Page 1 of 2 12 LastLast
Results 1 to 20 of 39
  1. #1
    sledge started this thread.
    sledge's Avatar
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Central Indiana
    Posts
    2,717
    Thanks
    4,534
    Thanked 4,240 Times in 1,609 Posts

    Potential to buy Wrecked 2003 For F-350 for $900

    Seems these types of post are commonplace at the moment. But I'm hoping some of you seasoned folks could assist (Cough.. Liberty..Cory) :-)
    I have not seen it yet, I am going to take a look tomorrow at it, but a friend of my Father-In-Law calls me and says "My son got hit a couple nights ago, Insurance Company has totalled it, he can buyback for $900 and would sell it to me at $900. I will have to look at it tomorrow at noon or 1 and make my decision then. Damage is the Front Passenger Wheel, Fender and Door- Internal Damage is not known.



    This would be issued a SALVAGE title.. as per his insurance rep. I have no dealings with trying to register a vehicle with a Salvage Title- My understanding is that SOME Insurance companies will not take on a vehicle with a Salvage Title.

    So My thoughts at the moment are:
    1. Get it Fixed- Sell it off
    2. Part it Out

    Scrapping it is Not an option sadly (nor should it be the way the guy says other than recent damage- the truck is cherry) The weight won't pay for it, has steel rims, no alum, Curb is about 6,007 lbs- Net about $600 at the yard.

    Heavy Duty Tow Package, not an abused truck- worked, but not beaten to *#&#!

    Any thoughts- Buy? Pass? Thanks Gents!
    Wish I had more info to go on, a picture or 10 to show you. Hopefully you guys may have some insight even "sight unseen"
    Thanks!
    Last edited by sledge; 09-12-2016 at 09:38 PM.
    I'm so into scrapping.. When my Steel Toe Boots Wear out, I cut the Steel out of them and recycle the Toe!


  2. #2
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    If your needing a truck to add to your fleet then you should seriously think about it, but if it's to fix & flip then your gonna have your 900 dollars tied up for a week or two.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  3. The Following 2 Users say Thank You for This Post by Mechanic688:


  4. #3
    sledge started this thread.
    sledge's Avatar
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Central Indiana
    Posts
    2,717
    Thanks
    4,534
    Thanked 4,240 Times in 1,609 Posts
    Mechanic: The tough part is.. As of this moment, I have no idea how BAD is it? I did a quick search.. a Running 2003 is going for $9500-$14K around this area. I don't want to drop $900, Plus say another $5K in it to try and flip. If the frame is bent, at least in Indiana, They tend to total vehicles here. I remember I used to own a Sebring, guy with a Ford LTD wagon plowed me into the 8 inch curb while doing about 40 mph, it tore the passenger front CV Axle out, tow driver said "Man.. if the frames bent- you're looking at it being totalled" I would not mind seeing this thing back on the road.. I'm wondering if I give $900, don't touch it and sell it off as is- CL, Auction, whatever. If I double my money, I'd be happy! Just don't know if there will be enough demand for me putting up the $900. *Going back to corner to scratch head and ponder*
    Appreciate the reply!
    Last edited by sledge; 09-12-2016 at 09:39 PM.

  5. #4
    corycouch's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    jonesboro ar
    Posts
    1,405
    Thanks
    3,766
    Thanked 1,988 Times in 746 Posts
    sorry sledge i may have called you too late, i left you a message
    expect the worst and hope for the best
    cory couch
    c & c recycling
    JUNKERS AND CLUNKERS
    (870) 897-6484

  6. #5
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    The truck I borrow now was sideswiped (down low) and the ins. company totaled it cause to repair was more than the value.
    Then they gave him (the owner) back the truck for free. I use it when I need to pick up bigger items, the only real damage is the pass. running board, and a crease in the rear fender, NO frame damage.

    The ins. company didn't even charge him for the truck.

  7. #6
    sledge started this thread.
    sledge's Avatar
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Central Indiana
    Posts
    2,717
    Thanks
    4,534
    Thanked 4,240 Times in 1,609 Posts
    Quote Originally Posted by Mechanic688 View Post
    The truck I borrow now was sideswiped (down low) and the ins. company totaled it cause to repair was more than the value.
    Then they gave him (the owner) back the truck for free. I use it when I need to pick up bigger items, the only real damage is the pass. running board, and a crease in the rear fender, NO frame damage.

    The ins. company didn't even charge him for the truck.
    Well wouldn't that be nice in this situation.. The Ins Co will sell it back to him for the $900.. No freebie here.. Grrr

  8. #7
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Quote Originally Posted by sledge42 View Post
    Well wouldn't that be nice in this situation.. The Ins Co will sell it back to him for the $900.. No freebie here.. Grrr
    The difference there is this one I'm talking about was only a 2000. dollar one and your talking about a 9000.

  9. The Following User Says Thank You to Mechanic688 for This Post:


  10. #8
    sledge started this thread.
    sledge's Avatar
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Central Indiana
    Posts
    2,717
    Thanks
    4,534
    Thanked 4,240 Times in 1,609 Posts
    Got Photos Today! Still trying to get it figured out!
    It is a V-10 Gas Engine
    145,000 Miles
    Interior is Good
    Bed is Good

    Looks as if it bent the frame or A-Arms, Shoved the wheel into the wheelhouse and kinked the fender, Door and Cab. Can't open the hood at the moment because the fender got pushed over the top of the hood just enough to not allow it to open.









    Last edited by sledge; 05-15-2013 at 05:17 PM. Reason: additional Info

  11. The Following User Says Thank You to sledge for This Post:


  12. #9
    DiamondN's Avatar
    SMF Badges of Honor


    Member since
    Oct 2012
    Location
    Indiana
    Posts
    912
    Thanks
    2,150
    Thanked 378 Times in 243 Posts
    The damage doesn't look all that bad to me, and would consider it a fixer, especially if you can buy it for $900. Even if you were to part it out, you're gonna come out ahead. Most collision shops will do any needed framework for cash allowing you to reassemble the truck and do any refinishing work yourself. I used to stretch frames at Pearson's in Zionsville.

  13. The Following 2 Users say Thank You for This Post by DiamondN:


  14. #10
    bigdog72's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    honey brook PA
    Posts
    274
    Thanks
    14
    Thanked 137 Times in 68 Posts
    in that last picture on the right it looks like the frame is pushed in? not sure without seeing it but it the frame isnt bent or not bent that bad you should have little problem fixing it, parts alone you would be making money i vote yes

  15. The Following User Says Thank You to bigdog72 for This Post:


  16. #11
    bigdog72's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    honey brook PA
    Posts
    274
    Thanks
    14
    Thanked 137 Times in 68 Posts
    also depends how it was hit but it doesn't look bad enough to not be fixed

  17. The Following User Says Thank You to bigdog72 for This Post:


  18. #12
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    That would be a tough one to walk away from.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  19. The Following 2 Users say Thank You for This Post by KzScrapper:


  20. #13
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Not a big deal if the frame is bent ahead or behind the wheel, more major if it's between the wheels.

  21. The Following User Says Thank You to Mechanic688 for This Post:


  22. #14
    SMF Badges of Honor


    Member since
    Aug 2011
    Location
    Green Bay, WI
    Posts
    377
    Thanks
    38
    Thanked 162 Times in 77 Posts
    Fix and flip. All day.

    Even to part out you got serious profit sitting there.

  23. The Following User Says Thank You to Gnraxlrose88 for This Post:


  24. #15
    sledge started this thread.
    sledge's Avatar
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Central Indiana
    Posts
    2,717
    Thanks
    4,534
    Thanked 4,240 Times in 1,609 Posts
    Thank you Gents! I appreciate all the responses, The Phone calls :-), I'm in Limbo for the moment as the guy who hit the truck's insurance company wants to look at it today, I should know today if this can become a done deal or not! I appreciate the responses very much. This would be my first "Fix and Flip" so I'm a bit nervous about it. I'm used to paying $200 bucks for a non-running turd and gutting it.. never a question of "Should I fix this thing?" So thanks again!
    Last edited by sledge; 09-12-2016 at 09:39 PM.

  25. The Following User Says Thank You to sledge for This Post:


  26. #16
    SMF Badges of Honor

    Member since
    Jul 2011
    Location
    Usa
    Posts
    769
    Thanks
    67
    Thanked 312 Times in 179 Posts
    Go fir it. Easy fix. I dont see frame damage. A fedner, a-arm and a door. Some bondo on the rocker..less than 500 to fix you do it ya self. I have seen much worse back in the day when I was ase inspection mechanic the body shops "recertified" trying to flip for the auction or lot.

  27. The Following User Says Thank You to ozzy214 for This Post:


  28. #17
    sledge started this thread.
    sledge's Avatar
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Central Indiana
    Posts
    2,717
    Thanks
    4,534
    Thanked 4,240 Times in 1,609 Posts
    Well Gents.. Got to tell you the end of the story. I finally got the truck today.. My body guy said "Haul it down.. I won't be there, but I want to see it myself" Works out since I wanted it off the trailer anyway and he won't charge me to store it. So he shares some space with the building owner and a car Detailer.. As I'm pulling in both of them are all over it.. "How many Miles?" "Does it Run?" "You want to sell it?" I back the thing off the trailer and onto the ground, and by then the detailer already owned it in his mind.. He made me an offer, I countered, he took it. Truck is Gone!

    Only fear: Body guy is going to be RIPPED I got a feeling! But a Beaut day! Beaut day! Total outlay of cash getting it repaired would have cost me about $2500 (Cost of Truck and work to be done to get it back to the road) out of pocket.. then I would have had to split the profit with the Body Guy and gone through the hell of selling the darn thing... This was quick and dirty! Me Likey!
    Last edited by sledge; 05-17-2013 at 08:49 PM.

  29. The Following 9 Users say Thank You for This Post by sledge:


  30. #18
    DiamondN's Avatar
    SMF Badges of Honor


    Member since
    Oct 2012
    Location
    Indiana
    Posts
    912
    Thanks
    2,150
    Thanked 378 Times in 243 Posts
    Thanks for the update...

  31. #19
    sledge started this thread.
    sledge's Avatar
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Central Indiana
    Posts
    2,717
    Thanks
    4,534
    Thanked 4,240 Times in 1,609 Posts
    Spoke to the body guy today.. He wasn't mad at all. He was like "I'm proud of ya" I was so worried I may have messed up a relationship. I know he saw money in it for himself after doing work he would have done to fix it. So the relationship is still good, he's happy for me.. and I'm glad he wasn't upset with me about how the deal transpired!
    Last edited by sledge; 05-18-2013 at 12:47 PM.

  32. The Following 3 Users say Thank You for This Post by sledge:


  33. #20
    BroJer's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Phoenix-West Valley
    Posts
    1,004
    Thanks
    3,210
    Thanked 1,610 Times in 641 Posts
    take the body guy a happy meal ;-) Keep doing what your doing, and the chance to work a deal with him, will come!

    great outcome! thanks for sharing!!

  34. The Following 2 Users say Thank You for This Post by BroJer:



  35. Similar threads on the Scrap Metal Forum

    1. Junkthecar - Sell A Nice, Used, Damaged, Wrecked, Junk car
      By junkthecar in forum Introduce yourself
      Replies: 0
      Last Post: 01-11-2012, 05:05 AM
    2. Help ! I wrecked my lawn tractor.
      By Dumpster-Dee in forum Off Topic Discussions
      Replies: 13
      Last Post: 08-28-2011, 12:06 AM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook