badges of Honor




    Member since
    Mar 2012
    Location
    ks
    Posts
    2,187
    Thanks
    2,513
    Thanked 2,140 Times in 898 Posts
    Whatd you use to finish that trailer out with ?

  12. #10
    SMF Badges of Honor


    Member since
    Jan 2012
    Posts
    10
    Thanks
    0
    Thanked 0 Times in 0 Posts
    its a good starter trailer i your tight on cash

  13. #11
    SMF Badges of Honor

    Member since
    Dec 2011
    Posts
    91
    Thanks
    182
    Thanked 41 Times in 29 Posts
    Thankyou very much for the info.

    I seriously plan to see if I can get that deal nearby (tHERE'S A hf near a relatives place ,so I walk-in).

    Been wondering for a long time about converting old boat trailers into normal ones(?)
    IDK.

    The one axle trialers seem good for smaller trucks/cars too though.
    Course, it's always obvious somebody's a scrapper when I see anything pulling a trailer...Ideally I'd park a two axle one in storage, load it with steel/disassembled stuff, THEN drive it to scrap myself.
    In the mean time, something like that looks good. Besides my D*MN storage keep making it hard to fit a trailer OR whatever...
    Good Day. Got to get back to some stuff...I'm looking for bigger truck/ repair for my "new" one lately...
    Thanks!

  14. #12
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Denver
    Posts
    343
    Thanks
    5
    Thanked 366 Times in 147 Posts
    We had a guy try to bring in a 15,000 lb. counter weight on a trailer that could probably hold 6-8k in weight at most. Needless to say he broke his back axle, on the scale nonetheless. If I were an a-hole I could have lowballed the heck out of him on price just because I knew he wouldn't be able to haul it anywhere else. Ohh and KZBell just happened to be at my yard at the time to witness the fun.

  15. #13
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,731
    Thanks
    6,815
    Thanked 3,465 Times in 1,990 Posts
    Quote Originally Posted by danielms View Post
    i had one for awhile, the tire locked up and ground half of the rim off before i knew that anythingwas wrong. took awhile to notice that the black mark in the rearview mirror was not in front of me also.
    I've often taken foreign stuff apart after purchase (such as a tiawan bench grinder etc) if I had plans of relying on it for any time, made sure they were clean and well greased, before putting them to serious use. Might not be a bad idea with these trailers too. Being a new seal, you might can, if you're careful, break it down and wash all the parts, put some good grease in there, and get it back together with proper adjustments, without breaking the seal. Also, those small wheels can't be pulled very fast, I would go no more than 55, and that only for very short distances
    Last edited by Bear; 03-26-2012 at 06:13 PM.

  16. #14
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Quote Originally Posted by BohemianLush View Post
    We had a guy try to bring in a 15,000 lb. counter weight on a trailer that could probably hold 6-8k in weight at most. Needless to say he broke his back axle, on the scale nonetheless. If I were an a-hole I could have lowballed the heck out of him on price just because I knew he wouldn't be able to haul it anywhere else. Ohh and KZBell just happened to be at my yard at the time to witness the fun.
    Tow truck had pulled (by chain) the POS old chevy and trailer that that was on over the scale...I looked at the scale and the total weight I wanna say around 25k. Guy should have just cashed in everything, truck included.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  17. #15
    skippy's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    sacramento,ca
    Posts
    194
    Thanks
    2
    Thanked 63 Times in 40 Posts
    My flatbed is being fixed so that trailer sounds good for the corolla because I cant scrap much. im about to hook up one of those kid trailers you tow behind a bicycle. I know with a little duct tape, jb weld, and determination I could haul a washer with the kid trailer and corolla.

  18. #16
    danielms's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    mississippi
    Posts
    133
    Thanks
    71
    Thanked 31 Times in 25 Posts
    Quote Originally Posted by Bear View Post
    I've often taken foreign stuff apart after purchase (such as a tiawan bench grinder etc) if I had plans of relying on it for any time, made sure they were clean and well greased, before putting them to serious use. Might not be a bad idea with these trailers too. Being a new seal, you might can, if you're careful, break it down and wash all the parts, put some good grease in there, and get it back together with proper adjustments, without breaking the seal. Also, those small wheels can't be pulled very fast, I would go no more than 55, and that only for very short distances
    yeah... I went too far and too fast, but it worked great before that happened. the good thing about it is that i just put it on top of my expidition and kept going. me and the ol'lady were able to pick it up and toss it up there. bought a flatbed now for the small loads best investment ever.

  19. The Following User Says Thank You to danielms for This Post:


  20. #17
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Quote Originally Posted by danielms View Post
    yeah... I went too far and too fast, but it worked great before that happened. the good thing about it is that i just put it on top of my expidition and kept going. me and the ol'lady were able to pick it up and toss it up there. bought a flatbed now for the small loads best investment ever.
    Sometimes when you overload them you'll put alot of stress on those bearings, like was said above you might repack the bearings with good quality grease. There's even a Slick 50 grease now, put some of that on your fingers and pick up a screwdriver if you can.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  21. #18
    danielms's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    mississippi
    Posts
    133
    Thanks
    71
    Thanked 31 Times in 25 Posts
    was running almost empty just had 2 trash cans of lite wire on the trailer that i could not get a decent price on, but i was running 75 or 80 and i had let it set a couple of months before i used it. it will probably just sit there till it rusts out now as i have gotten 3 trucks in my trading now, and am working on getting a single car box for my antique buisness and then a 3/4 car wedge to do hotshot work. will definetly check out the slick 50.


  22. Similar threads on the Scrap Metal Forum

    1. Trailer Brand names. Looking for a Tandem Axle trailer for Scrapping.
      By Kochy in forum Scrap Metal Tips and Advice
      Replies: 14
      Last Post: 08-26-2014, 12:40 AM
    2. DIY forklift with a 500lbs lift capacity
      By otp57 in forum Tools and Equipment
      Replies: 3
      Last Post: 09-28-2012, 04:12 PM
    3. Replies: 11
      Last Post: 08-23-2012, 12:19 PM
    4. Vehicle capacity
      By Russell in forum Tools and Equipment
      Replies: 9
      Last Post: 06-15-2012, 03:32 PM
    5. Small capacity hard drives
      By ScrappinRed in forum General Electronics Recycling
      Replies: 20
      Last Post: 03-02-2012, 08:18 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook