Recovering gas EFI style

Thank god for electric fuel injection, makes getting gas from salvage autos a snap. This is just a general run down and not meant to be a step by step guide.
Locate schrader valve on the fuel rail and remove the core, looks like a valve stem on a tire. Slide a 2-3' length of 1/4" fuel line over the valve and secure with hose clamp


Locate wires that run the pump, usually over rear seat or in this case in the trunk


Next the tricky part, determine which is the two wires you need to make the pump run, this ford uses pink/black stripe for 12v (+) and black for ground.




Connect your wires and put your 1/4" fuel line into your fuel container of your choice and let it pump

This old crown Vic had almost 10 gallons in it or 33.40$ worth of gas.