Results 1 to 10 of 10

Vintage stereo receivers

| Vintage Electronics
  1. #1
    aurum started this thread.
    SMF Badges of Honor

    Member since
    Apr 2012
    Location
    Maple Ridge, BC, Canada
    Posts
    254
    Thanks
    103
    Thanked 306 Times in 125 Posts

    Vintage stereo receivers

    If you get any vintage receivers, be sure to check for value before scrapping!
    The other day I got an old Marantz 2250 receiver along with a load of desktops. I didn't think much of it, I was ready to scrap it.
    Then I saw an ad on Craigslist someone looking for this kind of stuff. I gave the guy a call, ended up not making a deal with him as he was too far away. But the conversation lead me to do a bit of research on ebay and it turned out the receiver I had was quite valuable. I listed it and it sold for $229 + shipping, in non-working condition! (Working ones of the same model sold for $500+)
    The lesson is to check for resale value before scrapping!

  2. The Following 5 Users say Thank You for This Post by aurum:



  3. #2
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,168
    Thanks
    632
    Thanked 2,503 Times in 1,138 Posts
    Audiophile's pay large for most tube amps, I've sold a few but mostly I find vintage transistorised stereo equipment.

    One of my better finds was a Quad II tube amplifier found in a woodshed, I did not know was an amp until I researched it and found out these were a highly coveted amp. The one I sold went for $800.00 to a guy in Italy.

    Last edited by alloy2; 02-09-2016 at 01:33 AM.

  4. The Following 3 Users say Thank You for This Post by alloy2:


  5. #3
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    Marantz is very collectable. I think its American hand made version of a jap brand, owned by Americans.
    I sold a Marantz CD player for NZ$100, worth English £100 (NZ$270). Only paid a few $ for it.

    I have a very early and collectable transistorised audio Amp, a Sansui AU222 . That I found in scrap for free....


    And a valve elpico amp, that for sound quality just blew away a modern Yamaha amp. And it was the best amp I could find sub$800...
    I found that and a even better value stero amp for free in scrap once.

    Along with a 'Valve powered amp'. I thought this could be worth something...

    Its a scam, its a 'Valve powered, amp...."
    Yes the power supply uses valves, and the actual amp is a transistor board the size of a cigarette packet.

    The Quad, "ouch." I sold a Quad mono amp and tuner for $90 and another two bigger amps with no preamp for even less..
    I still have the Akai electrostatic headphones that I brought in that deal though, need oil filled ear padding fixed first. Amazing quality, no background noise at all.

    Oh, and one of these tapedecks. Its the sort that was used by reporters in Vietnam and also to record bootleg versions of live Grateful dead concerts.
    And, surprised to notice it, in the movie 'Wonderland avenue'. It was used by the Police to record a conversation. Nice touch of authenticity.

    Note, of you ever get the chance, read the book 'Wonderland avenue' by Danny Sugarman. It involves soo many famous people and a insight to 'The Doors' Jim Morrison, Iggy Pop, John Holmes and well even Danny....
    Last edited by eesakiwi; 02-09-2016 at 06:27 AM.

  6. The Following 5 Users say Thank You for This Post by eesakiwi:


  7. #4
    bigburtchino's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    California
    Posts
    1,647
    Thanks
    4,388
    Thanked 2,835 Times in 1,132 Posts
    There is also a good profit in selling the parts of vintage stereos and antique tube radios. So "think" before you destroy, what is no longer made and harder to find at a ever increasing rate. I would and do "hold" and not scrap all 1960's, 70's and 80's quality "name brands" electronics. There's also good stuff before that, Gibson guitar tube amps 50's - 60's just for example.

    Vintage Audio in the early 70's was not only state of the art, it was nice to just look at and built like a tank! Think components all connecting to make the next box sound even better. Amp, Preamp, Tuner, Graphic Equalizer and big wooden tower speakers (could spend more money on these then all of the other components combined). By the late 70's stereo receivers, was not only piratical, but perfected "scientific sound" machines. These would be built with hardwood cabinets, brushed aluminum face plates, with a steel chassis to hold it together (weighing between 40 and 50 pounds).

    I could go on and on about vintage audio, I haven't even mentioned turntables and pick up arms and cartridge for the best way to listen to music (IMOP).

    Aurum - I totally agree with you on vintage receivers, I would not limit myself to just receivers, as there is a lot of collectible audio equipment, just because it's not working doesn't mean it is a scrap item either. Simply put "they will probably never be made like that again".

  8. The Following 4 Users say Thank You for This Post by bigburtchino:


  9. #5
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    I watched the movie 'Black mass' last night, its about Whitey Bulger, a criminal mastermind during the 70's early 80's.
    In it they were using one of these tapedecks too.


  10. #6
    Breakage's Avatar
    SMF Badges of Honor

    Member since
    Aug 2016
    Posts
    297
    Thanks
    242
    Thanked 273 Times in 149 Posts
    I have quite a few receivers and radios, stemming from sort of a fetish I have for vacuum tubes, though most of what I have is not quite that old. I've been wanting to part out some of the less attractive units. Any advice on where the best value for the work involved is to be found? Caps? Boards? Dials?


  11. #7
    SMF Badges of Honor



    Member since
    Apr 2015
    Posts
    2,168
    Thanks
    632
    Thanked 2,503 Times in 1,138 Posts
    OEM GM CB radio with mic in mint condition.

  12. #8
    Kalvlin's Avatar
    SMF Badges of Honor

    Member since
    Dec 2013
    Location
    CT
    Posts
    318
    Thanks
    597
    Thanked 322 Times in 179 Posts
    Oh yea, Vintage receivers have been a money maker for me for a few years. Love the sound from these 70s Pioneer, Onkyo, Marantz, , Scott , Fisher, Yamaha .
    Those are just a few brands I can remember selling over the past 5 or so years. I post them on Craig's List and being close to NYC I get them sold pretty quickly.
    I won't part with my Technics turntables that I used to use for DJ ing cause I still have tons in Vinyl to play on them and there is something to be said for the sound of a needle on a record.
    I got a nice Panasonic receiver with an 8 track player( some of you may not know what that is ) that still plays listed on CL .

  13. #9
    SMF Badges of Honor

    Member since
    Jan 2013
    Location
    Kansas
    Posts
    182
    Thanks
    44
    Thanked 208 Times in 87 Posts
    Quote Originally Posted by Kalvlin View Post
    Oh yea, Vintage receivers have been a money maker for me for a few years. Love the sound from these 70s Pioneer, Onkyo, Marantz, , Scott , Fisher, Yamaha .
    Those are just a few brands I can remember selling over the past 5 or so years. I post them on Craig's List and being close to NYC I get them sold pretty quickly.
    I won't part with my Technics turntables that I used to use for DJ ing cause I still have tons in Vinyl to play on them and there is something to be said for the sound of a needle on a record.
    I got a nice Panasonic receiver with an 8 track player( some of you may not know what that is ) that still plays listed on CL .
    My very first stereo had at the heart of it a Panasonic receiver w/8-track. I remember listening to Steppenwolf "Monster" on it, killer! Recently I came across five JBL studio monitors for $50 for all. I kept the best pair(surrounds were good) and dusted off my Bang & Olufsen turntable. Back in the day I couldn't afford the JBL's. Today they go for $500 per pair. And just a cartridge for my turntable costs $700 today.

  14. The Following User Says Thank You to Flinthills for This Post:


  15. #10
    SMF Badges of Honor

    Member since
    Sep 2022
    Location
    USA
    Posts
    30
    Thanks
    0
    Thanked 1 Time in 1 Post
    Telephones are only getting better every year, and their main advantage is their camera, which allows you to take incredible photos and video content. There are even films that were fully shot on the latest iPhones, and this is not the limit. I recommend to read FactoryOutletStore reviews if you want to buy yourself a new iPhone to create art with it.


  16. Similar threads on the Scrap Metal Forum

    1. Buying cable/sat receivers?
      By jord0690 in forum General Electronics Recycling
      Replies: 18
      Last Post: 12-05-2013, 05:36 PM
    2. Direct TV cable receivers
      By GeorgeB in forum General Electronics Recycling
      Replies: 24
      Last Post: 05-26-2013, 06:26 AM
    3. Birdview Satellite Receivers
      By eAlchemist in forum General Electronics Recycling
      Replies: 11
      Last Post: 02-07-2013, 01:49 AM
    4. Old Stereo Equipment Receivers Are Full Of Goodies
      By Jeremiah in forum General Electronics Recycling
      Replies: 6
      Last Post: 03-25-2012, 01:07 AM
    5. stereo receivers
      By Scrapper2010 in forum Scrap Metal Tips and Advice
      Replies: 1
      Last Post: 12-05-2010, 12:28 PM

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook