is this board got any value to it? I was thinking low grade I wanted your guys option
is this board got any value to it? I was thinking low grade I wanted your guys option
Brown boards are low grade. Alot of the guys here just throw it in with shred.
If I didn't have bad luck, I'd have no luck at all...
GC Metal Recycling & Recovery
Barrie, Ontario.
one thing I should of added was that it was sliver colored fingers on the end.
Can you get a pic of the silver fingers? I don't see them in the one above. Jord is pretty much right tho, usually brown means shred/low grade, unless there is something good on there. I'm no expert on grading but that's how I do it.
If there is buttons on there, be sure to pop'm open, you'll find a gold disk/silver disk depending on what it came out of. Some times you'll be surprised in the difference in some boards. An example..usually when I get home phones, there isn't much in them but a green board with brown sides, speaker, etc. I just popped one open, an found the green top/brown bottom board had some gold on it(epoxied over of course..grr! but I can see it!) an a smaller board with a lot more gold on it. I was amazed as usually the types of home phones I get suck an not much goodies. Same with LNB, Cable/sat box boards. Sometimes you'll find a nice surprise in them.
Guess what I'm trying to say is....just cause you open a lot of something, don't always assume you'll find the same results as some items will trick you an surprise you with what you find on the inside.
As always your mileage may vary.
Sirscrapalot - I'm happy that I have brought laughter because I have been shown by many the value of it in so many lives, in so many ways. - Lucille Ball of I Love Lucy fame
Are you guys throwing them in shred so they don't take up so much room? I am getting .30 per pound for low grade boards. I throw them in a Gaylord til full then take them in. Was a little shocked to see that.
Check the legs on that silver top transistor that is setting inside that heatshield, might have gold legs.
P & M Recycling - Specializing in E-Waste Recycling.
If you enjoy your freedom, thank a vet.
are you breaking down scrap in the front of the car ? I've seen posts about being short of work space, but i'm afraid this one about takes the prize.
Last edited by Bear; 11-16-2013 at 08:08 PM.
Can't speak for others but I throw my brown boards into shred cause..a. my yard lets me, b. To much to ship out, an c. no local buyer other then my yard.
Sirscrapalot - YMMV - not me
I'm no expert on boards but I would pop open the little cubical aluminum enclosures--they are IF transformers and might have a little copper coil in them. Also, the end of the CATV wire has a metal connector--it might be brass under the chrome.
EDIT: Just had a closer look at the cubical aluminum boxes on the board--they might be switches--can't tell.
Also, as Bear said, are you working out of your car?
Jon.
Last edited by sawmilleng; 11-16-2013 at 08:15 PM.
LOL...I thought I saw them but couldn't be sure that was it, could just be me tho! Not been into the cooler to much this evening!
Sirscrapalot - Go go Gadget beer goggles!
That makes sense. Didn't realize I was getting such a good deal.
Ok like they said..low grade brown board...I get .20 pound but have to take it about an hour...luckily they also buy my other low payout ewaste so I take a large load at a time.
And silver finger trim off and save, look for copper bearing, many of the little silver rectangles have silver contact in them, if going into shred pukl that aluminum heatsink, pull any ic chips and tantalum, any switches generally have a gold or silver contact in them, and of course clip any wires.
The crazy Canadian from the far north speaks truth. Keep at it, an you'll find the good stuff.
Being stubborn in this game pays off. Keep plugging away an you'll find the good stuff, an usually in the oddest places. Heh.
Sirscrapalot - Facts are stubborn, but statistics are more pliable. - Mark Twain
There are currently 6 users browsing this thread. (0 members and 6 guests)
Bookmarks