Results 1 to 12 of 12

starter scrapping

| Vehicle Recycling
  1. #1
    ozzy214 started this thread.
    SMF Badges of Honor

    Member since
    Jul 2011
    Location
    Usa
    Posts
    769
    Thanks
    67
    Thanked 312 Times in 179 Posts

    Smile starter scrapping

    I been buying starters for $2.00 a piece. Only problem is they are like treadmill motors. Permanent dc magnet with the copper wrapped around the rotor. And its sealed in epoxy. And the solenoids are sealed. No good way to get them open.

    What do you guys do with them? I see like a $1.00 profit for 10 mins work, because all there is steel, alu cast nose...and the solenoid/rotor, going into the motor bucker at 20c a lb.

    What are your thoughts?

    Been thinking about starting a fire to burn them out, but dont like the environmental factors. Which is why I dont burn wire either.



  2. #2
    SMF Badges of Honor


    Member since
    Oct 2011
    Location
    fresno, california
    Posts
    146
    Thanks
    2
    Thanked 41 Times in 26 Posts
    wondering too

  3. #3
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Maybe find a buyer paying more for them whole, if you had a large amount you will command a better price.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  4. #4
    ozzy214 started this thread.
    SMF Badges of Honor

    Member since
    Jul 2011
    Location
    Usa
    Posts
    769
    Thanks
    67
    Thanked 312 Times in 179 Posts
    I don't. I only have a handful which I bought from craigs for like 2 per unit. After opening one, its not worth it. Need to know what you guys do.

  5. #5
    gustavus is offline Metal Recycling Entrepreneur
    gustavus's Avatar
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    Canada
    Posts
    1,209
    Thanks
    1,351
    Thanked 920 Times in 425 Posts
    Treadmill DC Motor -- Windmill generator +
    Last edited by gustavus; 12-09-2011 at 11:31 PM.

  6. #6
    ozzy214 started this thread.
    SMF Badges of Honor

    Member since
    Jul 2011
    Location
    Usa
    Posts
    769
    Thanks
    67
    Thanked 312 Times in 179 Posts
    I know that gus, thanks. But i saw ya a expert on starters. What do you do with them?

  7. #7
    SMF Badges of Honor


    Member since
    May 2011
    Location
    Dallas TX
    Posts
    1,979
    Thanks
    158
    Thanked 1,182 Times in 518 Posts
    Find some core buyers.
    My company name was Easy Recycle but has since been closed
    My Name Stephan Harz
    My YouTube page

  8. #8
    gustavus is offline Metal Recycling Entrepreneur
    gustavus's Avatar
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    Canada
    Posts
    1,209
    Thanks
    1,351
    Thanked 920 Times in 425 Posts
    Quote Originally Posted by ozzy214 View Post
    I know that gus, thanks. But i saw ya a expert on starters. What do you do with them?
    Those crappy ones with the permanent magnets toss em into the motor breakage bin. The oldies with copper field and armature windings dissemble them for the copper.

    For those depressed bolt that hold the field coil into place burn it out with the plasma, a good impact screw driver would loosen them for those not familiar with this tool. You insert the proper bit, give the handle a slight twist then give the end of the driver a whack with a hammer.

    Impact screw drivers are like $10.00 with a set of bits, if your working on a motor cycle engine or an outboard these are a must have tool, where your air impact will brake off screws and bolts these things break em lose every time.

    Has anyone here tried using the wood chisel to cut the copper wire from motor field coils, starter and generator armatures as I had described in an earlier post, lets hear how it worked for ya. Maybe post some pictures to replace the ones I posted that got deleted.

  9. #9
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Maybe post some pictures to replace the ones I posted that got deleted.
    Some of those pictures were from photobucket so if you moved some of your pic's around they will disappear. You copied that specific location so if you put it in another sub album the location will be wrong.

  10. #10
    gustavus is offline Metal Recycling Entrepreneur
    gustavus's Avatar
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    Canada
    Posts
    1,209
    Thanks
    1,351
    Thanked 920 Times in 425 Posts
    Quote Originally Posted by Mechanic688 View Post
    Some of those pictures were from photobucket so if you moved some of your pic's around they will disappear. You copied that specific location so if you put it in another sub album the location will be wrong.
    Be alright if we were only talking a couple of pictures here, there was dozens that I posted along with some videos. The photobucket account belongs to my other, we use it for hosting our ebay pictures, she deleted the folder I had those pictures in. They are not coming back anytime soon.

  11. #11
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    she deleted the folder I had those pictures in. They are not coming back anytime soon.
    Ok, got flushed right down the loo, got it now,,,

  12. #12
    SMF Badges of Honor


    Member since
    Nov 2011
    Location
    boise, ID
    Posts
    1,605
    Thanks
    469
    Thanked 1,462 Times in 668 Posts
    I tried the chisel on the winding cores a while ago. Now I use a cut-off blade in my table saw. Goes a lot faster.

  13. The Following User Says Thank You to freonjoe for This Post:



  14. Similar threads on the Scrap Metal Forum

    1. Copper from starter!
      By BubbasGarage in forum Scrap Metal Questions and Answers
      Replies: 5
      Last Post: 12-11-2011, 08:37 PM
    2. old old GM starter breakdown price
      By EcoSafe in forum Dismantling, Breaking Down & Maximizing Scrap
      Replies: 2
      Last Post: 10-09-2011, 02:15 PM
    3. Scrap core, electric motor, alternator, starter buyer
      By CM_SCRAPBUYER5978 in forum Introduce yourself
      Replies: 0
      Last Post: 06-30-2011, 06:35 PM
    4. marine grade starter
      By Lawn Island Scrapper in forum Scrap Metal Questions and Answers
      Replies: 3
      Last Post: 05-04-2011, 01:50 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook