Experienced Scrapper
First truck engine ?
Hey all it's been awhile lol been busy. I got a question for ya.
I picked up an old ford truck engine and was wondering should I strip it or scrap it whole? I do plan on cutting off the alt. for the elec.motor.
Should I sell it with my tin or sell it by itself (special trip)?
Thanks in advance,
drewan
|
you should be able to get to the starter easy since its pulled, take off the carb for breakage, id leave it at that and scrap the rest whole imo
Metal Recycling Entrepreneur
You should be able to sell the uncleaned block as a dirty motor, the grade is higher than tin.
Don't forget to remove any loose battery cables still on it (if applicable). Should be at the starter and a smaller one at the alternator.
Scrapper
it being an old Ford engine, I think i would remove the alt and starter ( like you said ) and then scrap it whole. If it had been a newer motor out of a 4 cylinder i think i would at least check the head(s) for aluminum. However, if the motor runs, i would probably try to use it. I have been trying to locate a free running engine, to try to build a small saw mill, to mill my own lumber.
Happy Scrappin !!!
Rural scrapper
Strip the motor down and sell the block and heads for cast and the rest for shred.
Alvord iron and salvage
3rd generation scrapper and dam proud of it
|
The motor might have alum heads or more on it.
We buy electronic scrap, Gold Karat scrap, gold filled, refined gold, silver and many other item's.
|
Originally Posted by BarrenRealms007
An old Ford would not have an Alum. head.I picked up an old ford truck engine and was wondering should I strip it or scrap it whole
P & M Recycling - Specializing in E-Waste Recycling.
If you enjoy your freedom, thank a vet.
Metal Recycling Entrepreneur
reckon an old ford 6 cyl valve cover's worth anything? Has "powered by Ford" molded into the top
Rural scrapper
Sure hope not bear, because I've thrown bunches of em in the shred pile !
|
Anybody ever done a calculation on stripping it vs straight shred? I can't justify tearing it down for just a couple of bucks.
Burly Smash![/COLOR][/SIZE][/FONT]
John Terrell (248) 224-2188
Burly Guys Junk Removal LLC
5499 Perry Drive Unit P Waterford, MI 48329
http://www.burlyguys.com
|
|
He didn't say what year, I have a 1999 with a Triton V-8 and the heads are alum on it.
I scrapped a truck engine/trans yesterday. It was a big v6 gmc, 60's era. must of weighed over 1200 lbs
Got paid cast for it, with the carb, valve covers and misc hoses dangling around
I never strip. Pull the motors rest shred.
Experienced Scrapper
I just took the altenator off and brought the motor to the yard got 20 some buck for it or around .07-.08 cents a pound. I should have thrown it with the tin for weight.
There are currently 1 users browsing this thread. (0 members and 1 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks